Electronics Forum | Fri Jan 21 00:58:21 EST 2005 | Shito
Hi Hannu we are using the same machine and try different needles and the best one we come out and we still using it strong are the needles from EDF , check them out at http://www.efd-inc.com/ , you can ask for some samples . Shito
Electronics Forum | Thu Jan 20 02:35:23 EST 2005 | Hannu
Hi guys Does anybody know of any second source for Camalot XyFlexPro needles, apart from Speedline? We have had problems with footed needles with the foot coming off as the glue that is supposed to hold it in place gets broken. Also it would be inte
Electronics Forum | Thu Jan 20 08:27:27 EST 2005 | John S
We us DL Technology on our 3800. I guess they can ship to Europe. They are less expensive and work better. They have a website; it should be easy to find. John S
Electronics Forum | Thu Jan 20 08:50:28 EST 2005 | davef
Try: * Count On Tools 800.538-0426 sales@cotinc.com http://www.cotinc.com * Nozzle Supply Co. 205-266-8770 Fax 256-378-0629 http://www.nozzlesupply.com
Electronics Forum | Fri Oct 06 09:03:07 EDT 2006 | RLM
Is anyone familiar with the automatic needle calibrator #820-10 for a Camalot 1818. It looks like a simple device but when I follow the instructions to create the calibration program all I get is the needle crashing down onto the calibration button.
Electronics Forum | Wed Feb 09 11:50:55 EST 2005 | mrduckmann2000
Pete, I started with the App engineers, they had me try a 21g needle then a 23g needle then a 25g needle. The tech's are the ones suggesting that I slow the pump down to half speed and try a 27g needle. The needles are $150 a piece.....I now have
Electronics Forum | Tue Mar 07 21:57:54 EST 2017 | ttheis
It was indeed the fact that the height sensor needle was moved away from the dispense needle. Happened to find a height probe rod with longer reach in the spare parts shipped with the machine; with the height sense probe next to the needle the machin
Electronics Forum | Mon Jan 24 04:26:32 EST 2005 | Hannu
Morning all, Has anybody done any pin in paste job with a dispenser? I read somewhere that the needle i.d. should be slightly larger than the hole diameter, but with holes of 1.4 mm I would have to work with a very large needle indeed. How does past
Electronics Forum | Fri Jul 30 17:17:08 EDT 2004 | cvega
GPD Global provides a line of system to for small volume solder paste and condutive adhesive dispensing know as the MicroMax. Our systems have an accuracy of 0.001" at the needle tip, capability of two valve mountings, integrated closed loop needle
Electronics Forum | Wed Dec 10 07:47:16 EST 2008 | benefon
If you find the correct type of adhesive/needle size then dispensing certainly is no problem. With a footed needle a very repeatable process too. Much more flexible than stencil printing and no need to mess around with stencil cleaning. But with auge
