Pcb board separator v cut pcb aluminium separator features: 1.Decrease the stress , invoide the welding pot break. 2.Adjust the up guide slip by manual, which can solve the V cut depth different problem. 3. There is the guide for V groove, whi
Fully Automatic 2 Axis PCB Cutting Machine HML-850 Feature ▶The machine can also meet the needs of horizontal and vertical cutting PCB. In another words, It can cut PCB in X axis and Y axis step by step, output the final PCB board. ▶The machine is e
Electronics Forum | Wed Jan 30 17:38:32 EST 2019 | bobpan
try at 2 good luck
Electronics Forum | Sat Jan 26 15:47:10 EST 2019 | dfl
I'm with an annoying problem with an IV-c. Almost all the time the Y-axis "stuck" when the machine is homing. The motor tries to move the axis but only make a sound. If I move the axis by hand it can complete the homing and then goes to the IDLE. So
Used SMT Equipment | Pick and Place/Feeders
Production ready with full feeder load. Installation and training no problem.
Used SMT Equipment | Pick and Place/Feeders
Modern high performance Manncorp / Autotronik pick and place machine with 60 electronic smart feeders. The current model is the MA392v1 or BA392v1 and both have a base price of around 70,000.00. It is my understanding that this machine has all the sa
Industry News | 2020-05-18 13:26:01.0
MIRTEC is pleased to announce that Integrated Test Corporation, a leading fabricator of ATE probe and final test PCBs, has selected MIRTEC as their 3D AOI partner with the purchase of an MV-7U OMNI Large Format PCB 3D AOI Machine.
Industry News | 2003-06-12 08:24:37.0
An adaptive tool prevents small and/or light components "lifting" or "floating" on printed circuit board assemblies during the wave solder process.
_1.JPG)
Parts & Supplies | Screen Printers
DEK belt 122022 ESD Black PU round belt with rough surface DEK BELT: DEK BELT TIMING 119176 DEK BELT TIMING G1237 DEK BELT TIMING G1212 DEK BELT TIMING G1296 DEK BELT TIMING G1140 DEK BELT TIMING G4915 DEK BELT 2mm x 816
Parts & Supplies | Pick and Place/Feeders
5322 290 60799 AIR SUPPLY COUPLING 265.89 Service Parts - New 5322 290 60838 SET-UP AUX CONTACT 340.96 Service Parts - New 5322 290 81508 CONTACT ELEMENT 105.27 Service Parts - New 5322 310 10689 FILTER, B
Technical Library | 2019-06-19 11:06:46.0
Tin (Sn) metal displays the characteristic of growing “tin whiskers” from pure tin coatings (most actively on relatively thin, electrodeposited or immersion tin coatings), usually months or years from the initial deposition of the tin. Tin whiskers are electrically conductive, filamentary, single crystals of white (beta phase) tin. These filaments of single crystal tin are usually one to five microns in diameter, and a few microns up to several tens of millimeters long, that grow spontaneously from the tin coatings. Alloying additions of several percent (by weight) of lead (Pb) prevents these electrically conductive tin whiskers from growing. Pb alloyed into the Sn was discovered to prevent the occurrence of tin whiskers in electronic assemblies in the 1950s as the Bell Laboratories solution to the problem of tin whiskers. The alloying of the tin with lead has thus quietly averted incalculable losses from short circuits in electronic equipment for the last 60 years.
Technical Library | 2017-01-23 21:12:01.0
"Water is not a problem of the future, but a key issue of our time for businesses: In the future, urgent water risks will increase in many areas of the world. A growing population, a changing consumer behavior and climate change will have an immediate impact on the availability and quality of water and thus build further pressure on governments, businesses and societies." (Quote from the summary of the 2014 WWF study "The imported risk. Germany's water risk in the age of globalization.")
Precise coating discrete dots with the DispenseJet DJ-9500. http://www.nordsonasymtek.com
High speed PCBA selective conformal coating machine Conformal coating machine CY-450T 1.High performance IPC +servo motor+ball screw driver, accuracy can reach 0.02mm. 2.Standerd 3 rubber valves, can be tilted 35 degrees, 360 degree rotation, ful
Career Center | , India | Engineering,Production,Quality Control,Research and Development,Sales/Marketing,Technical Support
I am working as lab chemist and also involved in troubleshooting and process control of various processes in pcb industry
Career Center | cabuyao, Philippines | Engineering
I had 9 years working as a technician starting in Smart electronic)as Mainline Technician. SGIC(Sanritsu Great International Corporation) as SMT mainline Techinician and IMI (Integrated Micro-Electronics INC,)as SMT Process Technician.
| https://www.feedersupplier.com/sale-13926852-asm-siemens-siplace-y-axis-belt-00337389-smt-machine-belt-toothed-belt-y-axis.html
ASM SIEMENS SIPLACE Y-axis Belt 00337389 SMT Machine Belt Toothed Belt Y-AXIS Leave a Message We will call you back soon! Your message must be between 20-3,000 characters
KingFei SMT Tech | https://www.smtspare-parts.com/sale-10692342-40000727-y-motor-assy-juki-ke2050-y-axis-motor-ts4616n1020e200.html
40000727 Y Motor Assy JUKI KE2050 Y Axis Motor TS4616N1020E200 Leave a Message We will call you back soon! Your message must be between 20-3,000 characters
