Electronics Forum | Thu Jun 19 09:33:09 EDT 2008 | stevenvl
Hi, I'm having issues with boards sticking/jamming along the line, as well as what seems to be excessive wear along the guide rails. The boards are an Alumina Ceramic material and the rails differ by machine, but include anodized aluminum, steel, de
Electronics Forum | Mon Dec 14 09:22:04 EST 2009 | jammm
I need to profile a single sided board thats width is less than the profiler. Is there a difference in profiles when one is completed using the rail conveyor versus just laying the board and profiler on the mesh conveyor?
Electronics Forum | Mon Dec 14 13:55:24 EST 2009 | dyoungquist
Yes, there will be a difference. When the board is on the rail conveyors it is closer to the top heaters and farther away from the bottom heaters than when on the mesh conveyor. That difference will create different temperatures on both sides of yo
Electronics Forum | Wed Oct 17 17:51:13 EDT 2007 | jmelson
Yes, mostly. The computer just has a setting for which size frame it is in (66, 84 or whatever). The bearing slider is almost certainly the same, too, although the rails are a different length. As best as I can tell, my 1306/20 (which is NOT a III
Electronics Forum | Tue Aug 13 06:23:51 EDT 2013 | mccabekev
We are running a Heller 1707 EXL reflow oven, but we have a temperature variation across the board. When the oven first comes up to temperature, the centre of the board is 10degC hotter than the inside rail which is a further 10degC hotter than the
Electronics Forum | Tue May 11 12:29:47 EDT 2021 | markhoch
Yes Sir, Dual Lane. Different terminology in different parts of the world. Germans and Chinese refer to dual conveyor systems as "dual rail". I guess I've been working with them for too long. I will look into CTI, although I was hoping to find somet
Electronics Forum | Tue Apr 24 09:19:51 EDT 2018 | vetteboy86
Is there a preferred method among printed circuit board assembly for accurately and quickly verifying the copper weight of a printed circuit board? I would like a tool and process that our quality inspector could quickly use to verify upon receipt of
Electronics Forum | Wed Oct 17 12:48:30 EDT 2007 | jmelson
You might have to replace both entire linear rails, and then realign the axes for orthogonality. It depends on whether they can come up with a rail/slider that has the same height as the existing one. Bummer that NSK has obsoleted that rail design.
Electronics Forum | Wed Nov 08 12:21:23 EST 2006 | SWAG
A little more detail on our application: It is a large fixture (approx. 15" x 18") that spans the chain fingers in the reflow. It has several cut-outs and reductions in thickness to allow for better heat distribution. It worked well/stayed flat fo
Electronics Forum | Fri Dec 18 12:43:34 EST 2009 | gazupfer
jamm, As with the other answers you've received, I agree there will be a difference. The question is will the difference between the temperatures of the product profiled at the mesh belt put you out of spec when you run production on the rail? the ke
.gif)
