Electronics Forum | Tue Sep 23 14:29:34 EDT 2008 | realchunks
I have shlves with rollers and a stop on one end. Boxes go in one end and roll towards the other. One end for people to pull from, the other is to load. I have bunch left over and willing to sell cheap. Let me know if you want them.
Electronics Forum | Mon Mar 26 09:41:03 EDT 2018 | fuji_user_2014
Hi Gurus, Looking for alternatives to line makeup after reflow oven. Currently, I have a continuous on flat belt conveying out of my reflow oven straight to an EOL bench. The operator manually picks up the board off the belt (there is a roller at t
Electronics Forum | Mon Mar 26 16:58:53 EDT 2018 | solderingpro
Is there anything stopping you from replacing the flat belt solution to a continuous running steel roller chain conveyor? - From there (depending upon board temperature) you should be able to buffer your boards in a vertical buffer station if neede
Electronics Forum | Fri Sep 23 08:16:57 EDT 2005 | gregp
Base, You are absolutely correct. This is what I intend to do. In fact, our feeders at one time had reel hangers that would allow for reel removal and thus splicing. Sometimes it is frustrating when people are set in their ways and won't consider
Electronics Forum | Fri Sep 23 10:25:40 EDT 2005 | gregp
On our machines, the feeder release latch is designed such that the feeder goes offline (machine will not pick from it) before you can actually remove the feeder. This makes it virtually impossible to damage a nozzle or spindle. I'm not sure about
Electronics Forum | Fri Mar 24 08:06:12 EST 2006 | Loco
You do know what will happen if Europes eco deskjockey politicians get a hold of this document, don't you Patrick? SAC will be next on the scraplist. I thought VOC was the next thing to go, but this looks equally bad. I've thought of another brill
Electronics Forum | Wed Dec 25 02:38:32 EST 2013 | alexeis
Hi, If you are on SMT process, you may check our product, called QPlace UPD, for updating ECN/ECO and Board Modes directly on previous/different version of PCB including delta list of all differents that can be used on next production steps. Feel f
Electronics Forum | Mon Feb 26 10:02:27 EST 2007 | Cal
Pay Recyclers: Ecological Technologies, Inc. 1230 Oakmead Parkway, #308 Sunnyvale, California 94085 U.S.A Phone: 408.524.7100 ;Fax: 408.524.7103 http://www.eco-tech.com/index.shtml OR The SemiCycle Foundation 2111 Kramer Lane Austin, Texas 78758
Electronics Forum | Thu Dec 26 04:24:56 EST 2013 | aflex
Looking for printed circuit board manufacturer and designer contact us for any kind of PCB assembly -
Electronics Forum | Fri Dec 20 06:21:10 EST 2013 | bandjwet
When you need a few board modifications made such as cutting some traces or adding pads/traces and you do not have time for a board spin or have lots of pricey boards with mistakes what resource are you using? Internal or external? What method is bei
