Used SMT Equipment | Soldering Equipment/Fluxes
Solder Wave by SEHO, in good condition. SEHO GoWave 1030 product information. Usable soldering width max. 340 mm [13.39”] Pass-through height (measured from bottom edge of PCB) 100 mm [3.94”] PCB / solder mask dimensions l x w max. 410 x 340 m
Used SMT Equipment | Soldering Equipment/Fluxes
Solder Wave by SEHO, in good condition. SEHO GoWave 1030 product information. Usable soldering width max. 340 mm [13.39”] Pass-through height (measured from bottom edge of PCB) 100 mm [3.94”] PCB / solder mask dimensions l x w max. 410 x 340 m
Used SMT Equipment | Soldering - Reflow
The SMRO-4000 Scirocco Reflow oven has been developed for reflow soldering of Hybrid boards, SMT boards and Curing Glue or thin film pastes. The machine is developed for medium to large series of assembly. The Scirocco is based on hot air convection.
Used SMT Equipment | Soldering - Reflow
The SMRO-4000 Scirocco Reflow oven has been developed for reflow soldering of Hybrid boards, SMT boards and Curing Glue or thin film pastes. The machine is developed for medium to large series of assembly. The Scirocco is based on hot air convection.
Used SMT Equipment | Soldering - Reflow
The SMRO-4000 Scirocco Reflow oven has been developed for reflow soldering of Hybrid boards, SMT boards and Curing Glue or thin film pastes. The machine is developed for medium to large series of assembly. The Scirocco is based on hot air convection.
Used SMT Equipment | Soldering - Wave
Working width: 330 mm (13") Solder module: Type: lead-free double wave solder module Solder volume: approx. 390 kg (860 lb.) LEADFREE approx. 335 kg (739 lb.) lead-free alloy Warm-up time: approx. 2.5 h Preheating length: 1,100 mm (43.3") Fl
.JPG)
Used SMT Equipment | Soldering - Reflow
Air Operation PCB Flow: Left-to-Right Edge Rail & Mesh Rail Conveyor Width: 22" Heated Length: 98" Heated Zones (Top/Bottom): 7/7 Cooling Length: 28" Cooling Zones (Top/Bottom): 1/1 Overall System Length: 170" Voltage Range: 208~480 VAC M
Used SMT Equipment | Soldering - Wave
- Machine is available at any time, - Foam fluxer, - Single wave (laminar), - 3pcs of frame included, - Working condition. - YOM - 1995. It is filled with SN100C (106 kg) and we can provide report of test on the purity of the alloy. Equipmen
Used SMT Equipment | Soldering - Reflow
Technical information: •Power requirements: 380VAC-3~ + N •Number of zones: 7(5x preheat, 1x reflow and 1x cool down) •Rated power max.: 18,2 kW •Temperature regulation accuracy: ≤1ºC •Conveyor speed: 15 to 120 cm/min. •Max. soldering temp: 30
.jpg)
Used SMT Equipment | Soldering - Reflow
Features 1. Full hot air reflow heat fast, high thermal efficiency compensation, delta t less than ± 2 ℃ soldering is uniform. 2. HELLER company has 40 years of history, process maturity. 3. maintenance costs low, the furnace normal use, electrici
