YAMAHA Refurbished YG100 Chip Mounter SMT Pick and Place Machine YAMAHA YG100 high-speed placement chip, high-precision, high-speed modular placement machine,high rigidity dual drive structure,High-performance servo system, high-resolution digital m
Refurbished NXT-III 2xM3III (2 x H24S Head) FUJI SMT Pick and Place Machine Specification of FUJI AIMEX III SMT SMD Pick and Place Machine MC Model M3 III M6 III Applicable PCB size (LxW) 48 x 48 mm to 250 x 510 mm (dou
Electronics Forum | Sat Jun 07 09:05:58 EDT 2003 | Mike
We have opened a site for people to post parts, request parts, etc. It is the Global Parts Repository. It is mainly electronic and mechanical parts that we have in mind: http://www.info-services.net/gpr
Electronics Forum | Sun Sep 21 19:23:25 EDT 2003 | Mike
The GPR is growing. Visit and submit parts or requests for parts. http://www.info-services.net/gpr To see all of the parts, visit http://www.info-services.net/gpr/allparts.html
Used SMT Equipment | Pick and Place/Feeders
Model YAMAHA YT-16 Pick and Place MachinePCB dimensions L330×W250mm(Max) to L50×W30mm(Min)Mounting accuracy When using Yamaha's standard components Absolute accuracy (µ + 3σ) : +/-0.05mm/CHIP, +/-0.05mm/QFPRepeatability (3σ) : +/-0.03mm/CHIP, +/-0.03
Used SMT Equipment | Board Cleaners
Speedline Technologies AquaJet Stencil Batch Cleaner and Resys ClosedLoop System For Sale The wash needs a control board. (Part Description: BL1700 CNTRL 16IN 16OUT) The Part Number to Purchase this board is 20-101-0214. Estimated cost is $349. We h
Industry News | 2017-10-02 13:58:42.0
GPD Global will exhibit at the upcoming IMAPS 2017. At booth 244, GPD Global will exhibit a complete line of Fluid Dispensing pumps with the latest dispense technologies for integration or retrofit. Whether your process requires low or high viscosity fluids, thick pastes, or abrasive media, there is a dispense pump to meet your requirements.
Industry News | 2016-11-07 16:28:47.0
GPD Global expands the performance of its automated dispense systems to run fundamental Pick & Place operations.
Parts & Supplies | Screen Printers
Description: DEK motor scraper down FRONT / REAR SQY STEPPER MOTOR LOOM BOM Part NO.: 155804/155806 Applicable models: Applicable models: GS / GSX / LT / ELA / HORIZON/ELAI/HOZ-02I jenny@ksunsmt.com
Technical Library | 2023-07-22 02:26:05.0
Patch offset; Uneven patches throughout the substrate (each substrate is offset in a different way); Only part of the substrate is offset; Only certain components are offset; The patch Angle is offset; Component absorption error; Laser identification (component identification) error; Nozzle loading and unloading error; Mark (BOC mark, IC mark) identification error; Image recognition error (KE-2060 only); Analysis of the main reasons for throwing material. More information about KINGSUN please Contact US at jenny@ksunsmt.com or visit www.ksunsmt.com
Technical Library | 2019-06-21 10:39:15.0
Recently, an ACI Technologies (ACI) customer called to discuss failures that they had observed with some through-hole capacitor parts. The components were experiencing failures following vibration and accelerated stress testing. Upon receipt of the samples, ACI performed three levels of inspection and Energy Dispersive Spectroscopy (EDS) testing to investigate the root cause of the failures. These analyses enabled ACI to verify the elements comprising the solder joints and make the following recommendations in order to prevent future occurrences. The first inspection was to investigate the capacitor leads using optical microscopy, and no anomalies were found that could indicate bad parts from the vendor or improper handling prior to assembly. However, vertical fill in the barrel of the plated through-holes was too close to the IPC-A-610 minimum specification of 75% to determine a pass/fail condition, and therefore required further investigation.
http://www.gpd-global.com GPD Global expands the performance of its automated dispense systems to run fundamental Pick & Place operations. The same automated fluid dispensing machine is capable of dispensing fluids and also Pick & Place simple compo
www.unisoft-cim.com/cells.html - CELLS WORKFLOW is affordable, simple to setup & use yet powerful product & job tracking software for fast New Product Introduction (NPI). The CELLS WORKFLOW software provides total traceability in manufacturing floor
Training Courses | | | PCB Design Courses
The PCB design courses teach students the process, techniques and tools needed to design layout of printed circuit boards.
Training Courses | ONLINE | | PCB Design Courses
The PCB design courses teach students the process, techniques and tools needed to design layout of printed circuit boards.
Events Calendar | Tue Jun 26 00:00:00 EDT 2018 - Thu Jun 28 00:00:00 EDT 2018 | College Park, Maryland USA
Symposium on Counterfeit Parts and Materials
Events Calendar | Tue Jun 23 00:00:00 EDT 2020 - Thu Jun 25 00:00:00 EDT 2020 | College Park, Maryland USA
Symposium on Counterfeit Parts and Materials
Career Center | Chino, California USA | Technical Support
The role of the Field Service/applications engineer is to provide professional service and support for Scienscope customers by performing field service installation, startup, repairs and maintenance of x-ray equipment. Typical duties will include b
Career Center | Oldsmar, Florida USA | Maintenance,Production
Job Description: • Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on Sub-assemblies which includes installing cables and circuit card assemblies. • Ability to work from diagrams and drawings, ma
SMTnet Express, February 20, 2014, Subscribers: 26526, Members: Companies: 13586, Users: 35764 Screening for Counterfeit Electronic Parts Bhanu Sood, Diganta Das; Center for Advanced Life Cycle Engineering (CALCE) Counterfeit electronic parts have
SMT Express, Issue No. 3 - from SMTnet.com Volume 1, Issue No. 3 Wednesday, August 18, 1999 Featured Article Return to Previous Page BGA REWORK Earl Moon Proof Of Design (POD) PART INSPECTION BEFORE OPERATIONS Always inspect part
| https://www.wesource.com/test-and-measurement-equipment/lakeshore-330-autotuning-temperature-controller-id-000936-5/22/
: 858.693.1991 Home About Us Contact Us Categories AOI Assembleon Machines Assembleon Parts Batch Ovens and Chambers Component Counters/Tapers Component Placers (Pick
KingFei SMT Tech | http://www.smtspare-parts.com/sale-8535994-smt-pick-and-place-machine-ai-spare-parts-fuji-cp6-cp7-cp8-holder-awph3115.html
SMT Pick And Place Machine AI Spare Parts FUJI CP6 CP7 CP8 Holder AWPH3115 Leave a Message We will call you back soon! Your message must be between 20-3,000 characters