Electronics Forum | Sat Jan 29 04:59:02 EST 2005 | Grant
Hi, MYDATA's are ok for lower volume, and they are very flexible. If you only have 1 or 2 trays of components and are on a tight budget, then you can even place the trays on the Y wagon behind the PCB so you can get away without the tray wagon. Al
Electronics Forum | Mon Feb 21 16:06:10 EST 2005 | MR
I agree w/ JB; the package height definition is crucial. I have had problems w/ this in the past, and found that a resistor height was being used as a universal passive height for the capacitor in question. Properly defining the height fixed the pro
Electronics Forum | Tue Apr 29 20:26:03 EDT 2008 | sys_steven
You can adjust to 45mm clearance, But I would recommend staying at 25mm if working with fine pitch and smaller passive components.
Electronics Forum | Thu Jan 13 03:38:18 EST 2005 | Base
Hi Grant, You say your design are increasingly using more passives. Do you mean you're using more and more components per board or is it only the ratio passives/IC's that is shifting? And are you also increasing volume or is it just the component-co
Electronics Forum | Mon Jan 02 09:39:34 EST 2017 | dyoungquist
I do not know the limit for component height on Hydra.
Electronics Forum | Thu Jan 13 07:29:49 EST 2005 | Grant
Hi, It's both really, and we are doing higher volume of current products, but new products are increasing in component count, mostly passives. We have analog on our products, and this uses a lot of passives, plus each semiconductor needs decoupling
Electronics Forum | Tue Sep 21 20:58:11 EDT 2021 | avolovich
Your Mydata should have come with a myriad of preprogrammed packages, specifying height (ex. 0805-05, 0805 components with height of 0.5mm).
Electronics Forum | Fri Nov 07 18:12:50 EST 2014 | cot628
This issue is coming from a customer. The customer demands that we do not mechanically center or test passive components, because of issues they had in the past. There has been a studies that it takes about 8-10 newtons to damage chip. Most of our pa
Electronics Forum | Tue Jul 07 15:47:22 EDT 1998 | Joe Herz
| Any Comment's about mydata placment reliability (repeatablity) on all types of components. | we have trouble quantifying just how good it is. | Is it as good as Mydata Claim ?? | Please help We have 4 Mydatas running at this time. Non vision par
Electronics Forum | Tue Jul 07 15:51:08 EDT 1998 | Joe Herz
| | Any Comment's about mydata placment reliability (repeatablity) on all types of components. | | we have trouble quantifying just how good it is. | | Is it as good as Mydata Claim ?? | | Please help | We have 4 Mydatas running at this time. | No
.gif)
