New Equipment | Solder Materials
In August 2007, Nihon Superior started simultaneous worldwide sales of SN100C (030) “eCore,” a resin flux cored, lead-free solder product, which contains the newly developed flux that enables the product to display the distinctive features of SN100C
New Equipment | Solder Materials
WS730 is a water-based, high activity liquid flux designed to offer low-spattering and excellent wetting, even to difficult-to-solder parts. WS730 is formulated for a variety of electronic, electrical and industrial applications, including wire, cabl
Electronics Forum | Sat Jan 10 10:28:06 EST 2004 | tommy
Is it possible to have zero flux or paste spattering for all smt reflow pcbs. We are seeing around 0.4% of flux spattering and looking forward to zero defect.
Electronics Forum | Mon Jan 12 11:51:15 EST 2004 | Hussman
I don't believe you'll get an exact zero flux with no-clean pastes. Water soluable yes, but I don't see it happening with no-clean; at least not this year. As for spatter, you should be able to control this. Can you define what you call "spatter"?
Industry News | 2021-01-21 08:09:52.0
Indium Corporation announces that it is now offering CW-232,a uniquely formulated flux-cored wire that combines superior wetting speed and spread with extremely low-spatter performance.
Industry News | 2018-09-11 19:30:04.0
Nihon Superior Co.has developed a new flux-cored solder wire that greatly reduces spatter compared with conventional cored wire. The new cored-flux, (032) allows the use of a wide range of soldering iron tip temperatures with very little spatter, even with high tip temperatures.
Technical Library | 2007-09-06 11:03:33.0
EFD Inc. and Leister USA have collaborated to bust the myth that you cannot perform laser reflow with solder paste. Using Leister diode lasers, EFD has formulated solder pastes that survive the rapid reflow cycle typical of laser heating. These solder pastes reflow and wet well, without spatter, even when heating is accomplished in less than half a second. The flux core in wire solders cannot boast such flux spatter resistance in such an aggressive heating environment.
Technical Library | 2023-11-14 19:24:08.0
In PCB circuit assemblies the trend is moving to more SMD components with finer pitch connections. The majority of the assemblies still have a small amount of through hole (THT) components. Some of them can't withstand high reflow temperatures, while others are there because of their mechanical robustness. In automotive applications these THT components are also present. Many products for cars, including steering units, radio and navigation, and air compressors also use THT technology to connect board-to-board, PCB's to metal shields or housings out of plastic or even aluminium. This is not a simple 2D plain soldering technology, as it requires handling, efficient thermal heating and handling of heavy (up to 10 kg) parts. Soldering technology becomes more 3D where connections have to be made on different levels. For this technology robots using solder wire fail because of the spattering of the flux in the wires and the long cycle time. In wave soldering using pallets the wave height is limited and pin in paste reflow is only a 2D application with space limitations.
ALPHA® Telecore XL-825 lead-free cored solder wire minimizes spattering in hand soldering operations, thus reducing circuit board contamination and enhancing worker safety and comfort.
Product name: Halogen Free Lead Free Solder Wire Product code: E9650-HF961 Alloy composition: Sn/Ag3.0/Cu0.5 Diameter: 0.2mm, 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.6mm Packing: 500g/reel, 1kg/reel (10kg/box) Price: Contact us for best price Features:
.gif)
