Electronics Forum | Sat Jun 07 09:05:58 EDT 2003 | Mike
We have opened a site for people to post parts, request parts, etc. It is the Global Parts Repository. It is mainly electronic and mechanical parts that we have in mind: http://www.info-services.net/gpr
Electronics Forum | Sun Sep 21 19:23:25 EDT 2003 | Mike
The GPR is growing. Visit and submit parts or requests for parts. http://www.info-services.net/gpr To see all of the parts, visit http://www.info-services.net/gpr/allparts.html
Electronics Forum | Fri May 22 22:13:18 EDT 2020 | gabriel1blue
Hi guys we had problems with our old pick and place machines and all the parts data and mark data was lost when we had to restart the machine. We made a copy but it has been so long that we used it that now it's not working. I hope someone has one of
Electronics Forum | Mon Jul 13 06:30:59 EDT 2009 | hcarrasco
1.- Check your vacuum a.- Check filters b.- Check air flow (the vacuum is generated by a Ventury using air flow, not air pressure) c.- Vaccum vias (Possible linth inside the vacuum lines) 2.- Check the nozzle condition (Probably broken o
Electronics Forum | Mon Jul 13 14:41:23 EDT 2009 | snsmt
most of the problems tend to be with TANT components and a few 0603 chips.
Electronics Forum | Tue Jul 14 14:42:30 EDT 2009 | snsmt
The Tant size is 3528-21. I use type 72 nozzle for it.
Electronics Forum | Fri Jul 10 18:15:33 EDT 2009 | snsmt
Hello everyone, i have a few questions regarding dropped components. I have a Philips Topaz X and it has been dropping components. I would like to know what causes them to drop. I know parts can be mispicked from time to time. This is very genera
Electronics Forum | Mon Jul 13 13:48:37 EDT 2009 | christian01976
Hello! You can check your vacuum in MANUAL and then VACUUM IN MONITOR. You can switch the vacuum on or off for each head. With a TYPE 72 nozzle and no component the vacuum should be around 80 or 90 and with a component at the nozzle it should be ove
Electronics Forum | Sat Jul 11 02:07:44 EDT 2009 | christian01976
Hello sny! At what time does the Topaz drop the components? Directly after picking or after recognizing on the way to the mount position?
Electronics Forum | Sun Jul 12 21:15:31 EDT 2009 | padawanlinuxero
a more general solution is have you done some cleanning in the vaccumm for the nozzles? change the filters or filter?
.gif)
