New Equipment | Cleaning Equipment
Features: 1. A comprehensive cleaning system: the surface of the product residues of organic matter, inorganic substances for thorough and effective cleaning; 2. Automatic cleaning mode: in a clean room to complete the cleaning, rinsing, drying all
New Equipment | Cleaning Equipment
QXJ-NC32 SMT pick and place nozzle cleaning machine In the field of the semiconductor industry today, with the development of SMT, small parts into small, high-density mounting and base for reality, and future development trends will be further co
Electronics Forum | Mon Jul 16 08:42:14 EDT 2007 | realchunks
Hi Scott, Here is another thought. Check your wave solder machine visually. Does the wave flow on both sides of the nozzle? If not, you may have some dross build-up which may be causing your problem. Generally it will only happen on the very fir
Electronics Forum | Fri Jul 13 11:33:54 EDT 2007 | realchunks
Just starting and already responsible for product quality and machine adjustment? Wow, you poor bastard. Ok, I will assume this problem happens on the bottom side of the board with a thru-hole IC. The short occurs on the side that doesn't have the
Industry News | 2013-01-17 11:15:42.0
One of the “cleanest” areas on the IPC APEX EXPO® show floor will be found at the IPC/NPL Cleaning and Contamination Testing Center
Industry News | 2013-09-14 08:54:32.0
Aqueous Technologies , together with its partners from Kyzen, FCT Assembly and Nordson DAGE, will host its next Cleaning and Reliability workshop on Thursday September 19, 2013 at the Crowne Plaza Milwaukee Airport in Wisconsin.
Technical Library | 2023-04-17 21:17:59.0
The purpose of this paper is to evaluate and compare the effectiveness and sensitivity of different cleanliness verification tests for post soldered printed circuit board assemblies (PCBAs) to provide an understanding of current industry practice for ionic contamination detection limits. Design/methodology/approach – PCBAs were subjected to different flux residue cleaning dwell times and cleanliness levels were verified with resistivity of solvent extract, critical cleanliness control (C3) test, and ion chromatography analyses to provide results capable of differentiating different sensitivity levels for each test. Findings – This study provides an understanding of current industry practice for ionic contamination detection using verification tests with different detection sensitivity levels. Some of the available cleanliness monitoring systems, particularly at critical areas of circuitry that are prone to product failure and residue entrapment, may have been overlooked. Research limitations/implications – Only Sn/Pb, clean type flux residue was evaluated. Thus, the current study was not an all encompassing project that is representative of other chemistry-based flux residues. Practical implications – The paper provides a reference that can be used to determine the most suitable and effective verification test for the detection of ionic contamination on PCBAs. Originality/value – Flux residue-related problems have long existed in the industry. The findings presented in this paper give a basic understanding to PCBA manufacturers when they are trying to choose the most suitable and effective verification test for the detection of ionic contamination on their products. Hence, the negative impact of flux residue on the respective product's long-term reliability and performance can be minimized and monitored effectively.
QXJ-NC32 SMT pick and place nozzle cleaning machine In the field of the semiconductor industry today, with the development of SMT, small parts into small, high-density mounting and base for reality, and future development trends will be further co
GPD Global | https://www.gpd-global.com/co_website/pdf/doc/FLOware-Messages-Reference-Guide-22100026.pdf
. The program run program to chang the shape library, the program. Remove Board From Exit This message appears for a conveyor machine when Manual Mode is selected, a program is started, and there are boards in both the Nest and Exit stations
ASCEN Technology | https://www.ascen.ltd/Products/auto_optical_inspection/515.html
Customer Service Contact Us Search 3M Cup mask making machine N95 mask making machine 3 Ply mask making machine PRODUCTS Email:info@ascen.ltd Skype:supplier889 PCB handling machine PCB conveyor PCB loader and unloader PCB depaneling machine PCB buffer Conformal coating equipment PCB auto optical inspection Solder paste printer SMT Smart equipment
.gif)
