Electronics Forum | Fri May 15 22:06:10 EDT 2009 | jrr3434
I use a clinch of 5 and a length of 3 for 1/4w and thicker leg diodes probably a 7 and 5. You really just have to play with the machine it figure out what works best for your application.
Electronics Forum | Fri May 13 02:43:21 EDT 2016 | karts22
Hi, We have several fixtures for GenRad 228x tester and would like to change sensor plates as they are quite worn. The problem is that 3 fixtures have different plate sizes for the same IC, side length is 10-12mm. What would be the best size for sens
Electronics Forum | Thu Sep 25 18:37:36 EDT 2003 | adlsmt
Grind the point on a pogo pin from an in-circuit test fixture flat and push on a leg of the component till it bends, mark the deflection, then add about 30% to the length that the pin pushed in (maybe more if your using no clean and the residue adds
Electronics Forum | Sun Dec 31 10:27:39 EST 2006 | pima
Thanks Mika. I will have opportunity to check it out in New Year, because now we dont have production. So far we have beeen using vision type 11 and to be honest this type of defect, that placement of TNTA at flank side, happend very seldom. Usually
Electronics Forum | Thu Mar 11 10:31:57 EST 1999 | Justin Medernach
| NASA CommQuest | | | Photopolymerized Conducting Polymers | | Directions: | 1.Please read the information provided on this technology. You may follow the links to additional information resources below. | | 2.After evaluating the technology,
| 1 |
