Electronics Forum | Mon Oct 11 17:02:06 EDT 2004 | M Deren
We have a DEK 260 with a intermittant table align stepper motor problem. The machine will work fine for awhile and then one of the table align motors starts either moving hapazardly in small increments back and forth or vibrates as if it wants to mov
Electronics Forum | Mon Oct 11 17:06:55 EDT 2004 | M Deren
We have a DEK 260 with a intermittent table align stepper motor problem. The machine will work fine for awhile and then one of the table align motors starts either moving haphazardly in small increments back and forth or vibrates as if it wants to mo
Electronics Forum | Mon Aug 23 10:28:51 EDT 1999 | K
You should have no problems with this. Are you thinking of buying one or do you already have one - either way it would be worth upgrading to DeKAlign 4 K | Does anyone have an older DEK 260? I was wondering if a 1995 model 260 with DeKAlign 2 is
Electronics Forum | Mon Feb 20 17:56:46 EST 2006 | Chris
If you are running FR4 PCBs and not something exotic like Kapton flex circuits, I would go with the Dek 265 any day of the week. You will find that Dek supports the fully automatic printer much better than the semiautomatic printers like the 260, 24
Electronics Forum | Tue Jul 13 16:50:20 EDT 1999 | Boca
| We are looking to automate the paste printing portion of our SMT process. We are looking at used equipment from DEK and MPM from 1994 onward.(DEK 260 & 265 MPM AP20 & AP27) Does anyone have some feedback or concerns with any of these machines? Does
Electronics Forum | Mon Feb 24 12:14:07 EST 2003 | gilligan
We use an EKRA E4 printer, but the concept sounds the same as far as the fiducial alignment goes. I have found that SOT-23 components work the best for fiducials - and I always make it a point to use them on our older PCB's (where the screens do not
Electronics Forum | Tue Dec 03 07:57:27 EST 2002 | pjc
Price of DEK 248 and MPM UP100 are about the same, $22-36K range. MPM UP100 has programmable squeegee pressure. Precise, repeatable results with less operator involvement. Pressure parameters saved in board program file. DEK 248 has manual microm
Electronics Forum | Fri Feb 14 08:08:45 EST 2003 | Louis
First of all I would like to say that my English is so-so but I will try to help you. FOLLOW THOSE STEPS AND YOU WILL BE OK. 1-- select learn fiducial option then enter minimal value to fiducial width and height (enter 0 and you will g
Electronics Forum | Mon Apr 19 15:27:05 EDT 2004 | pjc
The MicroFlex is not really new. Its the UltraPrint 100 re-engineered and improved. UltraPrint 100 / SMTech 100 has been around for many years. I don't believe the DEK 248 offers a Stencil Wiper option. I worked on MicroFlex machines. Vision system i
Electronics Forum | Tue Jan 12 14:59:14 EST 1999 | Earl Moon
| What would be a good metric for process control of a stencil printer? (fully automatic, vision equipped, stendil printer). | I'm doing some more DEK 265 GSX's with everything imaginable hung on them. Have done Lt's and the MPM2000. This makes mach
.gif)
