Hanwha Decan S2 SMT Assembly line Decan S2 SMT Assembly Line SMT PCB production Full Automatic Assembly line Speed:158000CPH Product description: Hanwha Decan S2 SMT Assembly line, Speed 158000CPH INQUIRY Hanwha Decan S2 SMT Assembly l
New Equipment | Soldering - Other
china second hand SMT Reflow Oven Name: SMT Reflow Oven Heating zones: 8 Heating method: Hot Air Usage: SMT Assembly line Product description: china second hand SMT Reflow Oven INQUIRY China second hand SMT reflow oven Intro
Electronics Forum | Tue Dec 04 13:23:05 EST 2001 | fmonette
Hi Steve, It sounds like your product will have many moisture-sensitive devices on both sides. You should be aware of the additional controls that are required to insure the reliability of these components in a double-side reflow application. The
Electronics Forum | Fri Jul 24 02:32:35 EDT 1998 | Frank J. de Klein
| Hi, | We have encountered one serious problem that heavy packages falling down during second side reflow, especially for PLCC 84. I believe it caused by temperature profile setting. | Any good suggestion would be highly appreciated! | Stoney Tsai *
Used SMT Equipment | General Purpose Test & Measurement
Stanford Research SR785 The Stanford Research SR785 Two-Channel Dynamic Signal Analyzer is a precision, full-featured signal analyzer that offers state-of-the-art performance at a price that's less than half that of competitive analyzers. Buildin
Industry News | 2003-07-03 08:59:23.0
Continues to expect second quarter 2003 revenues to meet or exceed analyst consensus revenues of $443 million and consensus earnings per share of $0.44.
Industry News | 2008-02-07 16:21:35.0
LIVERMORE, Calif.-Feb. 7, 2008-Adept Technology, Inc. (NASDAQ:ADEP) a leading provider of vision guided robotics today announced financial results for its fiscal 2008 second quarter, ended December 29, 2007.
Parts & Supplies | Component Packaging
KH5-M655A-A1X Sensor HPX-A2 AMPLIFIRE and optical fiber use for YAMAHA Smt Machine KV7-M653A-20X YAMAHA SENSOR KV7-M653A-20X YAMAHA Y SENSOR KV7-M653A-20X KV7-M653A-20X YAMAHA Y 12YME3L2E-4 SENSOR Sensor 12YME3R-R2E4 SENSOR FOR BD. JAM DE
Technical Library | 2019-12-12 02:43:44.0
Today we discuss the reason that causes temperature humidity chamber to alarm,In most cases, the equipment alarm is caused by the improper operation in the process of use, which mainly includes following reasons:that are refrigeration system, temperature system and circulating system. First, Refrigeration system 1, refrigeration compressor overpressure alarm. If the refrigerant pressure exceeds the set value, it will stop and alarm at the same time. At this time, the fault must be eliminated and then manually reset. 2, short phase power supply, phase sequence alarm. When the external power supply of the equipment is out of phase or the phase sequence is changed, it will stop and alarm at the same time. 3. The circulating cooling water is short of water to alarm. When the water pressure of the cooling circulating water system is insufficient, it will stop and alarm at the same time, and it must wait for the fault to be eliminated and reset at the same time before it could run normally. 4, refrigeration compressor overheating alarm. When the coil of the compressor is overheated and the power supply of the line is not normal, it will stop and alarm at the same time. Second, Temperature system 1, the overtemperature alarm in the chamber. The sensors in the channel and the sample area are equipped with overtemperature protection devices, and there are also overtemperature protecter on the control panel. When the temperature in the working chamber exceeds the setting value on the controller, it will stop and alarm. 2. sample overtemperature protection. When the temperature in the sample area exceeds the protection temperature set by the controller, it will stop and alarm at the same time. The overtemperature protection of the sample is divided into upper limit protection and lower limit protection, which can be set according to the demand, Third,Circulating system 1. The alarm is caused by the overheating of the circulating fan. When the coil of the fan is over-heated, the alarm will be stopped at the same time. 2. The fan over-current alarm. When the current of the fan exceeds the allowable value, the alarm is stopped at the same time, and the normal operation can only be carried out after the fault maintenance of the overcurrent is completed. This is what we talk about today,if you have more questions,let us know.
Dinghua Technology-- the leading manufacturer of BGA rework station, Automatic screw locking machine, Automatic soldering station and non-standard equipment. For more details, please just contact John, WhatsApp/Wechat:+86 1576811 4827 , Skype: si
GPD Global | https://www.gpd-global.com/co_website/pdf/doc/Side-Mount-Loader-Unloader-Guide-24000600.pdf
magazine slot is empty, the lift system moves to the next magazine slot. If all substrates have been ejected, the lift system transports the magazine on the second tray to the programmed position. The operator may exchange the empty magazine with a full one
| https://ipcapexexpo.org/exhibitors/event-rules-regulations
& Sponsorships Advertising Opportunities Sponsorship Opportunities For Attendees Home Registration Exhibitor Registration Event Rules & Regulations Please refer to the second page of the exhibit space contract for additional rules and regulations which you accepted at the time of contracting for exhibit space
