Pcb board separator v cut pcb aluminium separator features: 1.Decrease the stress , invoide the welding pot break. 2.Adjust the up guide slip by manual, which can solve the V cut depth different problem. 3. There is the guide for V groove, whi
New Equipment | Board Handling - Pallets,Carriers,Fixtures
CY-206 knife type splitting machine adopts straight knife design under the upper round knife. When the cutting board is cut, the v-cut is placed on the lower straight knife, the circuit board does not move, the upper circular knife moves the cutting
Electronics Forum | Sun Jan 24 08:48:43 EST 2021 | dilogic
GSM's have MMIT I/O bus. It is used for most of the discrete I/O, so I would check it's operation first - see attached diagram. You sholud have BUSPROBE tool which you can use to read/write memory locations directly. I do not know if you have access
Electronics Forum | Mon Nov 09 06:28:03 EST 2015 | recard
Hi guys, we have a problem and I hope something can give nme some new information. We have big solderability problems with a gold plated board. We changed the paste already, but there is no improvement. Could the Vapor phase Technology cause the p
Used SMT Equipment | Pick and Place/Feeders
Production ready with full feeder load. Installation and training no problem.
Industry News | 2020-05-18 13:26:01.0
MIRTEC is pleased to announce that Integrated Test Corporation, a leading fabricator of ATE probe and final test PCBs, has selected MIRTEC as their 3D AOI partner with the purchase of an MV-7U OMNI Large Format PCB 3D AOI Machine.
Industry News | 2020-09-17 12:23:10.0
Talk to the experts and see demonstrations of the latest equipment for test and inspection, fluid dispensing, and plasma treatment in one booth, #I2716
Parts & Supplies | Pick and Place/Feeders
Detailed Product Description N610117446AF CM402/CM602 original new 4mm double SMT Feeder with sensor We provide CM602/CM402/NPM Feede, 4mm- 108mm , both have, Manufacture year: 2015 , 2014 , This kide of feeder is the smallest , special feeder, p
Parts & Supplies | Pick and Place/Feeders
SMT Fuji NXT 8mm with reel holder (UF01300) feeder used in pick and place machine FUJI NXT Feeder models: Part number Description KT08C 325898 FUJI NXT feeder 8MM generation I KT8BE 041970 FUJI NXT feeder 8MM generation II KT12A 002843 FUJI NXT
Technical Library | 2019-06-19 11:06:46.0
Tin (Sn) metal displays the characteristic of growing “tin whiskers” from pure tin coatings (most actively on relatively thin, electrodeposited or immersion tin coatings), usually months or years from the initial deposition of the tin. Tin whiskers are electrically conductive, filamentary, single crystals of white (beta phase) tin. These filaments of single crystal tin are usually one to five microns in diameter, and a few microns up to several tens of millimeters long, that grow spontaneously from the tin coatings. Alloying additions of several percent (by weight) of lead (Pb) prevents these electrically conductive tin whiskers from growing. Pb alloyed into the Sn was discovered to prevent the occurrence of tin whiskers in electronic assemblies in the 1950s as the Bell Laboratories solution to the problem of tin whiskers. The alloying of the tin with lead has thus quietly averted incalculable losses from short circuits in electronic equipment for the last 60 years.
Technical Library | 2017-01-23 21:12:01.0
"Water is not a problem of the future, but a key issue of our time for businesses: In the future, urgent water risks will increase in many areas of the world. A growing population, a changing consumer behavior and climate change will have an immediate impact on the availability and quality of water and thus build further pressure on governments, businesses and societies." (Quote from the summary of the 2014 WWF study "The imported risk. Germany's water risk in the age of globalization.")
CY-206 knife type splitting machine adopts straight knife design under the upper round knife. When the cutting board is cut, the v-cut is placed on the lower straight knife, the circuit board does not move, the upper circular knife moves the cutting
Precise coating discrete dots with the DispenseJet DJ-9500. http://www.nordsonasymtek.com
Career Center | , India | Engineering,Production,Quality Control,Research and Development,Sales/Marketing,Technical Support
I am working as lab chemist and also involved in troubleshooting and process control of various processes in pcb industry
Career Center | Melbourne, Florida USA | Management,Production,Quality Control
Technical Skills/Abilities: � Management � Quality Assurance � Strong Troubleshooting Skills � Strategic Planning � Employee Training � Quality Assurance � Problem Resolution � Mechanical/Technical Aptitude
| https://www.eptac.com/soldertips/problems-with-stress-cracks-in-ceramic-components/
SolderTips: Problems With Stress Cracks in Ceramic Components | EPTAC Skip to content Scroll Toll Free: 800.643.7822 Toggle navigation Training All Classes
Heller Industries Inc. | https://hellerindustries.com/parts/6160k/
): Call Heller's Service Department: +1-973-377-6800 Ext 5 FIBERGLASS ROPE TADPLE STYLE (METER) E-Mail Us: Fields with * are required. Don't forget to learn about our new reflow oven