New Equipment | Board Handling - Conveyors
pcb multi magazine NG OK unloader is connected to the back of AOI and has horizontal movement and go-through functions,The OK and NG PCB after being tested by AOI can be separated and sent to the PCB racks, so that the PCB can be protected better.
New Equipment | Board Handling - Conveyors
automatic SMT pcb NG unloader is connected to the back of AOI and has horizontal movement and go-through functions,The OK and NG PCB after being tested by AOI can be separated and sent to the PCB racks, so that the PCB can be protected better. AS
Electronics Forum | Fri Nov 11 09:18:28 EST 2005 | chunks
EMI shields are no fun! Your process will depend on your design and condition of the shields. We always break the shields into their own process. Because the shields are never flat, screen printing paste and trying to reflow them only caused huge
Electronics Forum | Thu Aug 08 11:58:25 EDT 2013 | rway
I am not that familiar with the older systems. The software should be supported on both old and new alike unless you are limited by the operating system, but the camera will obviously have a lower resolution and perhaps the filtering is not quite as
Used SMT Equipment | X-Ray Inspection
Configuration Complete X·ray Protection Cabinet With Safety Interlocks 160 Kv Microfocus Demountable Open X-ray Tube Transmission Target (-500 Nanometer Resolution} True X-ray Intensity (Txi) Control 10 Watts Target Power Qty.6 -
Used SMT Equipment | Turnkey Lines
Functional Pre-Owned Complete SMT Assembly Line - Still Operational (Subject to prior sell, I am listing this on other venues) Up for sale is a full turnkey SMT line and all of it's accessories, of which there are a lot, fe
Industry News | 2023-07-22 11:28:46.0
If need more technical support , pls contact with us at Jenny@ksunsmt.com
Industry News | 2022-11-22 06:14:08.0
Full-auto SMT Stencil Printer is indispensable equipment in SMT production Line. It is generally composed of board mounting, solder paste, imprinting, and circuit board transfer. Widely used are Full-auto SMT Stencil Printer and semi-auto SMT Stencil Printer These two types, next, let's share with you the operating instructions of Full-auto SMT Stencil Printer.
Parts & Supplies | Pick and Place/Feeders
Spring Belt Filter for Sony E1000 E1100 machine Our company sell the Sony SMT machine spare parts long term: 471989601 SPRING RETAINER E1000 472248403 SPRING RETAINER E1100 472092111 (441951711) FLAT BELT, TABLE / UNLOAD FLAT BELT 267967601 Sp
Parts & Supplies | SMT Equipment
All the cable used for JUKI machine available Email: bunny@goodlucksmt.com Skype: bunnysmt website: www.goodlucksmt.com www.smtsupplier.com ONLINE SHOP: http://www.aliexpress.com/store/1398568 Atten: Bunny 835E7210A0 XYR
Technical Library | 2023-08-04 15:38:36.0
The MicroLeadFrame® (MLF®)/Quad Flat No-Lead (QFN) packaging solution is extremely popular in the semiconductor industry. It is used in applications ranging from consumer electronics and communications to those requiring high reliability performance, such as the automotive industry. The wide acceptance of this packaging design is primarily due to its flexible form factors, size, scalability and thermal dissipation capabilities. The adaptation and acceptance of MLF/QFN packages in automotive high reliability applications has led to the development of materials and processes that have extended its capabilities to meet the performance and quality requirements. One of process developments that is enabling the success of the MLF/QFN within the automotive industry has been the innovation of side wettable flanks that provide the capability to inspect the package lead to printed circuit board (PCB) interfaces for reliable solder joints. Traditionally, through-board X-ray was the accepted method for detecting reliable solder joints for leadless packages. However, as PBC layer counts and routing complexities have increased, this method to detect well-formed solder fillets has proven ineffective and incapable of meeting the inspection requirements. To support increased reliability and more accurate inspection of the leadless package solder joints, processes to form side-wettable flanks have been developed. These processes enable the formation of solder fillets that are detectable using state-of-the-art automated optical inspection (AOI) equipment, providing increased throughput for the surface mount technology (SMT) processes and improved quality as well.
ETA NEW Fully Auto SMT Stencil Screen Printer for LED ❙ Introduce of SMT Printer ETA ETA-4034 is a high precision automatic solder paste printer, correspond to industrial 4.0 and MES system.through a higher level of automation, ac
Good Service SMT Stencil Printer for PCB Assembly Line ❙ Introduce of SMT Printer ETA ETA-4034 is a high precision automatic solder paste printer, correspond to industrial 4.0 and MES system.through a higher level of automa
Events Calendar | Wed Jun 19 00:00:00 EDT 2019 - Sat Jun 22 00:00:00 EDT 2019 | Bangkok, Thailand
NEPCON Thailand - Assembly, Measurement and Testing Technologies for Electronics Manufacturing Expo
INSERT INTO tracking_express (userid, username, page_id, ts) VALUES ('#Quser_profile.id#', '#Quser_profile.username#', 14, (#ts#)) SMT Express, Volume 2, Issue No. 4 - from SMTnet.com Volume 2, Issue No. 4 Wednesday, April 19, 2000
The Reliability Challenges of QFN Packaging The Reliability Challenges of QFN Packaging The quad flat pack no lead or quad flat non-leaded (QFN) is one of the fastest growing package types in the electronics industry today. While the advantages
| https://www.wesource.com/feeders/flat-pack-tray-unit-for-assembleon-smt-pick-place-unit-id-10402/
Flat Pack Tray Unit for Assembleon, SMT Pick & Place Unit - ID 10402: World Equipment Source COMPANY PROFILE FINDER'S PROGRAM R1-Surplus Wesource159 CALL US
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/dage/applications/test-and-inspection?con=t&page=18
LED Materials Semiconductor SMD Shear SMT Solar X-ray Technical Papers - Bondtesting Technical Papers - Materials Testing Technical Papers - X-ray Inspection All Downloads Test Types Service
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Building A, Jiepeng Square, Fuyong
Shenzhen, China
Phone: 0755-33578694