Electronics Forum: quad iv-c (Page 1 of 6)

Quad IV C

Electronics Forum | Thu Mar 03 09:45:27 EST 2011 | vinceprice

Quad IV C problem. Our machine is not placing parts. We can test each component one by one and the machine picks and places the parts correctly. When we run the machine for production it does not pick up the parts. Any ideas?

Quad IV-c autoprogram

Electronics Forum | Fri Oct 05 07:22:28 EDT 2018 | dfl

Hi, I just got a Quad IV-c and I'm learning to use it, I got manuals and it is up and running on DOS with windows 3.1 but I noticed that it the Autoprogram is missing, Does anybody has a copy that can share. Regards

Quad IV-c with really dark camera

Electronics Forum | Tue Oct 09 11:17:24 EDT 2018 | dfl

Ok, I will try and post the result. thanks for the help!

Quad IV-c with Y-axis problem

Electronics Forum | Wed Jan 30 17:38:32 EST 2019 | bobpan

try at 2 good luck

Quad IV-c with really dark camera

Electronics Forum | Tue Oct 09 05:38:29 EDT 2018 | dfl

Hi, my Quad IV-c is showing a really dark image on the camera and its VERY difficult to see the components pads to make the adjusts. I already check the monitor brightness (at maximum and I can see the crosshair, so the monitor is good) and already

Quad IV-c power transformer

Electronics Forum | Fri Jan 25 08:54:33 EST 2019 | dfl

For the first time, I'm really looking at to the power transformer for the IV-C pick and place (the big big one, at the middle). As I understood, is this transformer converting the 220V to 127V? I realize that the camera monitor is 127V and the PC PS

Quad IV C/115 documentation

Electronics Forum | Tue Jun 18 15:33:22 EDT 2013 | abrown615

Hey everyone, Our company just picked up a Quad IV C/115 pick-&-place system from one of our offices that closed, but we do not have the documentation for it. It looks to be a very old system so I can't find it anywhere online and we just don't know

How Quad Align works? (Quad IV-c machine)

Electronics Forum | Fri Aug 02 16:02:28 EDT 2019 | slthomas

I can't answer your question as it's been way too long since I did any Quad IVc work, but at some point bobpan will probably reply and give you exactly what you need.

Quad IV-c autoprogram

Electronics Forum | Fri Oct 05 09:04:27 EDT 2018 | dleeper

Check with: http://www.goppm.com They are a good resource to have if you are supporting a Quad machine. Insert standard "I receive no benefit nor compensation from the aforementioned company"

Quad IV-c feeder error

Electronics Forum | Sat Feb 02 04:48:30 EST 2019 | dfl

yes it's moving at the wrong pitch, about 3 components a time. Is the programming you talking about at the microcontroller AT85C55 or that serial memory 24C04? Or there is some procedure on the Quad to adjust this?

  1 2 3 4 5 6 Next

quad iv-c searches for Companies, Equipment, Machines, Suppliers & Information