Electronics Forum | Fri Dec 15 11:01:14 EST 2017 | robertorocco
I have one Topaz X FNC machine with this problem. The head 2 FNC not change the nozzle. The head 4-6-8 is ok and change, but head 2 no, when he tries to change the nozzle he gives me an error message. What could be the problem?
Electronics Forum | Thu Nov 08 02:09:05 EST 2018 | vinitverma
If the nozzle gets changed properly but the machine still gives the sensor, then the FNC nozzle detection sensor needs to be adjusted. It is a set of 2 sensors on a plate on the either side of the FNC. If the nozzle is not changed successfully and ge
Electronics Forum | Wed Oct 31 13:50:00 EDT 2018 | xenkok555
Check optical head height sensors.
Electronics Forum | Fri May 13 11:00:19 EDT 2005 | geb
I have a Universal GSM which won't change nozzles from the changer. It says something along the lines of "timed out waiting for air pressure to build". Even though it has around 100PSI air pressure. Any ideas how to solve this? Cheers
Electronics Forum | Thu May 19 08:28:08 EDT 2005 | geb
Thanks for everyones help. I have resolved this by filling all but one of the nozzle holders in nozzle changer banks.
Electronics Forum | Fri May 13 18:10:35 EDT 2005 | pde
Make sure all plugs and nozzles occupy the nozzle banks. There should be only one empty position. Make sure all nozzles are fully seated and the machine has the correct location for all of the nozzles. An indication may be the machine is trying to pl
Electronics Forum | Mon May 16 12:39:48 EDT 2005 | JB
Agreed with the previous posts: *Make sure there is one empty nozzle changer per head. *Make sure there are no components on the nozzle changers that prvent the nozzle from seating flush with the changer. *make sure all nozzles are fully seated. *Ch
Electronics Forum | Mon May 16 11:45:35 EDT 2005 | PWH
Agree with PDE. We have two GSM's and we get this error often. Palm down e-stop when you get this error message. Machine will drop nozzle bank down after doing some segment repairs. Open covers and make sure nozzles are seated in reference to ali
Electronics Forum | Mon Aug 31 06:26:44 EDT 2015 | piyakorn
Hi At our SMT mounting found battery clip stick in the reel pocket and some dropped under pick&place machine from the nozzle can not pick out the part which got recommendation should change the nozzle type from standard placement to be clip sho
Electronics Forum | Mon Aug 24 07:52:23 EDT 2015 | roblackey
Can Assembleon Opal nozzles be repaired? I have > a few ith chips on the corners of the tips. It > appears as though the tips are pinned in the > bodies of the nozzles, and that they could be > changed out. Thanks > Can Assembleon Opal nozzl
