Industry Directory | Manufacturer
Fast Dry Self Inking Inspection Stamps for permanent marking
The World's Best SMT Convection Reflow Ovens for Large Boards and Dual Lane 1826 Mark 5 reflow oven provides consistent performance for high volume reflow requirements while minimizing preventative maintenance and floorspace. Lead Free Certified!
The World's Best Convection Reflow Oven The ultimate high volume production reflow oven with belt speeds up to 1.4 m/min to accommodate the fastest pick and place systems. Lead Free Certified reflow oven! Maintenance Free! Lowest Nitrogen &
Electronics Forum | Fri May 22 22:13:18 EDT 2020 | gabriel1blue
Hi guys we had problems with our old pick and place machines and all the parts data and mark data was lost when we had to restart the machine. We made a copy but it has been so long that we used it that now it's not working. I hope someone has one of
Electronics Forum | Mon Sep 06 09:55:52 EDT 2004 | Joe O.B.
Hi, We're going to migrate our boards from through-hole to SMT, and I'm dealing with the PCB layout. I've found a lot of references for fiducial marks but none of them states if components can be placed beyond the marks limits or only within the are
Used SMT Equipment | Soldering - Reflow
10 Heat Zones Voltage: 380V Max PCB size: 18" Feed Direction: L-R Additional Options: EHC, Fan Speed Control
Used SMT Equipment | Soldering - Reflow
13 Heat Zones Voltage: 380V Max PCB size: 18" Feed Direction: L-R Additional Options: EHC, Dual Lane, Gen 5.2, OMS
Industry News | 2012-05-11 20:35:45.0
Heller Industries has been awarded a 2012 SMT VISION Award in the category of Soldering Reflow for its 1936 Mark 5 Reflow Oven. The award was presented on April 25, 2012 at the Nepcon China Exhibition.
Industry News | 2015-05-18 10:27:49.0
Heller Industries has been awarded a 2015 SMT China Vision Award in the category of Reflow Soldering for its 1936 Mark 5 Reflow Oven. The award was presented during April 21, 2015 ceremony at the Shanghai World Expo Exhibition & Convention Center during NEPCON China 2015.
Parts & Supplies | SMT Equipment
Panasonic BM's MARK camera Panasonic BM's MARK camera Panasonic BM series machines MARK cameras, Name: MONOCHROME CCD CAMERA, New item number; N510023803AA, Old Part Number: N940CS86-030
Parts & Supplies | SMT Equipment
Panasonic BM's MARK camera Panasonic BM's MARK camera Panasonic BM series machines MARK cameras, Name: MONOCHROME CCD CAMERA, New item number; N510023803AA, Old Part Number: N940CS86-030
Technical Library | 2023-07-22 02:26:05.0
Patch offset; Uneven patches throughout the substrate (each substrate is offset in a different way); Only part of the substrate is offset; Only certain components are offset; The patch Angle is offset; Component absorption error; Laser identification (component identification) error; Nozzle loading and unloading error; Mark (BOC mark, IC mark) identification error; Image recognition error (KE-2060 only); Analysis of the main reasons for throwing material. More information about KINGSUN please Contact US at jenny@ksunsmt.com or visit www.ksunsmt.com
Technical Library | 2019-06-17 15:09:43.0
Very often pick and place machines are programmed using CAD data. This data increases the accuracy, precision, and repeatability of its component placement objectives. CAD data makes fine pitch and small component assemblies repeatable, but cannot adjust to a particular board unless it is exactly the same size and shape of the original board used for programming. The process by which printed circuit boards (PCBs) are made only allows some minor changes inboard size and shape, but these small differences are enough for parts to be misplaced. For this reason we use fiducial marks to increase the chances of precise component alignment.
i4.0 Today caught up with Marc Peo of Heller Industries at IPC Apex Expo in San Diego, to discuss the IPC CFX initiative. Check out the rest of the CFX Videos from IPC APEX EXPO 2018 here: CFX Highlights: https://youtu.be/Q7_fWK7_zeA IPC Representati
Training Courses | | | IPC-600 Specialist (CIS)
The Certified IPC-600 Specialist (CIS) training targets quality assurance and acceptance of bare printed circuit boards.
Training Courses | | | IPC/WHMA-A-620 Specialist (CIS) Recert.
The Certified IPC/WHMA-A-620 Specialist (CIS) recertification courses are intended for those individuals who were previously certified as IPC/WHMA-A-620 Specialist.
Events Calendar | Tue Mar 30 00:00:00 EDT 2021 - Tue Mar 30 00:00:00 EDT 2021 | ,
Wisconsin Chapter Webinar: PCB Assembly – Labeling and Marking Technology and Materials
Events Calendar | Mon Aug 10 00:00:00 EDT 2020 - Mon Aug 10 00:00:00 EDT 2020 | ,
Monitoring & Bench marking Your Processes and Assembly Yields
Career Center | Atlanta, Georgia | Engineering,Technical Support
Bachelors Degree in Electronics or related field and test equipment/or application equipment bkgd. Installation, maintenance, troubleshooting & repair of Automated Test Equipment products. Coordinate with Sales department. Please email your resu
Career Center | Neptune, New Jersey USA | Engineering,Production
Position available for Production Engineer Will be responsible for defining and documenting processes and insuring quality processes are implemented in production. Creating oven profiles, machine programs (we will train), confirming Bill of Mater
Career Center | Chennai, Tamilnadu India | Engineering,Maintenance,Purchasing,Quality Control,Sales/Marketing,Technical Support
I have two year experience in debugging and SMT,THT, and BGA reworking at Avalon technology..
Career Center | Alton, Missouri USA | Sales/Marketing
20+ years experience in the southern Illinois and eastern Missouri territory. Have worked with all the manufacturers within the territory. Have sold numerious products ranging from PCBs to microprocessors.
Design Authors: Leonard Marks and James A. Cateri
SMTnet Express, March 16, 2017, Subscribers: 30,295, Companies: 15,177, Users: 42,073 Best Practices for RoHS Compliance in support of CE Marking Randy Flinders; GreenSoft Technology, Inc. In 2012, The European Directive on Reduction of Hazardous
| http://etasmt.com:9060/cc?pageID=newsList&ID=te_news,0&pNum=5
I.C.T-510A has the FAYb laser head inside the machine. By adopting a Stage moving in X and Y axes, the laser head marks on the objects
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/brand/architecture/partnerships
. Before Entering a Partnership or Alliance Before entering into any agreement to use Nordson's name and identity in conjunction with the brand and marks of another party, the following questions
