Electronics Forum | Thu Sep 19 11:14:45 EDT 2002 | Jim M.
We had lots of problems with bridging on 15.8mm pitch, QFP17-160 at the start.The board was .032 thick, double sided-six boards to a panel. Here is the problems (not neccessarily in the biggest to little but as i remember them) and solutions that he
Electronics Forum | Tue Jan 14 11:02:59 EST 2003 | soupatech
I found a feeder with a 2mm pitch and was told that although it was made for the CP4, it would work with the CP3. Before we throw out a thousand bucks, has anyone had experience loading parts off of a 2mm pitch tape with the CP3? The part is a 1.6
Electronics Forum | Tue Jan 14 15:38:28 EST 2003 | fujispares
Hi, CP3 will have trouble placing 0603 parts - I wouldn`t use a CP3 for these parts - A CP4 will be more suitable. A older CP4 feeder will fit and function on a CP3.
Electronics Forum | Mon Jul 25 03:39:25 EDT 2016 | rob
A 200% + increase in load time certainly erases > any thoughts of efficiency in my mind. We have tried the Visker Electric feeders out (Yamaha & Juki)and they are nice and smooth, with a faster recovery rate, also adjustable pitch. However, with
Electronics Forum | Thu Jul 18 17:38:27 EDT 2019 | rgduval
Not swapping out feeders....swapping out magazines. It only works well if you have enough extra mags to load all the feeders on. And is a viable solution if your position limited on your machine. Before the advent of Aegis feeders for My machine
Electronics Forum | Sat Jun 13 00:25:59 EDT 1998 | Scott McKee
Last October I purchased a Mydata over a Phillips and Amistar. I've done things on my Mydata that is impossible on the other machines. I can build the top side and the bottom side of two boards at the same time (I print both sides at once). I can "
Electronics Forum | Tue Jan 17 10:59:43 EST 2006 | Rob
Hi Pete, Thanks for taking the time to respond. My experiences with Mydata would differ from yours, but as in life, different machines are for different circumstances. We have many low volume customers that love them - they are easy to use, upgr
Electronics Forum | Fri Jan 16 16:35:49 EST 2015 | rgduval
Evtimov, I would love to look at a more contemporary machine! Or, jobs that fit better on the machine that we have. However; a. we're a start up, and the GSM was here before I was; and b. we're a start up, in the EMS world, and sometimes, don't get
Electronics Forum | Sun Dec 19 17:45:35 EST 1999 | Bill Petlock
Clarissa, Buying used equipment should not be risky if you do your homework. As M COX said, you should find out if the manufacturer still supports the machinery but don't take everything they tell you as gospel. Remember, they want to sell you a new
Electronics Forum | Wed Jun 02 16:33:08 EDT 2004 | davem
Fuji is the best, but there are other alternatives besides Quad. If you really want to look at Fuji, take a peek at their XP142E series. With "Vision processing on the fly" and a "Mini Turret Head" with 12 placement nozzles it should fit your needs n