Electronics Forum | Tue Apr 23 15:18:02 EDT 2013 | davef
2 oz copper should be 2 oz per ft^2 thick. There is no relationship between thickness and copper weight due to the effect of processing. Since this is a painful way of thinking about things, ppl have reached a compromise and talk about 'nominal thick
Electronics Forum | Thu Jan 04 12:51:37 EST 2007 | Board House
Hi Chunks, Starting copper on outer layer with .0007 is 1/2 oz. copper foil. so if starting copper is .0007 and your Board house will plate an additional .0021 mils of copper. which will give you a finished copper weight of .0028 Mils or (2 oz.) Y
Electronics Forum | Wed Dec 03 16:39:49 EST 2008 | bandjwet
Hi All: Does anyone know how to specify or buy 1oz copper foil in a sheet format? Thanks BWET
Electronics Forum | Thu Jan 04 08:33:08 EST 2007 | davef
You cannot determine foil thickness from its weight per area, because of the significant variation in the density of electrodeposited [ED] copper. But people don't care. They do it regardless. (oz/ft2)||(mils)||(mm) 1/2||0.7||17.8 1||1.4||35.6 2||2
Electronics Forum | Tue Dec 09 18:03:39 EST 2008 | davef
First, you cannot determine foil thickness from its weight per area, because there is significant variation in the density of electrodeposited copper. Second, the official IPC specification for minimum thickness is "after" processing by the fabricat
Electronics Forum | Thu Jun 10 11:23:10 EDT 1999 | Gang Pan
| | I am starting a new project which involve 3 oz copper layer with 20 mil components on the top of the board and 0.040" thick copper with D2Pak on the bottom of the board. | | There is anybody has experience on metal-based PCB reflow process? I g
Electronics Forum | Wed Jun 09 17:29:59 EDT 1999 | Earl Moon
| I am starting a new project which involve 3 oz copper layer with 20 mil components on the top of the board and 0.040" thick copper with D2Pak on the bottom of the board. | There is anybody has experience on metal-based PCB reflow process? I guess
Electronics Forum | Thu Jun 10 12:10:41 EDT 1999 | Earl Moon
| | | I am starting a new project which involve 3 oz copper layer with 20 mil components on the top of the board and 0.040" thick copper with D2Pak on the bottom of the board. | | | There is anybody has experience on metal-based PCB reflow process?
Electronics Forum | Wed Jan 13 04:27:00 EST 2016 | crystalpcb
Hi Here is our factory production capability: Shenze Electronic PCB Specification Layer Count 1 to 35 Layers Material Brand Shengyi,KB,GRACE,ISOLA,Rogers,Taconic,ARLLON,Bergquist Base Material FR-4(TG135,TG150,TG170,TG180),Halogen Free FR-4,Ceramic
1 |