Electronics Forum | Mon Aug 18 12:01:19 EDT 2008 | cyber_wolf
Is there anyone out there using the new Mydata MY100 series machines ? We are looking into a MY100DX-12 or a MY100DX-14 machine. I am interested in all comments...good..bad... Thanks in advance.
Electronics Forum | Mon Jan 25 01:24:27 EST 2010 | sparrow
If the bumps are so small, I do not see any reason for considering Mydata, Siemens or any SMT p&p machine. Datacon's die bonders are very good ones. In your case, I would keep using them.
Electronics Forum | Mon Jan 25 01:05:43 EST 2010 | wmeliane
Thanks for feedback. We already have 2 Datacon machines as we are mostly building microelectronics modules. The FC dies are pretty small and light. Bumps are
Electronics Forum | Thu Jan 28 16:27:05 EST 2010 | Howard
9 micron placement accuracy. Includes Flipper unit, dispenser and double nozzle changer. Any interest? Howard (AIRVAC)
Electronics Forum | Mon Feb 15 21:24:11 EST 2010 | seabas
The CX-1 is a good choice. As accuarte as a die bonder, and as fast as an SMT placer. We love ours.
Electronics Forum | Wed Feb 25 12:36:18 EST 2015 | Svajunas Astrauskas
Our company have Mydata MY100DX mashine. When assembling project it lags. Assembling - several seconds thinking (sometimes till 10secons) - assembling and this problem repeats all time. When button is pushed it sometimes reacts only after 1-10 secon
Electronics Forum | Thu Jul 09 11:12:43 EDT 2015 | quaker332007
We have a mydata MY100DX and A Hover-Davis label feeder. I'm have issues picking up the label. The machine will place it fine for a few then stop and refuse to pick up the label. Is anyone using this configuration and if so do you have and points
Electronics Forum | Sun Jan 24 20:11:45 EST 2010 | wmeliane
Hi I would like to get feedback on which of the following 2 machines to buy: -option 1: My100 with single Midas head -option 2: D1S with single P&P head I have experience with the Siemens D series. However I have no real experience with Mydata... Is
Electronics Forum | Wed Jan 27 22:39:46 EST 2010 | wmeliane
Thanks for the recommendations. We have settled on the new Juki CX-1. Juki states that the machine is a hybrid between a MCM placer and an SMT placer. This machine, if it is capable to do what Juki says it can do, is exactly the machine we need. Ma
Electronics Forum | Mon Jan 25 00:56:38 EST 2010 | sparrow
Hello, Mydata p&p machines are built for high mixed and low/mid volume production, so if you talk about very low volume - no doubt, mydata is what you can use. You can consider 2 models for your application - MY100SX or MY100LX, depending on the min
