Electronics Forum | Tue Sep 01 12:47:37 EDT 2009 | rodrigo
Hi all, Our IPII just developed yet another issue. The PCB goes in the conveyor and when in the loader, the lifter goes up and after a few seconds I get a lifter cycle alarm error. I checked the in/out screen and when I make the lifter go up, the se
Electronics Forum | Mon Apr 03 18:55:23 EDT 2023 | previnmoore
Im having a problem with the Juki KE2080 it's telling me that there is a head lifter error.
Electronics Forum | Fri Apr 14 10:07:18 EDT 2006 | vikkaraja
Have you checked the table itself. It seen it where either a PCB lifter or adjustble rail brake is operating properly.
Electronics Forum | Mon Nov 18 11:14:57 EST 2002 | bpan
Very good machine. Dont know about Claude but sounds like he doesnt know the machine too well. Be careful if you buy it because Tyco's Parts support for the machine are terrible. For ex. Tried to buy a sensor for the lifters on our transport and they
Electronics Forum | Wed Mar 20 13:49:15 EST 2002 | cabjerk
Hi All; The following is from our Support people who worked with Fuji on the problem; Last week Luke Mittur and John Gudel were in from Fuji to address the IP3 issue outlined below. The problem ended up being that the table "up" and table "dow
Electronics Forum | Tue Oct 11 05:52:04 EDT 2005 | GS
I know this could not be an SMT thread, but in certain way it impacts the PCB/PCBAs Assemblers. Hello everybody, who could help me please to identify if this tool Mmust be or Not compliant with the WEEE and ROHS Eu Directives ? I can define
Electronics Forum | Thu Apr 13 10:05:47 EDT 2006 | daxman
Okay fellas...I posted awhile back regarding CP4 and CP6 placement issues. I think we may have figured it out. XO/YO and mark read positions were not correct. However, we have a new problem with the CP4-2. I was running the Fuji board, placing a s
| 1 |
.gif)
