Electronics Forum: conducted (Page 1 of 87)

Conductive Paste for Microwave Applications.

Electronics Forum | Thu Sep 03 01:57:11 EDT 1998 | Reginald Aquino

Has anyone know of a low viscosity conductive paste/liquid that has good thermal conductivity? My aim is to get better consistency in the electrical and thermal conductivity between the mounting flange of Microwave power devices and anodised carrier

Conductive inks standards

Electronics Forum | Thu Sep 23 23:29:01 EDT 2004 | Chics

Could someone provide me standards in conductive inks(silver)

Conformal Coat Thermal Conductivity

Electronics Forum | Thu Apr 19 19:31:14 EDT 2007 | davef

Try this: http://www.unitconversion.org/unit_converter/thermal-conductivity.html

Which ESD totes to buy...conductive or dissipative?

Electronics Forum | Fri Sep 09 11:38:48 EDT 2011 | ccross

Try this link http://staticworksflooring.com/articles/understand-conductivity.php

Thermal Conductivity Of Copper

Electronics Forum | Mon Dec 18 17:56:26 EST 2000 | Dave F

Does the thermal conductivity of a copper trace on a printed circuit board change as the copper oxidizes? Is the oxide on copper a thermal insulator? If so, should it be considered in an analysis of thermal resitivity between a ground plane and a h

Conductive Adhesives and Underfill used on flex ckt

Electronics Forum | Mon Jan 11 20:26:54 EST 1999 | Chris G.

I have used conductive adhesives for some time now on thickfilm. Does anyone know of a really good conductive adhesive to attach flip chips to flex circuits? I would like to stencil print the adhesive to the substrate and then place the flips chips

Conductive Adhesive and UV cure adhesives dispensing

Electronics Forum | Fri Feb 21 02:00:53 EST 2003 | successmani

Hi, I would like to know how Conductive adhesives and UV cure adhesives are dispensed. I know that nonconductive adhesives are dispensed through jetter, Auguer pump annd other contact type method. I am puzzled and curious to know whether there is any

electrically conductive adhesives

Electronics Forum | Wed Feb 23 09:33:03 EST 2005 | rlackey

Hi, Does anyone have any experience of using electrically conductive adhesives, including info on the following? 1) Autodispensing/screen printing 2) Curing temps/profiles 3) Quality/conductivity of joint 4) Product recommendations Our customer w

Trays - Conductive vs Anti-Static??

Electronics Forum | Mon Oct 11 05:12:23 EDT 1999 | rjk

I am checking out trays for packing of Simms, and I would like to know what are the main differences between Anti-Static and Conductive trays. Anti-static are cheaper, but I would like to know about properties of one against the other, what are vario

Re: Resistive epoxy

Electronics Forum | Thu Apr 29 18:48:11 EDT 1999 | Kiet Dang

Hi, Did anyone experience a problem with electrically conductive silver filled epoxy is resistive due to galvanic reaction? I'm having this problem when attaching components to Ni plated housing while conducting an experiment to cost reduction for Au

  1 2 3 4 5 6 7 8 9 10 Next

conducted searches for Companies, Equipment, Machines, Suppliers & Information

Benchtop Fluid Dispenser

Have you found a solution to REDUCE DISPENSE REWORK? Your answer is here.
Electronics Decoating Agent

World's Best Reflow Oven Customizable for Unique Applications
Online IPC Training & Certification

MSD Dry Cabinets

무플럭스 리플로우 솔더링을 위한 포름산 리플로우 오븐