The Position Indicator Specialist, is the largest independent supplier of position indicators for the elevator industry.
New Equipment | Assembly Services
Introduction of kic2000 furnace temperature tester Processing customization: Yes Brand: US KIC Model: kic2000 Measurement range: - 50-1050 (℃) Temperature measurement resolution: 0.1 ℃ Dimension: 320 * 86 * 26 (mm) Packing number: 1 type Ame
New Equipment | Solder Paste Stencils
MPM UP2000 HiE Screen Printer Substrate treatment Minimum/maximum size 2"x 2"(50.0 mm x50.0 mm) to 20" x 16" (508 mm x 406 mm)(16 "or larger substrate requires special clamps
Electronics Forum | Mon Jul 16 15:47:52 EDT 2012 | davef
Here's what Desco says ... Humidity Indicator Card (HIC) A card on which a moisture-sensitive chemical is printed such that it will change color from blue to pink when the indicated relative humidity is exceeded. This is packed inside the moisture-se
Electronics Forum | Thu Jul 18 09:31:11 EDT 2002 | Mark S.
As part of our Efficiency Improvement Plan I have been tasked at determining the Key Production Indicators from available production data. So I thought I would ask others what they thought were 1) the top production indicators for their facilites 2)
Used SMT Equipment | Soldering Equipment/Fluxes
2008 Vitronics Soltec 6747 Selective Solder Machine Approx Dimensions: 12' x 61" x 72" Location: Jasper, IN USA Serial: _0806867501 Features: o Machine is standard equipped o Added Solder Level Control (Dial Indicator)
Used SMT Equipment | Pick and Place/Feeders
Product number: YSI- v Products in detail Object substrate: L50 W50mm ~ L330 W360mm xx (1) does When using standard components: absoluteaccuracy (including + 3 sigma) : + / - 0.05 mm/QFP Repeat accuracy (3 sigma) : + / - 0.03mm/QFP SMT capacity:
Industry News | 2013-05-21 22:12:09.0
Based on its recent analysis of the surface mount technology (SMT) reflow soldering equipment market, Frost & Sullivan recognizes Heller Industries, Inc. with the 2013 Global Frost & Sullivan Award for Market Share Leadership.
Parts & Supplies | Pick and Place/Feeders
vacuum pump level indicator
Technical Library | 2021-02-20 00:55:47.0
Customers must be able to rely on accurate humidity indication as an assurance of SMD quality and fitness for processing and use. Without it, they might accept SMDs from suppliers that have already been irreparably damaged by moisture during storage or transit. Or, they might approve for processing SMDs that have been improperly or insufficiently heat-dried. Beyond the processing questions, there are financial questions: Where did the dry pack problems originate and who--supplier, customer, shipper--is financially responsible for the damaged SMDs? In response, Clariant, the originator of the color change humidity indicator card, and a member of the JEDEC's Subcommittee 14.1, "Reliability and Test Methods for Packaged Devices," created a new "non-reversible" halogen and cobalt dichloride free humidity indicator card. This HIC combines two reversible indicators (5% and 10%) with a new non-reversible (60% RH) indicator spot. (Figure 1) The 5% and 10% reversible spots work the way similar indicators do: they change color from blue (dry), to lavender, to pink (wet) to indicate humidity exposure at the indicated levels. If humidity levels drop, they will gradually revert back to blue.
Technical Library | 2020-11-09 16:59:53.0
A customer contacted ACI Technologies regarding a high failure rate of their assemblies. They provided assemblies to be X-rayed and inspected for the purpose of identifying any process related issues such as (but not limited to) solder and assembly workmanship and evidence of damage due to moisture related problems during reflow (a.k.a. "popcorning"). Moisture damage usually appears as physical damage to the component. The first indication of moisture damage would be externally observable changes to the package in the form of bulging or fractures to the outer surface of the component, an example of which is shown in Figure 1. Internally observable indicators of moisture damage typically include fractures to the die inside the package and lifted or fractured wire bonds. These conditions would be apparent during transmissive X-ray inspection. Another symptom of moisture related damage would be inconsistent solder joint sizes that result from package deformation during the liquidus phase of the reflow process. None of these indicators of moisture related damage were present on the customer samples.
Following the most rigorous quality standards, including strict color meter testing, Clariant's humidity indicator cards and humidity indicator plugs are designed to meet standards set forth by military agencies and electronic/semiconductor compa
A Sustainable Alternative - Humitector cards are halogen-free and cobalt dichloride free. Visit https://www.clariant.com/solutions/products/2017/10/31/00/12/humitector-type-2-nonreversible-humidity-indicator-card?utm_source=CLRYouTube&utm_medium=Vi
Training Courses | | | IPC/WHMA-A-620 Specialist (CIS)
The Certified IPC/WHMA-A-620 Specialist (CIS) training focuses on cable and wire harness fabrication and installation.
Training Courses | | | IPC/WHMA-A-620 Trainer (CIT)
The Certified IPC/WHMA-A-620 Trainer (CIT) courses recognize individuals as qualified trainers in the area of cable and wire harness fabrication and installation, and prepares them to deliver Certified IPC/WHMA-A-620 Specialist (CIS) training.
Events Calendar | Wed Mar 03 00:00:00 EST 2021 - Wed Mar 03 00:00:00 EST 2021 | ,
Are Humidity Indicators Part of Your Supply Network?
Events Calendar | Tue Jul 10 00:00:00 EDT 2018 - Thu Jul 12 00:00:00 EDT 2018 | San Francisco, California USA
Semicon West
Career Center | Beaverton, Oregon USA | Engineering
Operations Engineer � Beaverton, OR 11163 Cutting edge technology! Full-time, perm opportunity with our client for an Operations Engineer located in Beaverton, Oregon. Purpose: Responsible for supporting current production activities on printed
Career Center | New Castle, Pennsylvania USA | Production
Surface Mount Tech - Printed Circuit Board (PCB) Summary: **All applicants must be familiar with: Quad 4C equipment*** Will be responsible for Surface Mount Parts and Screen Printing Other responsibilities may include: Moves controls to activate
Career Center | seoul, South Korea | Engineering
I have 4 year process engineering in Motorola and 7 years service experience in Assemblen . 2 years in Mirtec AOI as service manager .