Electronics Forum | Fri Jan 03 19:17:12 EST 2003 | Mike Konrad
Hi Richard My experience with R.O.S.E. testers has been positive with regard to detecting ionic contamination (even exceptionally low levels). As previously mentioned, a good R.O.S.E tester will be able to detect minuet levels of ionic contaminatio
Electronics Forum | Thu Apr 18 17:29:00 EDT 2002 | dason_c
The industrial standard is follow the R.O.S.E test as a guideline per J-STD-001 and the limit is 10ug/sq. inch. Different tester with different equivalent factor with the ROSE and you can refer back to the manual, the Zero Ion tester with equivalent
Electronics Forum | Fri Mar 26 12:26:31 EST 2004 | Mike Konrad
Hi Patrick, With all due respect, it is easy to quantify zero. You made a claim that your flux produces ZERO residue. There are several industry-standards (IPC and Military) of determining the cleanliness of post-reflowed circuit assemblies. Th
Electronics Forum | Sun Feb 26 21:48:28 EST 2006 | Mike Konrad
Hi GS, Just a clarification� No-clean does NOT equal no ions. It equals less ions (at best). Automatic R.O.S.E (Resistivity Of Solvent Extract) testers are commonly used to detect ionic contamination from no-clean applications. Your comment rega
Electronics Forum | Fri Jan 08 12:27:55 EST 2016 | aqueous
The most common method is a R.O.S.E tester. They have been around for 30 years and are an industry standard for ionic contamination (flux and other residues) testing. Manufacturers include: Zero Ion www.aqueoustech.com Omegameter / Ionagraph http:/
Electronics Forum | Mon Oct 21 22:15:36 EDT 2002 | davef
First, SIR data is heavily dependant on the test pattern selected. Be very careful when comparing the results of resistance readings taken from different geometric patterns. Second, if yer talkin': * Bare boards, yupper. * Finished assemblies impor
Electronics Forum | Thu May 26 19:32:13 EDT 2005 | Mike Konrad
Three popular methods: Resistivity of Solvent Extract (ROSE) Test Method IPC-TM-650 2.3.25: The ROSE test method is used as a process control tool to detect the presence of bulk ionics. The IPC upper limit is set at 10.0 *g/NaCl/in2. This test is p
| 1 |
