Industry Directory | Manufacturer
At Knowles Capacitors we make Multilayer, High Reliability, Single Layer and Precision Variable Capacitors, EMI Filters and Thin Film Devices.
Shenzhen capacitors,the only privately owned capacitors manufacturer in china!
The CF-9 Radial Lead Former forms and cuts 2- and 3-leaded taped radial components such as TO-92s, capacitors, transistors, LEDs, etc. - precisely and repeatedly, in standard and special forms. This machine is capable of forming and cutting up to 25
Form & Cut 2-, 3-, 4-, 5-, and 7-leaded Radial Components Capable of forming loose radial components at rates up to 5,000 parts per hour with a variable speed motor. Feed components by hand or with tubes (TO-220s) Reduce setup time with quick ch
Electronics Forum | Wed Jun 13 16:13:54 EDT 2001 | Igmar
Have anyone seen this problem: Capacitors (100nF 0805) placed on PCB and then appear cracked after reflow. After reflow, the solder joints look visualy acceptable. Then capacitors fail during testing. When attempting to remove capacitor with hot sol
Electronics Forum | Thu Jul 11 06:56:30 EDT 2002 | davef
We have had failure due to a leakage in one ceramic chip capacitor. External inspection did not show any obvious damage. Cross section showed a void in the capacitor. The void was an elliptical shape and positioned longitudinal to the length of the c
Used SMT Equipment | SMT Equipment
Product Name :Panasoinc NPM module Product number: two modules NPM Detailed product introduction 2D inspection head function of NPM tape coating machine: 1, NPM check head resolution: 9 m 2, NPM check head vision: 21.1 * 17.6mm 3, check proc
Used SMT Equipment | SMT Equipment
Product Name :Panasoinc NPM module Product number: two modules NPM Detailed product introduction 2D inspection head function of NPM tape coating machine: 1, NPM check head resolution: 9 m 2, NPM check head vision: 21.1 * 17.6mm 3, check proc
Industry News | 2017-01-26 19:53:00.0
GPD Global will exhibit in Booth 2933 at the upcoming IPC APEX EXPO 2017 scheduled to take place February14-16, San Diego Convention Center. GPD Global will officially launch its new, fully automated dispense platform, Hyperion, and a new, low cost conformal coating system.
Industry News | 2019-01-09 21:58:38.0
GPD Global will exhibit at IPC APEX EXPO 2019. Stop by Booth 2915 to see live demonstrations of machines and equipment. Experts will be there to discuss your production needs. Whether your project requires a pump for retrofitting or a fully automated dispense system, conformal coating, or component preparation, we have a solution for you.
Parts & Supplies | Pick and Place/Feeders
Electrolytic capacitor 33000uF/63V
Parts & Supplies | Pick and Place/Feeders
ELECTROLYTIC CAPACITOR 47000uF/63V
Technical Library | 2019-06-21 10:39:15.0
Recently, an ACI Technologies (ACI) customer called to discuss failures that they had observed with some through-hole capacitor parts. The components were experiencing failures following vibration and accelerated stress testing. Upon receipt of the samples, ACI performed three levels of inspection and Energy Dispersive Spectroscopy (EDS) testing to investigate the root cause of the failures. These analyses enabled ACI to verify the elements comprising the solder joints and make the following recommendations in order to prevent future occurrences. The first inspection was to investigate the capacitor leads using optical microscopy, and no anomalies were found that could indicate bad parts from the vendor or improper handling prior to assembly. However, vertical fill in the barrel of the plated through-holes was too close to the IPC-A-610 minimum specification of 75% to determine a pass/fail condition, and therefore required further investigation.
Technical Library | 2020-04-14 15:56:32.0
This paper will focus on the application requirements of solder printing small aperture designs, concentrating on 008004 (inch) / 0201 (metric) size components, and the results of a design of experiment printing these challenging apertures. As Moore's law continues to be applied to component miniaturization, the next installment of reduced packaging has arrived in the form of the 008004/0201 for resistors and capacitors. Component size roughly the size of a grain of sand presents specific challenges to the solder printing process. To address these challenges, each aspect of the printing process will need be examined. This includes essential machine requirements, including correct squeegee blades, tooling support, and calibrations, to meet the demanding specifications. The correct match and design of materials will be addressed, focusing on the stencil and substrate design along with solder paste and cleaning solvent requirements. A design of experiment will be reviewed that applies the machine and materials discussed, including the printer and Solder Paste Inspection (SPI) setup and the specific machine parameters used. The results of these DOE's will then be closely examined.
The CF-9 Radial Lead Former forms and cuts 2- and 3-leaded taped radial components such as TO-92s, capacitors, transistors, LEDs, etc. - precisely and repeatedly, in standard and special forms. This machine is capable of forming and cutting up to 25
Panasonic Capacitor Feeder Loading the vertical electronic components in feeder, feeder supply components for pick and place machine to plug-ins. Electronic operation，Seamless communication with pick and place machine ，Real-time control,communi
Training Courses | ONLINE | | PCB Assembly Courses
The PCB assembly courses provide knowledge of different processes and equipment used in TH and SMT assembly of printed circuit boards.
Training Courses | | | PCB Rework and Hand Soldering Courses
The PCB rework and hand soldering courses courses cover techniques of rework and repair of PCBs, BGAs and other electronics assemblies, and teach fundamentals of soldering of electronics assemblies.
Events Calendar | Wed Dec 04 00:00:00 EST 2019 - Wed Dec 04 00:00:00 EST 2019 | San Jose, California USA
SMTA Silicon Valley Expo & Tech Forum
Events Calendar | Mon Nov 25 00:00:00 EST 2019 - Mon Nov 25 00:00:00 EST 2019 | ,
Webinar: Overcoming Challenging X-Ray Problems
Career Center | Rochester, New York USA | Engineering
The position is for a Design Engineer specializing in CMOS image array design, designing state of the art image signal processing circuits including low noise amplifiers, switch capacitors, gain amplifiers, and A/D converters.Specializing in CMOS ima
Career Center | Denver, Colorado USA | Engineering
Requirements: 5 plus years experience with active & passive components. Such as resistors, capacitors, diodes, transistors, IC'S, crystals, oscillators, asic's, relays, switches, memory modules, linear logic, mimics, RF discrete devices and multi lay
Career Center | , | Engineering,Maintenance,Technical Support
Dear Sir/Madam, I am having the 10 years exprience in SMT field. Currently I am working in Service industry as Senior Engineer. Specially I am exprience and trained in FUJI and Speedline machines. Earlier I worked with Manufacturing Industry.
Career Center | Fayetteville, Arkansas USA | Engineering,Production
I enjoyed working in Electronics Manufacturing while in college (BSEE) and would like to pursue an engineering job in a related field.
Hermetically Sealed SMD Tantalum Capacitors Hermetically Sealed SMD Tantalum Capacitors by: I.Zednickova, M.Biler, J.Petrzilek, T.Zednicek; AVX Corporation The article presents improvement of stability parameters of tantalum surface mounted
SMTnet Express, January 22, 2015, Subscribers: 22,251, Members: Companies: 14,183, Users: 37,571 High Temperature Ceramic Capacitors for Deep Well Applications. R. Phillips, J. Bultitude, A. Gurav, K. Park, S. Murillo, P. Flores, M. Laps - KEMET
Heller Industries Inc. | https://hellerindustries.com/parts/8130/
8130 - Capacitor bracket Phone 1-973-377-6800 Company About News Events New Equipment Convection Reflow Ovens Reflow Oven MK7 -New
| https://www.feedersupplier.com/sale-13872136-heller-capacitor-run-induction-motor-jf1f071n-1809.html
HELLER Capacitor Run Induction Motor JF1F071N 1809 Leave a Message We will call you back soon! Your message must be between 20-3,000 characters
