Electronics Forum | Wed Mar 27 19:54:25 EST 2002 | ianchan
So does it mean Magnetized Blocks, are not going to be a concern for magnetized machine tables? or are not going to generate electro-magnetic fields? can anyone please help unravel this pop-quiz question? (keeping in mind the support block has rathe
Electronics Forum | Thu Nov 01 14:02:57 EDT 2012 | williamaxler
I have used the Versaflow 40/50 which is the model before the 3. The machine is a very good machine, the electro magnetic pumps work well and do not cause alot of dross.
Electronics Forum | Thu Nov 01 12:58:40 EDT 2012 | bburn
My company is looking to purchase a new selective solder system. We're currently looking at the ACE KISS 205 and the ERSA Versaflow3. I am hoping to get some feedback from anyone who has worked with either of these machines or the companies themsel
Electronics Forum | Mon Feb 22 10:01:01 EST 2010 | jtsyeung
Since the inductor is electro-magnetic, that means the device is composite of coil and ferrite metal. The inductor inside the reflow oven meets with blower motors which close to the inductor and generate magnetic field. With such conditions, Lawren
Electronics Forum | Wed Mar 27 05:48:32 EST 2002 | ianchan
thanks for the opinion, dun think we want to drill the machine tables, due to SMT line config : 1) printer, 1unit machine 2) chip shooters, 3 units machine 3) IC mounter, 1 unit machine plus the potential void of machine warranty by the drilling,
Electronics Forum | Tue Feb 05 14:35:30 EST 2013 | rway
In order to test a reed switch on the Teradyne, you will need an electro-magnet mounted inside the fixture. It will need to be mounted directly under the reed. First perform the passive testing (TVSV or Cont), then the active test. Drive the coil
Electronics Forum | Wed Mar 27 01:06:12 EST 2002 | ianchan
Hi Guys, We are using two types of support Jigs for our PCB boards, during the paste printing, chip shooter, and IC mounting. The two types of support Jigs are : 1) "self-fabricated" aluminium support Blocks 2) "off shelf purchased" support Pins T
Electronics Forum | Tue Dec 03 07:57:27 EST 2002 | pjc
Price of DEK 248 and MPM UP100 are about the same, $22-36K range. MPM UP100 has programmable squeegee pressure. Precise, repeatable results with less operator involvement. Pressure parameters saved in board program file. DEK 248 has manual microm
Electronics Forum | Mon Jul 26 21:56:53 EDT 2004 | pdeuel
The camera is not driven from the motor cards. The camera is attached to what is called a forcer. For the Y axis there are two of them. One is wired backwards from the other. one of the forcers is connected to a flex chanell for the air and electrica
Electronics Forum | Thu Oct 04 00:10:15 EDT 2018 | gaintstar
flason smt wave soldering machine: http://www.flason-smt.com/product/SMT-stencil-printer-Dek-Y-Axis-Motor-133128.html http://www.flason-smt.com/product/SMT-stencil-printer-spare-parts-Dek-Camera-181054.html http://www.flason-smt.com/product/SMT-stenc
