High Tech, Quick Turn, Manufacturer of PCB's up to 44 layer count. Specializing in Prototype and R&D. Mil-Spec 31032 & 55110 Certified. Located in Fremont, CA & Amesbury, MA.
Industry Directory | Manufacturer
Asia Pacific Circuits is one of Asia's leading Electronic Manufacturing Services companies, committed to providing high quality PCB and PCBA Contract Electronics Manufacturing Services.
Bicheng provides RD, high-tech, IT research companies and organizations, large or small with high quality bare PCB's PCB Products & Services * FR-4, High TG170, High CTI 600V * MCPCB, 1W/mk- 3W/mk * High speed
.jpg)
Layer Count: 8L Board Thickness: 1.0mm Panel Dimension:190*86mm/2up Material: S1141 Copper on board surface: 35μm Min Hole Diameter: 0.1mm Min line Width/Space: 8/8mil Surface Finish: ENIG+Selective OSP in BGA area This quick turn PCB is manufacture
Electronics Forum | Wed Jul 08 16:28:25 EDT 2020 | duchoang
OSP board finish is the issue. With OSP microBGA board, we need to have enough paste (enough flux) on pads (small pads on BGA), also we need to have strong, more activate flux to get rid of Preservative layer on top of pads. In this case, the OSP did
Electronics Forum | Fri Aug 11 14:50:35 EDT 2000 | Doug Philbrick
Any Motorlla Guru's out ther know, or can say, if Mot is mandating a change away from Gold / Nickel and going to OSP where BGA are involved?
Industry News | 2011-04-20 21:19:17.0
IPC – Association Connecting Electronics Industries® has announced the winners of this year's Best U.S. and International Papers at IPC APEX EXPO™, held April 12–14, 2011, in Las Vegas. The event's Technical Program Committee selected the winners through a ballot process.
Industry News | 2018-06-03 19:11:33.0
SHENMAO America, Inc. is exhibiting at the 2018 IEEE 68th Electronic Components and Technology Conference (ECTC), taking place May 29 - June 1, 2018 at the Sheraton San Diego Hotel & Marina. SHENMAO plans to showcase its new PF906-S and PF912-S solder alloys, and SMF-WC53 Water-Soluble / Cu-OSP Pad Ball Attach Flux.
Technical Library | 2008-04-08 17:42:27.0
Concern about the failure of lead-free BGA packages when portable devices such as cell phones are accidentally dropped and a general concern about the resistance of these packages under shock loading has prompted an interest in the impact strength of the soldered BGA connection. This paper reports the results of the measurement of the impact strength of lead-free 0.5±0.01mm diameter BGA spheres on 0.42mm solder mask defined pads on copper/OSP and ENIG substrates using recently developed equipment that can load individual BGA spheres at high strain rates in shear and tension.
Technical Library | 2020-10-27 02:07:31.0
For companies that choose to take the Pb-free exemption under the European Union's RoHS Directive and continue to manufacture tin-lead (Sn-Pb) electronic products, there is a growing concern about the lack of Sn-Pb ball grid array (BGA) components. Many companies are compelled to use the Pb-free Sn-Ag-Cu (SAC) BGA components in a Sn-Pb process, for which the assembly process and solder joint reliability have not yet been fully characterized. A careful experimental investigation was undertaken to evaluate the reliability of solder joints of SAC BGA components formed using Sn-Pb solder paste. This evaluation specifically looked at the impact of package size, solder ball volume, printed circuit board (PCB) surface finish, time above liquidus and peak temperature on reliability. Four different BGA package sizes (ranging from 8 to 45 mm2) were selected with ball-to-ball pitch size ranging from 0.5mm to 1.27mm. Two different PCB finishes were used: electroless nickel immersion gold (ENIG) and organic solderability preservative (OSP) on copper. Four different profiles were developed with the maximum peak temperatures of 210oC and 215oC and time above liquidus ranging from 60 to 120 seconds using Sn-Pb paste. One profile was generated for a lead-free control. A total of 60 boards were assembled. Some of the boards were subjected to an as assembled analysis while others were subjected to an accelerated thermal cycling (ATC) test in the temperature range of -40oC to 125oC for a maximum of 3500 cycles in accordance with IPC 9701A standard. Weibull plots were created and failure analysis performed. Analysis of as-assembled solder joints revealed that for a time above liquidus of 120 seconds and below, the degree of mixing between the BGA SAC ball alloy and the Sn-Pb solder paste was less than 100 percent for packages with a ball pitch of 0.8mm or greater. Depending on package size, the peak reflow temperature was observed to have a significant impact on the solder joint microstructural homogeneity. The influence of reflow process parameters on solder joint reliability was clearly manifested in the Weibull plots. This paper provides a discussion of the impact of various profiles' characteristics on the extent of mixing between SAC and Sn-Pb solder alloys and the associated thermal cyclic fatigue performance.
Career Center | Rochester, New York USA | Engineering
I have done my undergraduate studies in Mechanical Engineering. I am pursuing my Master's Program in Electronics Packaging. I am currently working as a Research Assistant for RIT-CEMA (Center for Electronics Manufacturing and Assembly). My research
Career Center | Phoenix, Arizona | Engineering,Management,Production,Quality Control,Research and Development,Sales/Marketing,Technical Support
• Highly motivated, solution oriented professional with proven record synergizing scientific, engineering, and business administration backgrounds to drive and sustain customer satisfaction and long term improvements. • Articulate communicator that a
Imagineering, Inc. | https://www.pcbnet.com/capabilities/assembly/technology-roadmap/
. Layer Count 50 Max. Working Panel Size 21" x 31" Max. Board Thickness .300" Min. Board Thickness 0.16"(6L) Min. Line/Space • I/L - 2 / 1.5mil (HDI) • O/L - 2 / 1.5 mil (HDI) Warpage .001" / sq. in. BGA Pitch 0.20mm Layer to Layer Registration 3 mil
