New SMT Equipment: h washing water soluable (125)

AQUANOX® A8831 - Aqueous Spray-in-Air Stencil / Maintenance Cleaner

AQUANOX® A8831 - Aqueous Spray-in-Air Stencil / Maintenance Cleaner

New Equipment | Cleaning Agents

AQUANOX® A8831 is a mild formulation that is compatible with stencils and effectively removes all types of solder pastes (water soluble, rosin, and no-clean) from fine pitch apertures. Aquanox A8831 is a low odor cleaner than can be used in open

KYZEN Corporation

AQUANOX® A8830 - Low VOC Aqueous Stencil Cleaning Agent

AQUANOX® A8830 - Low VOC Aqueous Stencil Cleaning Agent

New Equipment | Cleaning Agents

AQUANOX® A8830 is a mild formulation that does not damage stencils and is highly effective at removing all types of solder pastes (water soluble, rosin, and no-clean) from fine pitch apertures. AQUANOX A8830 is a low odor cleaner that can be used

KYZEN Corporation

Electronics Forum: h washing water soluable (74)

Re: water soluable or no clean flux?

Electronics Forum | Mon Sep 20 09:02:34 EDT 1999 | Wolfgang Busko

Hi all, We have a little discussion here about the suitable flux for a certain process, as all of us are beginners we need your advice. We are producing VGA cards and mother boards for PC's all components to be wave soldered are TH, the S

Re: water soluable or no clean flux?

Electronics Forum | Tue Sep 21 02:51:06 EDT 1999 | Mohammed saad

Thank you all for your help. about your question Wolfgang, I am using no-clean solder paste from Kester. Mohammed Hi all, We have a little discussion here about the suitable flux for a certain process, as all of us are beginners we ne

Used SMT Equipment: h washing water soluable (5)

Electrovert Aquastorm AS100 In-line water wash

Electrovert Aquastorm AS100 In-line water wash

Used SMT Equipment | Board Cleaners

Electrovert Aquastrom 100 In-line Aqueous Cleaning System Vintage: 06/2000 Process Width: 20” Level 1 Upgrade Wash Pump: 10HP (Upgraded) Dry Blower: 2x10HP (Upgraded) Recirculating Wash Tank: 80 Gallon Sump Pump: ¾ HP, 3pH, 460 V

Assured Technical Service LLC

Aqueous Technologies SMT-800-LD Batch Wash

Aqueous Technologies SMT-800-LD Batch Wash

Used SMT Equipment | Board Cleaners

Automatic Wash + Rinse + Cleanliness Test + Dry + SPC Lead Free Ready The SMT Series Cleaning Systems include the industry's most powerful batch-format drying system.  The SMT series cleaners utilize a combination of convection and radiant heat t

Capital Equipment Exchange

Industry News: h washing water soluable (17)

ZESTRON’s Terry Price will be Presenting at SMTA International 2019

Industry News | 2019-09-11 14:35:41.0

ZESTRON is pleased to announce that Terry Price, PhD will be presenting, “pH Neutral Cleaning Agents: Technology and Performance” with Axel Vargas of Lockheed Martin at SMTA International on September 24th

ZESTRON Americas

New Bubble Washer System for Stubborn Flux Cleans Five Times Faster than Immersion Cleansing

Industry News | 2017-02-01 20:14:51.0

Seika Machinery now carries the SAWA PIBW-T100L Bubble Washer System. The system provides effective cleansing with the surface active agent-free electrolysis water and eco-friendly SAWA Pica SNW-H20 alkaline solvent.

Seika Machinery, Inc.

Parts & Supplies: h washing water soluable (2)

Electrovert Electrovert Aquastorm AS200 5HP Wash Pump

Electrovert Electrovert Aquastorm AS200 5HP Wash Pump

Parts & Supplies | Board Cleaners

Baldor Reliance JMM3212T, 5 HP, 3 PH, 208-230/460VAC, 3450 RPM Electric Motor with a Gould Pumps Model SST. Removed in working order from an Electrovert Aquastorm 200 Inline Water Wash Machine. 2-8018-228-00-0 Additional Electrovert Asuastorm 200

Assured Technical Service LLC

Global Active Wave Soldering Machine GS350P

Global Active Wave Soldering Machine GS350P

Parts & Supplies | Soldering - Wave

Overseas Agent and Distributor Wanted ! Features : Spray Fiuxer: 1) Oriental motor drives the flux spraying system. Spraying speed is adjusted according to PCB board width and moving speed to ensure even spraying all time. 2) Durable “Meiji

Xtreme Marketing LLP

Technical Library: h washing water soluable (30)

Higher Defluxing Temperature and Low Standoff Component Cleaning - A Connection?

Technical Library | 2020-11-04 17:49:45.0

OEMs and CMs designing and building electronic assemblies for high reliability applications are typically faced with a decision to clean or not to clean the assembly. If ionic residues remain on the substrate surface, potential failure mechanisms, including dendritic growth by electrochemical migration reaction and leakage current, may result. These failures have been well documented. If a decision to clean substrates is made, there are numerous cleaning process options available. For defluxing applications, the most common systems are spray-in-air, employing either batch or inline cleaning equipment and an engineered aqueous based cleaning agent. Regardless of the type of cleaning process adopted, effective cleaning of post solder residue requires chemical, thermal and mechanical energies. The chemical energy is derived from the engineered cleaning agent; the thermal energy from the increased temperature of the cleaning agent, and the mechanical energy from the pump system employed within the cleaning equipment. The pump system, which includes spray pressure, spray bar configuration and nozzle selection, is optimized for the specific process to create an efficient cleaning system. As board density has increased and component standoff heights have decreased, cleaning processes are steadily challenged. Over time, cleaning agent formulations have advanced to match new solder paste developments, spray system configurations have improved, and wash temperatures (thermal energy) have been limited to a maximum of 160ºF. In most cases, this is due to thermal limitations of the materials used to build the polymer-based cleaning equipment. Building equipment out of stainless steel is an option, but one that may be cost prohibitive. Given the maximum allowable wash temperature, difficult cleaning applications are met by increasing the wash exposure time; including reducing the conveyor speed of inline cleaners or extending wash time in batch cleaners. Although this yields effective cleaning results, process productivity may be compromised. However, high temperature resistant polymer materials, capable of withstanding a 180°F wash temperature, are now available and can be used in cleaning equipment builds. For this study, the authors explored the potential for increasing cleaning process efficiency as a result of an increase in thermal energy due to the use of higher wash temperature. The cleaning equipment selected was an inline cleaner built with high temperature resistant polymer material. For the analysis, standard substrates were used. These were populated with numerous low standoff chip cap components and soldered with both no-clean tin-lead and lead-free solder pastes. Two aqueous based cleaning agents were selected, and multiple wash temperatures and wash exposure times were evaluated. Cleanliness assessments were made through visual analysis of under-component inspection, as well as localized extraction and Ion Chromatography in accordance with current IPC standards.

ZESTRON Americas

Fluid Flow Mechanics Key To Low Standoff Cleaning

Technical Library | 2009-09-18 14:42:37.0

In recent years, various studies have been issued on cleaning under low standoff components; most however, with incomplete information. It is essential to revisit and describe the latest challenges in the market, identifying obvious gaps in available information. Such information is crucial for potential and existing users to fully address the cleanliness levels under their respective components. With the emergence of lead-free soldering and even smaller components, new challenges have arisen including cleaning in gaps of less than 1-mil.

ZESTRON Americas

Videos: h washing water soluable (2)

6000 - Automatic Stencil & Pallet Cleaner

6000 - Automatic Stencil & Pallet Cleaner

Videos

The most advanced ultrasonic stencil cleaning system! Clean solder paste, adhesives and flux residue in one machine Easy loading / unloading only 39" H Uses less chemistry Generates less wastewater Increased ultrasonic cleaning e

Smart Sonic Stencil Cleaning Systems

ErgoSonic - Automatic / Closed loop Stencil & Pallet Cleaner

ErgoSonic - Automatic / Closed loop Stencil & Pallet Cleaner

Videos

The first ergonomicly designed front-loading ultrasonic stencil cleaner The ErgoSonic Model Stencil & Pallet Cleaner is fully automatic and programmable. The operator loads the stencil into an empty chamber and selects the desired cleaning profile.

Smart Sonic Stencil Cleaning Systems

Career Center - Resumes: h washing water soluable (1)

Process Engineering/Maintenance Technician

Career Center | Fredericksburg, Virginia USA | Engineering,Maintenance,Management,Production,Quality Control

• Certified CP643 Loader Calibration – FUJI American Chicago, IL 2001. • Certified - Cookson Performance Solutions BTU - PARAGON - P150 Oven – Maintenance & Electrical Troubleshooting Charlotte, NC 2001. • Certified UNIVERSAL (GSM) Platform: Operat

Express Newsletter: h washing water soluable (505)

SMTnet Express - March 23, 2017

SMTnet Express, March 23, 2017, Subscribers: 30,333, Companies: 15,177, Users: 42,115 Water Soluble Solder Paste, Wet Behind the Ears or Wave of the Future Tony Lentz; FCT ASSEMBLY, INC. Water soluble lead-free solder paste is widely used in today

Partner Websites: h washing water soluable (22)

The Hartford Courant

| https://www.thebranfordgroup.com/dnn3/Employees/OnlineAuctionAdmin/TheHartfordCourant/tabid/1828/AuctionID/1555/Default.aspx?page=6

1/28/2021 Hartford CT Previous Item Next Item Lot Number: 872 Description: SS Rolling Table, 72" x 30"D x 36"H Category: 873 Washing Crates w/ Carts Sold at The Hartford Courant on 1/28/2021 Hartford CT Previous Item Next Item Lot Number: 873


h washing water soluable searches for Companies, Equipment, Machines, Suppliers & Information

Sm t t t t t t t t t t net
  1 2 3 4 5 6 7 8 9 10 Next