Manufactures a wide range of environmental test solutions capable of temperature and humidity cycling, thermal shock, production stress screening, accelerated stress testing, combined environment testing, controlled humidity exposure.
Viconics� mission is to provide value and innovation in microcomputer-based temperature and humidity controls for the commercial HVAC market. Products range are controls, from thermostats and humidistats to sophisticated heat pump controls.
-11.jpg)
New Equipment | Solder Paste Stencils
EbyDEK printer specification： ①Automatic Fiducial Setup ②Fast Print Speed ③Networking ④Small Fiducial ⑤Speed Up ⑥Tooling Deviation Monitoring ⑦Vision Plus ⑧Windows 7 Operating System Specify ①Blue USC Alternative Park ②DUI Hardware And Time To Go
2.0 Cmk @ ± 25 μm Substrate thickness: 0.2 mm to 6 mm INQUIRY DEK Stencil Printer E Seriels Specifications: Quality DEK’s experienced printing specialists have developed an innovative platform for E by DEK with high-quality components, so
Electronics Forum | Tue Apr 13 14:49:15 EDT 2010 | davef
90%) from the sample, and the bake time and temperature specified herein are minimums. To improve test accuracy, or to prevent heat damage, other bake parameters may be AABUS. 2 Applicable Documents IPC-QL-653 Certification of Facilities that Inspect
Electronics Forum | Thu Apr 12 00:56:20 EDT 2007 | Jani
Our SMT production and storage area is air-conditioned, constant temperature is maintained but the humidity is not controlled , the raw SMT material is stored in a "Drier" cabinet, but since we assemble hybrid SMT and thru-hole PCB assemblies, the SM
Used SMT Equipment | Screen Printers
EbyDEK printer specification： ①Automatic Fiducial Setup ②Fast Print Speed ③Networking ④Small Fiducial ⑤Speed Up ⑥Tooling Deviation Monitoring ⑦Vision Plus ⑧Windows 7 Operating System Specify ①Blue USC Alternative Park ②DUI Hardware
Used SMT Equipment | Screen Printers
2.0 Cmk @ ± 12.5 μm (± 6 sigma) System alignment capability > 2.0 Cmk @ ± 25 μm (± 6 sigma) Optimum core cycle time 8 seconds Substrate size 50 mm (X) x 40.5 mm (Y) to 620 mm (X) x 508.5 mm (Y) Operating System Windows 7 Embe
Industry News | 2003-06-23 08:49:39.0
Three Organizations from the US, Europe and Japan to
Industry News | 2019-10-16 14:45:19.0
MIRTEC announces that the company will premier its all-new ALPHA 3D Automated Optical Inspection System at productronica 2019. New to this event, Messe München and Konradin Verlag have organized a 3D AOI Arena in Hall A2. Leading 3D AOI manufacturers such as MIRTEC will demonstrate their latest 3D Inspection Technology at this four-day event scheduled to take place Nov. 12-15, 2019, at the Munich Trade Fair Center in Munich, Germany.
Parts & Supplies | Pick and Place/Feeders
This splice tape is used for jointing carrier tapes in the SMT process, It is made of 2 silver tapes and release paper. Size: 8mm, 12mm, 16mm, 24mm Main Characteristic 1, Peeling-off force(N/25mm)by angle of 180 degree. 2,Retaining(H/25*25mm)
Parts & Supplies | SMT Equipment
The AEC series is an ideal standard aluminum electrolytic capacitors in a broad range of consumer, industrial and automotive electronics applications requiring extend life , extended temperature range , and low profile . The ROHS-compliant series c
Technical Library | 2019-12-12 02:43:44.0
Today we discuss the reason that causes temperature humidity chamber to alarm,In most cases, the equipment alarm is caused by the improper operation in the process of use, which mainly includes following reasons:that are refrigeration system, temperature system and circulating system. First, Refrigeration system 1, refrigeration compressor overpressure alarm. If the refrigerant pressure exceeds the set value, it will stop and alarm at the same time. At this time, the fault must be eliminated and then manually reset. 2, short phase power supply, phase sequence alarm. When the external power supply of the equipment is out of phase or the phase sequence is changed, it will stop and alarm at the same time. 3. The circulating cooling water is short of water to alarm. When the water pressure of the cooling circulating water system is insufficient, it will stop and alarm at the same time, and it must wait for the fault to be eliminated and reset at the same time before it could run normally. 4, refrigeration compressor overheating alarm. When the coil of the compressor is overheated and the power supply of the line is not normal, it will stop and alarm at the same time. Second, Temperature system 1, the overtemperature alarm in the chamber. The sensors in the channel and the sample area are equipped with overtemperature protection devices, and there are also overtemperature protecter on the control panel. When the temperature in the working chamber exceeds the setting value on the controller, it will stop and alarm. 2. sample overtemperature protection. When the temperature in the sample area exceeds the protection temperature set by the controller, it will stop and alarm at the same time. The overtemperature protection of the sample is divided into upper limit protection and lower limit protection, which can be set according to the demand, Third,Circulating system 1. The alarm is caused by the overheating of the circulating fan. When the coil of the fan is over-heated, the alarm will be stopped at the same time. 2. The fan over-current alarm. When the current of the fan exceeds the allowable value, the alarm is stopped at the same time, and the normal operation can only be carried out after the fault maintenance of the overcurrent is completed. This is what we talk about today,if you have more questions,let us know.
Technical Library | 2019-11-17 22:46:45.0
Overview of walk-in temperature and humidity chamber: It also belongs to environmental test equipment, it tests whether the product can resist high temperature, low temperature, humidity, or the physical and chemical changes produced under extreme conditions, the walk-in temperature and humidity chamber volume is large, the product is placed, or a large object can be placed, such as automobile, new energy, television and liquid crystal screen, etc. How to do the routine maintenance of the walk-in temperature and humidity chamber: 1. The wet gauze basically, if there is no special case, s/b usually changed once in 3 months 2. The water channel shall be regularly cleaned, including water cup, water tank, etc., so as to prevent the water from being blocked,affect the humidity test. 3. It is forbidden to test the flammable and explosive products inside working room. 4. Clean the chamber on a regular basis 2. How to operate walk-in temperature and humidity chamber: The operation method is same as standard temperature humidity test chamber,the controller is 7-inch LCD programmable color screen, you only need to setthe temperature point---test time--how many cycles need to be tested, This can be done automatically, and the machine will stop automatically when it is complete. If there is any problem during the operation, the corresponding problem point will be displayed on the machine control screen. Walk-in temperature and humidity chamber is a must equipment for reliability test of Automobile,Aerospace,Electronic parts,etc,the operation and maintenance are easy,it is teh tear down mahcine,Climatest engineers will be dispatched to do on-site support,for instance,we will finish commissioning,train customers how to operate,maintain,welcome to follow our company facebook page:https://www.facebook.com/Climatechambers
The ASYMTEK Qadence™ closed-loop flow control system maintains a stable flow rate by volume for high quality conformal coating results – automatically compensating for viscosity changes related to temperature, humidity and batch-to-batch variation.
ACI Technologies Inc. (ACI) is a scientific research corporation dedicated to the advancement of electronics manufacturing processes and materials for The Department of Defense and industry. This video provides an overview of our commercial service
Events Calendar | Tue Aug 18 00:00:00 EDT 2020 - Tue Aug 18 00:00:00 EDT 2020 | ,
How to Minimize Humidity Interaction with PCBAs for Robustness
Events Calendar | Wed Apr 18 00:00:00 EDT 2018 - Thu Apr 19 00:00:00 EDT 2018 | ,
Stencil Printing Process and Solder Paste Inspection – An In-Depth Look - SMTA Webtorial
Career Center | San Pedro Sula, Cortes Honduras | Engineering,Maintenance,Management,Technical Support
Preventive maintenance on SMT machines. Corrective maintenance on SMT Machines Schedule of preventive maintenance programs. Minimum Inventory control for spare parts Automation process on SMT Lines Work Instructions for maintenance procedur
Career Center | Sta. Rosa, Philippines | Maintenance,Production,Technical Support
Complete knowledge in smt,aoi and reflow. 11 years working experienced in production and 5 years experienced in the field service job.
| https://www.smtfactory.com/What-is-the-function-of-the-temperature-and-humidity-sensor-in-Lyra-Reflow-Oven-id44562477.html
What is the function of the temperature and humidity sensor in Lyra Reflow Oven? - I.C.T SMT Machine English Bahasa indonesia Сербия
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/asymtek/your-process/fluid-types/rtv-silicone
Room Temperature Vulcanizing (RTV) Silicone ASYMTEK Products Corporate | Global Directory | Languages Division Only All of Nordson Fluid Dispensing Systems Jets
.gif)
