• 100~130kV 5µm closed X-ray tube, high sensitive image intensifier with 200M mega pixels CCD camera • Multi-function workstation with±70° tilt and X-Y-Z-Q-M multi-axis movement and CNC auto-detect &bu
feature www.shuttlestar-global.com • 90~110kV 5µm closed X-ray tube, 4/2”image intensifier with 200M mega pixels CCD camera • Multi-function workstation with&plus
Electronics Forum | Wed Jan 26 12:22:52 EST 2000 | Mikel Rodriguez
The diode doesn�t appear completely broken. It takes a bit white color (cristal break, I think), instead of the normal red/orange. It works like a 20K-200K ohm resistor. !The diode can be working properly and sometimes change to bad! I think it may
Electronics Forum | Tue Jun 17 09:22:02 EDT 2003 | davef
Higher that recommended is more brittle. Look here: http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=17906 Q2: Will some of my Ceramic Caps crack during the wave soldering process because of the heat? A2: Probably Q3: Can you see any pos
Industry News | 2019-10-22 12:34:34.0
Humitector™ Type 2 delivers advanced sustainable attributes including halogen-free*, cobalt dichloride-free, and reduced cobalt dibromide content The use of Type 2 Humidity Indicator Cards with a non-reversible 60% RH spot indicator is preferred by IPC/JEDEC standard J-STD-033D.
Technical Library | 2021-01-03 19:24:52.0
Reflow soldering is the primary method for interconnecting surface mount technology (SMT) applications. Successful implementation of this process depends on whether a low defect rate can be achieved. In general, defects often can be attributed to causes rooted in all three aspects, including materials, processes, and designs. Troubleshooting of reflow soldering requires identification and elimination of root causes. Where correcting these causes may be beyond the reach of manufacturers, further optimizing the other relevant factors becomes the next best option in order to minimize the defect rate.
Technical Library | 2019-05-21 17:38:55.0
Last month we presented Flip Chip Rework.As promised, this month we follow up with attachment techniques. Flip chip assembly is a key technology for advanced packaging of microelectronic circuits. It allows attachment of a bare chip to a packaging substrate in a face-down configuration, with electrical connections between the chip and substrate via conducting “bumps.” Flip chip technology was first invented by IBM for mainframe computer application in the early 1960s. Semiconductor devices are mounted face down and electrically and mechanically connected to a substrate (Figure 1). IBM called this manufacturing process a C4 process (controlled collapse chip connection).
Humitector™ Type 2 delivers advanced sustainable attributes including halogen-free*, cobalt dichloride-free, and reduced cobalt dibromide content The use of Type 2 Humidity Indicator Cards with a non-reversible 60% RH spot indicator is preferr
SMTnet Express, December 23, 2015, Subscribers: 23,927, Members: Companies: 14,845, Users: 39,621 PCB Fabrication Processes and Their Effects on Fine Copper Barrel Cracks Edward Arthur, Charles Busa, Melissa Durfee, Chad Gibson, Wade Goldman P