New SMT Equipment: lg-481-2 and 4.5 (103)

Smt I-pulse K01 nozzle used in pick and place machine

Smt I-pulse K01 nozzle used in pick and place machine

New Equipment | Pick & Place

Smt I-pulse K01 nozzle used in pick and place machine Smt I-pulse K01 nozzle used in pick and place machine I-pulse series nozzles: 1.M1/M4 type:M001/M002/M003/M004/M005/M006/M012/M013/M017/M018/M019/M020/M021/M022/M031/M032/M033 2.M2 type:N001/N00

ZK Electronic Technology Co., Limited

Smt Hitachi nozzles sigma-G4 Sigma-G5 nozzles used in pick and place machine

Smt Hitachi nozzles sigma-G4 Sigma-G5 nozzles used in pick and place machine

New Equipment | Pick & Place

Smt Hitachi nozzles sigma-G4 Sigma-G5 nozzles used in pick and place machine Hitachi GXH-1, GXH-3 Nozzles Part Number            Description 630 128 4842 (#101)        HA01 0.7x0.4/ø0.25 (for 0603) 630 132 2322 (#111)        PV01 1.1x0.6/ø0.38 (for

ZK Electronic Technology Co., Limited

Electronics Forum: lg-481-2 and 4.5 (5)

Leaded and Lead-Free Wave Parameters

Electronics Forum | Fri May 23 18:55:20 EDT 2008 | gregoryyork

This is one of the biggest mistakes with the Lead Free process. We have all listened to the 'industry experts' and followed their advice and unfortunately got it wrong. Keep the dwell times (dependant on alloy selection) the same as Leaded so you are

80/20 Au/Sn Solder and Proper FLux Selection

Electronics Forum | Mon Jan 17 17:38:29 EST 2011 | bandjwet

All: I am reaching out to get some suggestions on the right flux to use as well as a recommended cleaning process for soldering a KOVAR RF shield using 80/20 Au/Sn solder to a ceramic hybrid. The recommended profile is 4-5 min at 280C and at least

Used SMT Equipment: lg-481-2 and 4.5 (1)

Universal Instruments GSM  Pick and Place UPGRADED

Universal Instruments GSM Pick and Place UPGRADED

Used SMT Equipment | Pick and Place/Feeders

Universal Instruments 4685A GSM Placement Machine   Very Low Cycle Counter only 5,982,473 cycles UPS 4.5.0e Software  Four Spindle C4 Head   Two FlexHead Nozzle Changers 4.0mil Upward Looking Camera on Front 3.0mil Upwa

4 Tech Electronics Inc.

Industry News: lg-481-2 and 4.5 (33)

Symposium on Counterfeit Parts and Materials Goes Virtual

Industry News | 2020-07-14 16:20:59.0

The Surface Mount Technology Association (SMTA) and the Center for Advanced Life Cycle Engineering (CALCE) today announced that its annual Symposium on Counterfeit Parts and Materials will proceed for 2020 as a completely virtual event starting August 4, 2020 and ending August 6, 2020. The decision has been made in light of the COVID-19 pandemic to ensure the health and safety of all those who attend.

Surface Mount Technology Association (SMTA)

IPC Automotive Electronics Reliability Forum Highlights Future of Automotive Electronics Design and Manufacturing

Industry News | 2018-05-15 07:26:27.0

Fueled by strong growth in electric vehicles and autonomous cars, and a dramatic increase in electronics content in conventional automobiles and trucks, automotive electronics are crucial components of engine, ignition, and transmission management; entertainment, navigation, diagnostic tools and safety systems. IPC – Association Connecting Electronics Industries has gathered thought leaders and subject matter experts from leading electronics and automotive companies to discuss the future of automotive electronics design and manufacturing at “IPC Automotive Electronics Reliability Forum,” June 4-5 in Nuremberg, Germany.

Association Connecting Electronics Industries (IPC)

Parts & Supplies: lg-481-2 and 4.5 (104)

Philips SMT PHILIPS NOZZLES used in pick and place machine

Philips SMT PHILIPS NOZZLES used in pick and place machine

Parts & Supplies | SMT Equipment

SMT PHILIPS NOZZLES for pick and place machine Part Number Description 9498 396 03149 NOZZLE CPL3 (5PC) 9498 396 03150 NOZZLE CPL4 (5PC) 5322 360 10443 Nozzle, O2 TE 5322 360 10444 Nozzle, O3 TE 9466 918 26731 SL047 NOZZLE 5322 360 10447 Nozz

KingFei SMT Tech

Philips SMT PHILIPS NOZZLES used in pick and place machine

Philips SMT PHILIPS NOZZLES used in pick and place machine

Parts & Supplies | SMT Equipment

SMT PHILIPS NOZZLES for pick and place machine Part Number Description 9498 396 03149 NOZZLE CPL3 (5PC) 9498 396 03150 NOZZLE CPL4 (5PC) 5322 360 10443 Nozzle, O2 TE 5322 360 10444 Nozzle, O3 TE 9466 918 26731 SL047 NOZZLE 5322 360 10447 Nozz

KingFei SMT Tech

Technical Library: lg-481-2 and 4.5 (2)

Effect of Morphology of Calcium Carbonate on Toughness Behavior and Thermal Stability of Epoxy-Based Composites

Technical Library | 2020-10-14 14:49:14.0

In this study, the modification of an epoxy matrix with different amounts of cube-like and rod-like CaCO3 nanoparticles was investigated. The effects of variations in the morphology of CaCO3 on the mechanical properties and thermal stability of the CaCO3/epoxy composites were studied. The rod-like CaCO3/epoxy composites (EP-rod) showed a higher degradation temperature (4.5 _C) than neat epoxy. The results showed that the mechanical properties, such as the flexural strength, flexural modulus, and fracture toughness of the epoxy composites with CaCO3 were enhanced by the addition of cube-like and rod-like CaCO3 nanoparticles. Moreover, the mechanical properties of the composites were enhanced by increasing the amount of CaCO3 added but decreased when the filler content reached 2%. The fracture toughness Kic and fracture energy release rate Gic of cube-like and rod-like CaCO3/epoxy composites (0.85/0.74 MPa m1/2 and 318.7/229.5 J m

Inha University

Handling of Highly-Moisture Sensitive Components - An Analysis of Low-Humidity Containment and Baking Schedules

Technical Library | 2022-09-12 14:07:47.0

Unique component handling issues can arise when an assembly factory uses highly-moisture sensitive surface mount devices (SMDs). This work describes how the distribution of moisture within the molded plastic body of a SMD is an important variable for survivability. JEDEC/IPC [1] moisture level rated packages classified as Levels 4-5a are shown to require additional handling constraints beyond the typical out-of-bag exposure time tracking. Nitrogen or desiccated cabinet containment is shown as a safe and effective means for long-term storage provided the effects of prior out-of-bag exposure conditions are taken into account. Moisture diffusion analyses coupled with experimental verification studies show that time in storage is as important a variable as floor-life exposure for highly-moisture sensitive devices. Improvements in floor-life survivability can be obtained by a handling procedure that includes cyclic storage in low humidity containment. SMDs that have exceeded their floor-life limits are analyzed for proper baking schedules. Optimized baking schedules can be adopted depending on a knowledge of the exposure conditions and the moisture sensitivity level of the device.

Alcatel-Lucent

Videos: lg-481-2 and 4.5 (9)

The FINEPLACER® Lambda, a modularly designed bonder, provides a full range of process capabilities and multiple bonding technologies.

The FINEPLACER® Lambda, a modularly designed bonder, provides a full range of process capabilities and multiple bonding technologies.

Videos

The FINEPLACER® Lambda, a modularly designed bonder, provides a full range of process capabilities and multiple bonding technologies. Read more: http://eu.finetech.de/micro-assembly/products/fineplacerr-lambda.html

Finetech

TI New and Original LM22674MRX-ADJ/NOPB   in Stock  ICSOP8,18+   package

TI New and Original LM22674MRX-ADJ/NOPB in Stock ICSOP8,18+ package

Videos

TI New and Original LM22674MRX-ADJ/NOPB   in Stock  ICSOP8,18+   package LM22674MRX-ADJ/NOPB   4.5V to 42V, 500mA SIMPLE SWITCHER® Buck Converter with Precision Enable MSD42SWT1G SOT323 ON 17+ LMR23625CFQDDARQ1 SOIC-8 TI 18+ DRV8701ERGER VQFN24 T

Shenzhen Fuwo Technology Co.,Ltd

Career Center - Jobs: lg-481-2 and 4.5 (1)

oil and gas positions available!!

Career Center | singapore, Singapore | Accounting/Finance,Engineering,Purchasing,Quality Control

Requirements: Degree in Mechanical Engineering in both design and construction ( Min 4-5 years of Relvant working experience) Have a good knowledge in rotating equipment such as pumps, compressors, turbines, fans, blowers etc. Familar with the requ

Energy resourcing

Career Center - Resumes: lg-481-2 and 4.5 (1)

SMT process and equipment engineer

Career Center | BANGALORE, India | Engineering,Maintenance,Production

Hi, I have 8 years experience in electronics manufacturing company. I have good knowledge in SMT process and equipment maintenance.i successfully completed more than 200 NPI's. I have good knowledge in SMT machine programming and maintenance

Express Newsletter: lg-481-2 and 4.5 (55)

Partner Websites: lg-481-2 and 4.5 (18)

FPC Pump Inteface User Guide

GPD Global | https://www.gpd-global.com/co_website/pdf/doc/FPC-Pump-Interface-User-Guide-22890001.pdf

• All Rights Reserved GPD Global© 2/7/18 FPC Pump Interface User Guide ii Safety Notices Appropriate use, warranty Any of the following that are done without the explicit and written approval of the manufacturer

GPD Global

The Branford Group - Recent Auctions

| http://www.thebranfordgroup.com/dnn3/Auctions/RecentAuctions.aspx

   [Available for Immediate Sale] Engel Coil Line Duct Manufacturing System, Model 616 UC-ii, 16 GA Capacity Bethany, CT Radienz Living (Day 2)    [Online] SOLD - Auction Closed on 12/22/2022 Leading Manufacturer of Home and Personal Care Products


lg-481-2 and 4.5 searches for Companies, Equipment, Machines, Suppliers & Information

Sm t t t t t t t t t t net
  1 2 3 4 5 6 7 8 9 10 Next
PCB Handling Machine with CE

Software for SMT placement & AOI - Free Download.
2023 Eptac IPC Certification Training Schedule

Best Reflow Oven