cp6 and nozzle and 1 and x and 12mm - SMT Electronics Manufacturing

Electronics Forum: cp6 and nozzle and 1 and x and 12mm (Page 1 of 1)

Fuji CP6 and IP3 specifications request

Electronics Forum | Fri Aug 05 08:15:39 EDT 2016 | jdengler

The IP3 specs are: PCB Dimensions Max: 508 mm x 457 mm - Min: 80mm x 50mm Thickness: 0.8 to 4.0mm Component Capacity Tape: 74 - 8/12mm Device Locations Tray: 40 Locations Placing Rate: 0.55 sec/component for small chips 1.25 sec/component for ICs

I mounted the parts on the buck-boost DCDC converter and measured the characteristics

Electronics Forum | Tue Aug 23 03:29:37 EDT 2022 | samhe

I received a buck-boost DCDC board with an optical sensor from NextPCB, so I mounted the components and measured the efficiency. Table of contents Board received from NextPCB Solder paste printing Mounting of parts Reflow operation check Attaching

cp6 and nozzle and 1 and x and 12mm searches for Companies, Equipment, Machines, Suppliers & Information

cp6 nozzle 1 x 12mm
fuji cp6 24x12mm
22.cp6e 16x12mm 2-feeder
22.cp6e 16x12mm feeder

2.cp6 12x12mm 2feeder
2.cp6 12x12mm mechanical 2feeder
2.cp6 24x12mm 2feeder
2.fuji 2.cp6 24x12mm

2 cp6 and nozzle and 1 and x and 12mm results

Electronics Forum: cp6 and nozzle and 1 and x and 12mm (Page 1 of 1)

Fuji CP6 and IP3 specifications request

I mounted the parts on the buck-boost DCDC converter and measured the characteristics

cp6 and nozzle and 1 and x and 12mm searches for Companies, Equipment, Machines, Suppliers & Information