Industry Directory: de-ionized water requirements (17)

Process Technology

Process Technology

Industry Directory | Other

Process Technology is a wet process heating and cooling equipment manufacturer offering electric immersion heaters, inline heaters, heat exchangers, and temperature and level controls.

Synova S.A.

Synova S.A.

Industry Directory | Manufacturer of Assembly Equipment

Synova is an experienced manufacturer of innovative laser cutting systems for an extraordinary range of micro-machining and dicing applications.

New SMT Equipment: de-ionized water requirements (1883)

Voidless / Vacuum Reflow Soldering Oven - 1809 MK5

Voidless / Vacuum Reflow Soldering Oven - 1809 MK5

New Equipment | Reflow

1809 MK5 - Heller Advanced In-Line Vacuum Reflow Oven Nitrogen System with Balanced Flow Technology 9 Top And Bottom Heated Zones - highest zone count per linear foot in the industry! 100" Heated Length - for super throughput! 2 Internal C

Heller Industries Inc.

SMT Dispensing Pumps for Integration

SMT Dispensing Pumps for Integration

New Equipment | Dispensing

Retrofit existing system with Innovative Dispensing Technology for Excellent Dispense Control and Repeatability Advanced pump technologies available for retrofitting include: True Volumetric Pump, Precision Auger Pump, Simplified Jetting Pump and Ti

GPD Global

Electronics Forum: de-ionized water requirements (333)

de-ionized water

Electronics Forum | Tue Jun 05 10:14:29 EDT 2007 | cwright

Question: What is the standard for de-ionized water in smt field if any at all. Would it be more cost effect to buy an de-ionizer then to buy the water? If so can you point me in the right direction. Thank-You

de-ionized water

Electronics Forum | Tue Jun 05 10:24:46 EDT 2007 | russ

De ionized is de-ionized. Contact your local water supplier such as culligan or whoever. They can give you the rundown on leasing or buying tanks, etc... Your cleaner will have to have some type of provision for adding external filtration/deioniza

Used SMT Equipment: de-ionized water requirements (25)

Thermotron S-16-8200 Temperature Chamber

Thermotron S-16-8200 Temperature Chamber

Used SMT Equipment | General Purpose Test & Measurement

Thermotron S-16-8200 Temperature Chamber. This item is USED. Heats well. Cooling couldn't reach lowest advertised temp. Unknown/untested is refrigerant needs a re-charge. Please see photos. Item is sold as pictured. The Thermotron SM-16-8200

World Equipment Source / R1 Source, Inc.

ASM Siemens ASM SIPLACE HF-3/A516-12033248

ASM Siemens ASM SIPLACE HF-3/A516-12033248

Used SMT Equipment | Pick and Place/Feeders

Siemens HF3, HF multi-function placement machine Siemens placement machine HF3 parameters: 1. Placement head type: dual placement heads and 12-nozzle collection and placement heads and/or 6-nozzle collection and placement heads and IC heads 2. Num

Qinyi Electronics Co.,Ltd

Industry News: de-ionized water requirements (381)

Retrofit Your System with True Continuously Volumetric Dispense Technology

Industry News | 2016-07-16 13:32:29.0

Advanced dispense technology is available for integration into your dispensing system. Continuously Volumetric, drip-and-drool free dispense technology can now be retrofitted into your dispense robot. GPD Global's Volumetric PCD pumps ensure the success of applications like underfill, LED encapsulation, solder mask, silicones, conductive ink, conformal coatings, and more. Improve your throughput and yields by retrofitting a Volumetric PCD Pump into your dispense system to simplify the dispense process.

GPD Global

Revive Your Dispenser with Advanced Dispense Technologies

Industry News | 2016-12-09 23:33:42.0

GPD Global offers advanced dispense pump technologies to upgrade your existing platform and take advantage of existing capital equipment. Retrofit your system with innovative dispensing technology for excellent dispense control and repeatability.

GPD Global

Parts & Supplies: de-ionized water requirements (4)

ASC International 3D SPI-7500 Vision CE

ASC International 3D SPI-7500 Vision CE

Parts & Supplies | SPI / Solder Paste Inspection

Quick programming, friendly programming interface Multiple measurement methods True one-button measurement Eight-way motion button, one-click focus Adjustable scanning pitch Solder paste 3D simulation function Powerful SPC function MARK

KingFei SMT Tech

Fuji CNSMT GGGC1170 GGGC1180 Cover XPF element camera cover

Fuji CNSMT GGGC1170 GGGC1180 Cover XPF element camera cover

Parts & Supplies | Assembly Accessories

CNSMT GGGC1170 GGGC1180 Cover XPF element camera cover CNSMT GGGC1170 GGGC1180 Cover XPF element camera cover KGA-M3455-11X Yamaha chip mounter YV100XG YG200 FEEDER radio fiber amplifier KGA-M3455-11X Yamaha chip mounter YV100XG YG200 FEEDER r

CNSMT CO.LTD

Technical Library: de-ionized water requirements (220)

Conductive Adhesive Dispensing, Process Considerations

Technical Library | 1999-08-27 09:24:56.0

Dispensing conductive adhesives in an automated factory environment creates some special challenges. A robust production process starts with understanding the adhesives in their fluid state and which important parameters must be controlled. Developing this understanding requires experience with a large number of materials and valves over time. Common uses of conductive adhesives in surface mount applications, die attach applications, and gasketing are addressed. As vendors of dispensing equipment, the authors see a constant stream of such applications. Dispensing requirements, techniques, and equipment resulting from this experience are discussed. Guidelines for optimizing quality and speed are given.

Nordson ASYMTEK

Higher Defluxing Temperature and Low Standoff Component Cleaning - A Connection?

Technical Library | 2020-11-04 17:49:45.0

OEMs and CMs designing and building electronic assemblies for high reliability applications are typically faced with a decision to clean or not to clean the assembly. If ionic residues remain on the substrate surface, potential failure mechanisms, including dendritic growth by electrochemical migration reaction and leakage current, may result. These failures have been well documented. If a decision to clean substrates is made, there are numerous cleaning process options available. For defluxing applications, the most common systems are spray-in-air, employing either batch or inline cleaning equipment and an engineered aqueous based cleaning agent. Regardless of the type of cleaning process adopted, effective cleaning of post solder residue requires chemical, thermal and mechanical energies. The chemical energy is derived from the engineered cleaning agent; the thermal energy from the increased temperature of the cleaning agent, and the mechanical energy from the pump system employed within the cleaning equipment. The pump system, which includes spray pressure, spray bar configuration and nozzle selection, is optimized for the specific process to create an efficient cleaning system. As board density has increased and component standoff heights have decreased, cleaning processes are steadily challenged. Over time, cleaning agent formulations have advanced to match new solder paste developments, spray system configurations have improved, and wash temperatures (thermal energy) have been limited to a maximum of 160ºF. In most cases, this is due to thermal limitations of the materials used to build the polymer-based cleaning equipment. Building equipment out of stainless steel is an option, but one that may be cost prohibitive. Given the maximum allowable wash temperature, difficult cleaning applications are met by increasing the wash exposure time; including reducing the conveyor speed of inline cleaners or extending wash time in batch cleaners. Although this yields effective cleaning results, process productivity may be compromised. However, high temperature resistant polymer materials, capable of withstanding a 180°F wash temperature, are now available and can be used in cleaning equipment builds. For this study, the authors explored the potential for increasing cleaning process efficiency as a result of an increase in thermal energy due to the use of higher wash temperature. The cleaning equipment selected was an inline cleaner built with high temperature resistant polymer material. For the analysis, standard substrates were used. These were populated with numerous low standoff chip cap components and soldered with both no-clean tin-lead and lead-free solder pastes. Two aqueous based cleaning agents were selected, and multiple wash temperatures and wash exposure times were evaluated. Cleanliness assessments were made through visual analysis of under-component inspection, as well as localized extraction and Ion Chromatography in accordance with current IPC standards.

ZESTRON Americas

Videos: de-ionized water requirements (29)

Voidless / Vacuum Reflow Soldering Oven - 1809 MK5

Voidless / Vacuum Reflow Soldering Oven - 1809 MK5

Videos

1809 MK5 - Heller Advanced In-Line Vacuum Reflow Oven Nitrogen System with Balanced Flow Technology 9 Top And Bottom Heated Zones - highest zone count per linear foot in the industry! 100" Heated Length - for super throughput! 2 Internal C

Heller Industries Inc.

No drip or drool across a wide range of fluid viscosities (low-to-mid and low-to-high) with GPD Global PCD Pumps for total control of your dispensing fluids.

No drip or drool across a wide range of fluid viscosities (low-to-mid and low-to-high) with GPD Global PCD Pumps for total control of your dispensing fluids.

Videos

http://www.gpd-global.com No drip no drool across a wide range of fluid viscosities (low-to-mid and low-to-high). No manual adjustment to compensate for pump variability. Truly Volumetric PCD Pumps for total control of dispensing fluids. Ability to

GPD Global

Events Calendar: de-ionized water requirements (3)

NanoProof® PCB Waterproofing Webinar

Events Calendar | Wed Jan 27 16:00:00 EST 2016 - Wed Jan 27 17:00:00 EST 2016 | Austin, Texas USA

NanoProof® PCB Waterproofing Webinar

Aculon

NanoProof PCB Repellency - Case Studies - Free Online Webinar

Events Calendar | Wed Jul 20 16:00:00 EDT 2016 - Wed Jul 20 17:00:00 EDT 2016 | , USA

NanoProof PCB Repellency - Case Studies - Free Online Webinar

Aculon

Career Center - Resumes: de-ionized water requirements (6)

Sr. Process & Quality Engineer

Career Center | Houston, Texas USA | Engineering,Management,Quality Control,Technical Support

Seasoned Process & Quality Engineer. Degreed Chemical Engineer. 20+ years in Electronics Semiconductor manufacturing. Proficient in Quality Statistical tools, Design of Experiments, FMEAs, APQP, PPAP, ISO 9000, ISO/TS 16949 etc.

Security Systems Engineer

Career Center | TRIVANDRUM, kerala India | Engineering,Maintenance,Research and Development

System Integration, Software Configuration Project Implementation & Commissioning Installation and Servicing of CCTV,Access Control,Public Address systems, Fire & Alarm Security System, Biometric Attendance System. Language Skills-C, C++,UNIX,LIN

Express Newsletter: de-ionized water requirements (526)

Partner Websites: de-ionized water requirements (725)

AMTECH NWS-4400-HA-TF Water-Washable Lead-Free Tacky Solder Flux (REM1 – Precision PCB Services, Inc

Precision PCB Services, Inc | https://precision-pcb-services-inc.com/products/amtech-nws-4400-ha-tf-water-washable-lead-free-tacky-solder-flux-rem1

: As a rule of thumb removing M1/H1 flux residues is paramount, however it is an easy task – use warm de-ionized water at 40-60°C with recommended water pressure of 30-50 PSI –  NWS

Precision PCB Services, Inc

First Place Machinery Featured 2

1st Place Machinery Inc. | http://www.firstplacemachinery.com/first_place_featured2.html

60Hz Disconnect Breaker: 60 Service Amps Heat Rejection to Room: 78,000 BTU/hr maximum Humidity Water: 0.2 to 10 μS/cm resistivity (de-ionized water recommended

1st Place Machinery Inc.


de-ionized water requirements searches for Companies, Equipment, Machines, Suppliers & Information

Sm t t t t t t t t t t net
  1 2 3 4 5 6 7 8 9 10 Next
SMT spare parts - Qinyi Electronics

Used Coherent Verdi V18 SOLID-STATE Diode-Pumped Laser for sale. Call (858) 693-1991
MSD Dry Cabinets

Reflow Soldering 101 Training Course
Assembly Automation Technology