Industry Directory | Distributor / Manufacturer
An international distributor of mechanical IC samples or "dummy" components, SMD production tools and equipment
Industry Directory | Distributor / Manufacturer / Other
We are a franchised electronic components distributor. We specialize in passive, discrete and electro-mechanical components
Eliminate Body Stress with Versatile CF-8 GPD's CF-8 eliminates component body stress. Versatility is the key word for the CF-8. Simple tooling changes make short or long run production jobs quick and easy. Capabilities Meets exacting military s
Retrofit existing system with Innovative Dispensing Technology for Excellent Dispense Control and Repeatability Advanced pump technologies available for retrofitting include: True Volumetric Pump, Precision Auger Pump, Simplified Jetting Pump and Ti
Electronics Forum | Fri Sep 26 12:57:09 EDT 2003 | Angie
We have had some components that popped off in our IR oven. It was attributed to the solder paste. The humidity was above 60% the temp was about 70 degrees.
Electronics Forum | Wed Sep 24 08:34:57 EDT 2003 | stefwitt
Even when you run a board several times, the machine may not make the same travel path every time. This in itself does not create a problem, but the vacuum on the nozzles could be different, dependent on the configuration of components on the heads.
Used SMT Equipment | Pick and Place/Feeders
Product number: KE - 3020VA/ VRA Detailed product introduction Constantly improve the KE series products. So as to realize the high speed highquality electric production line of flexible structure. Chip components 20900 CPH chip (laser identific
Used SMT Equipment | SMT Equipment
Product name: KE - 3020 va/VRA general placement machine at a high speed Product number: KE - 3020 va/VRA Detailed product introduction Constantly improve the KE series products. So as to realize the high speed high quality electric production
Industry News | 2017-06-14 10:46:29.0
GPD Global offers uniquely designed 2-part mixing pump to accurately mix and dispense two-part components while eliminating entrapped air.
Industry News | 2016-05-10 14:16:16.0
GPD Global offers individual pumps for integration into your existing platform – the Jetting NCM5000 Pump is one of them. The Jetting NCM5000 Pump simplifies jetting to its basic elements: hammer, pin, and nozzle. Only the pin and nozzle are wetted parts. This means easy set-up, cleaning, and upkeep.
Parts & Supplies | Screen Printers
Product Name: MPM slider 1000150 SLIDE Part Number: 1000150 Description: MPM wiping mechanism slider 1000150 SLIDE Applicable models: UP; AP Printing Presses MPM wiping mechanism slider 1000150 SLIDE Other Other machinery and electrical compon
Parts & Supplies | SMT Equipment
Wiping mechanism slider (1000150) Product Name: MPM slider 1000150 SLIDE Part Number: 1000150 Description: MPM wiping mechanism slider 1000150 SLIDE Applicable models: UP; AP Printing Presses MPM wiping mechanism slider 1000150 SLIDE
Technical Library | 2023-09-16 06:04:19.0
Off-line selective wave soldering machines are the best way to solder complex PCBs. They allow you to solder only the components that need to be soldered, saving time and material.
Technical Library | 2012-12-17 22:05:22.0
Package on Package (PoP) has become a relatively common component being used in mobile electronics as it allows for saving space in the board layout due to the 3D package layout. To insure device reliability through drop tests and thermal cycling as well as for protecting proprietary programming of the device either one or both interconnect layers are typically underfilled. When underfill is applied to a PoP, or any component for that matter, there is a requirement that the board layout is such that there is room for an underfill reservoir so that the underfill material does not come in contact with surrounding components. The preferred method to dispensing the underfill material is through a jetting process that minimizes the wet out area of the fluid reservoir compared to traditional needle dispensing. To further minimize the wet out area multiple passes are used so that the material required to underfill the component is not dispensed at once requiring a greater wet out area. Dispensing the underfill material in multiple passes is an effective way to reduce the wet out area and decrease the distance that surrounding components can be placed, however, this comes with a process compromise of additional processing time in the underfill dispenser. The purpose of this paper is to provide insight to the inverse relationship that exists between the wet out area of the underfill reservoir and the production time for the underfill process.
Eliminate Body Stress with Versatile CF-8 GPD's CF-8 eliminates component body stress. Versatility is the key word for the CF-8. Simple tooling changes make short or long run production jobs quick and easy. Capabilities Meets exacting military s
http://www.gpd-global.com No drip no drool across a wide range of fluid viscosities (low-to-mid and low-to-high). No manual adjustment to compensate for pump variability. Truly Volumetric PCD Pumps for total control of dispensing fluids. Ability to
Training Courses | | | PCB Rework and Hand Soldering Courses
The PCB rework and hand soldering courses courses cover techniques of rework and repair of PCBs, BGAs and other electronics assemblies, and teach fundamentals of soldering of electronics assemblies.
Training Courses | | | PCB Rework and Hand Soldering Courses
The PCB rework and hand soldering courses courses cover techniques of rework and repair of PCBs, BGAs and other electronics assemblies, and teach fundamentals of soldering of electronics assemblies.
Events Calendar | Mon Dec 02 00:00:00 EST 2019 - Mon Dec 02 00:00:00 EST 2019 | ,
Webinar: QFN/LGA Design, Assembly Process Issues & Reliability Failures
Events Calendar | Mon Mar 18 00:00:00 EDT 2019 - Mon Mar 18 00:00:00 EDT 2019 | ,
Webinar: Stencil Design for Solder Paste, In Process Inspection & Process Defects
Career Center | , Kansas USA | Engineering
Our client, a provider of electronic manufacturing services for OEMs within the avionics, computer peripheral, medical and telecommunication industries is currently seeking SMT Maintenance Technicians for 1st and 2nd shift. The successful candidate
Career Center | Neptune, New Jersey USA | Quality Control
QC Inspector for Printed Circuit Assemblies Must have experience in visual inspection of surface mount assemblies and must be able to use a microscope. Must be familiar with surface mount packages and IPC-610 inspection requirements. Must be thor
Career Center | Clearwater, Florida USA | Maintenance,Production,Quality Control,Technical Support
I have approximately 14 years experience in the Electronics manufacturing industry. I have experience from manual assembly to machine technical support for SMT eqiupment. I also have some experience with AI equipment. I have Automatic Optical Inspect
Career Center | garaden grove, California USA | Engineering,Management,Production,Quality Control,Technical Support
11 years experience in SMT process.
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/industrial-coating-systems/additional-product-sub-type/plural-component-systems?con=t&page=36
Plural Component Systems Industrial Coating Systems Corporate | Global Directory | Languages Division Only All of Nordson Application Solutions Powder Coating Liquid Painting Container Coating Sealant Adhesive Systems Automotive Assembly UV Curing Systems Industries Aerospace Agriculture
Qinyi Electronics Co.,Ltd | https://www.qy-smt.com/shop/46750601-cover-clinch-off-189039?page=283&order=name+asc
> UNIVERSAL COVER, CLINCH OFF 46750601 | QYSMT, smt spare parts, ai spare parts, component insertion machine, smd feeder, smt feeder, smt nozzle, smd parts, juki nozzle, smt parts, 46750601 products and services Surplus placement machine