Industry Directory | Manufacturer
Professional in turnkey PCBA service for PCB manufacture, PCB assembly and components sourcing. PCB passed ISO, TS16949, UL, CE and RoHS. PCBA compliant ISO9001 and IPC-A-610E. And components are all new & original.
► Exclusive 15MP CoaXPress Camera System ► Dual Projection Shadow Free Moiré Technology ► Precision Compound Telecentric Camera Lens ► Automated Z-Height Calibration System ► Automated PCB Under Board Support System ► Precision PCB Warpag
► Exclusive 15MP CoaXPress Camera System ► Dual Projection Shadow Free Moiré Technology ► Precision Compound Telecentric Camera Lens ► Automated Z-Height Calibration System ► Automated PCB Under Board Support System ► Precision PCB Warpag
Electronics Forum | Wed Jan 13 19:13:59 EST 1999 | Michael Allen
Just a comment: we've seen PBGAs curl up at the corners, but only on prototype components that came off of a low-volume "prototype" line at our component supplier's lab (non-production overmold material was used). Production parts have not exhibite
Electronics Forum | Thu Jan 14 08:32:22 EST 1999 | Jim Nunns
They are supposed to be production parts. Our volumes are in the hundreds due to rapid change though. Jim Nunns | Just a comment: we've seen PBGAs curl up at the corners, but only on prototype components that came off of a low-volume "prototype"
Used SMT Equipment | Pick and Place/Feeders
Description SIPLACE HS-60 Placement Station Performance Specification ● Placement rate: 60,000 cph ● Placement accuracy: +/- 0.080mm@ 4 sigma ● Component sizes: up to 19.0mm x 19.0mm (0201 chips to PLCC44) ● PCB Dimms (Single conveyor): 50 x 50
.jpg)
Used SMT Equipment | Pick and Place/Feeders
Description SIPLACE HS-60 Placement Station Performance Specification ● Placement rate: 60,000 cph ● Placement accuracy: +/- 0.080mm@ 4 sigma ● Component sizes: up to 19.0mm x 19.0mm (0201 chips to PLCC44) ● PCB Dimms (Single conveyor): 50 x 50
Industry News | 2017-10-17 19:32:15.0
MIRTEC, “The Global Leader in Inspection Technology,” is pleased to announce plans to exhibit its award-winning MV-6 OMNI 3D AOI System in Hall A2, Booth 329 at productronica 2017, scheduled to take place Nov. 14 – 17, 2017 at the Messe München in Germany. Additionally, the company will show the MS-11e 3D SPI, MV-3 OMNI Desktop 3D AOI and INTELLISYS® software.
Industry News | 2013-10-08 15:37:23.0
MIRTEC, “The Global Leader in Inspection Technology”, will exhibit its award-winning line of 3D AOI and SPI Inspection Systems in Hall A2, Stand 578 at the Productronica International Trade Fair, scheduled to take place November 12 - 15, 2013 at the New Munich Trade Fair Centre in Munich, Germany.
Technical Library | 2021-08-25 16:34:37.0
As the traditional eutectic SnPb solder alloy has been outlawed, the electronic industry has almost completely transitioned to the lead-free solder alloys. The conventional SAC305 solder alloy used in lead-free electronic assembly has a high melting and processing temperature with a typical peak reflow temperature of 245ºC which is almost 30ºC higher than traditional eutectic SnPb reflow profile. Some of the drawbacks of this high melting and processing temperatures are yield loss due to component warpage which has an impact on solder joint formation like bridging, open defects, head on pillow.
Technical Library | 2014-03-06 19:04:07.0
Over the last few years, there has been an increase in the rate of Head-in-Pillow component soldering defects which interrupts the merger of the BGA/CSP component solder spheres with the molten solder paste during reflow. The issue has occurred across a broad segment of industries including consumer, telecom and military. There are many reasons for this issue such as warpage issues of the component or board, ball co-planarity issues for BGA/CSP components and non-wetting of the component based on contamination or excessive oxidation of the component coating. The issue has been found to occur not only on lead-free soldered assemblies where the increased soldering temperatures may give rise to increase component/board warpage but also on tin-lead soldered assemblies.
Description SIPLACE HS-60 Placement Station Performance Specification ● Placement rate: 60,000 cph ● Placement accuracy: +/- 0.080mm@ 4 sigma ● Component sizes: up to 19.0mm x 19.0mm (0201 chips to PLCC44) ● PCB Dimms (Single conveyor): 50 x 50
Description SIPLACE HS-60 Placement Station Performance Specification ● Placement rate: 60,000 cph ● Placement accuracy: +/- 0.080mm@ 4 sigma ● Component sizes: up to 19.0mm x 19.0mm (0201 chips to PLCC44) ● PCB Dimms (Single conveyor): 50 x 50
Training Courses | ONLINE | ON DEMAND | PCB Assembly Courses
The PCB assembly courses provide knowledge of different processes and equipment used in TH and SMT assembly of printed circuit boards.
Events Calendar | Mon Apr 23 00:00:00 EDT 2018 - Thu Apr 26 00:00:00 EDT 2018 | Shanghai, China
SMTA China East Conference 2018
Career Center | Phoenix, Arizona | Engineering,Management,Production,Quality Control,Research and Development,Sales/Marketing,Technical Support
• Highly motivated, solution oriented professional with proven record synergizing scientific, engineering, and business administration backgrounds to drive and sustain customer satisfaction and long term improvements. • Articulate communicator that a
Career Center | brampton, Ontario Canada | Engineering,Management,Production,Technical Support
- More than 14 years of experience in set-up, calibrate, program, troubleshoot SMT machines and SMT process, for the manufacturing of PCB Electronic Assemblies - 5 year experience in leading position for electronic manufacturing/Process Engineering.
SMTnet Express, October 3, 2019, Subscribers: 32,260, Companies: 10,890, Users: 25,178 Effects of Temperature Uniformity on Package Warpage Credits: Akrometrix Knowing how package warpage changes over temperature is a critical variable in order
SMTnet Express, July 6, 2017, Subscribers: 30,558, Companies: 10,626, Users: 23,470 Effects of Package Warpage on Head-in-Pillow Defect Zhenyu Zhao, Chuan Chen, Yuming Wang, Lei Liu, Guisheng Zou, Jian Cai and Qian Wang - Tsinghua University
| http://etasmt.com/cc?ID=te_news_bulletin,23570&url=_print
: • Non-coplanar leads on the component • Excessive warpage of the PCB or substrate • Poor wetting • Insufficient amount of solder due to improper printing parameters
Heller Industries Inc. | https://hellerindustries.com/opensor-insufficient-solder/
: Non-coplanar leads on the component Excessive warpage of the PCB or substrate Poor wetting Insufficient amount of solder due to improper printing parameters Skips in the printed solder due to blocked
