Electronics Forum | Wed Jan 18 15:21:58 EST 2006 | adlsmt
FYI, if you are using 13" reels, for 8mm parts, you need a different feeder with a larger reel holder. If you get the larger reel holder and if you are using quick change carts, you need the cart for that type of feeder as they also make one that doe
Electronics Forum | Mon Jun 24 14:52:40 EDT 2013 | ryansmta
I am in need of two Fuji or Panasonic "tape and reel" holders. I will be using them to hold dummy 0402 and 0201 outline components which have undergone some special treatment and packaged in tape and reel. This is not for SMT application but for s
Electronics Forum | Wed Jun 26 17:51:55 EDT 2013 | ryansmta
Thank you for your response and interest to help me with my research work. I am actually in need of the Reel Holder. I am aware of a few services that can package the treated 0402 / 0201 components into a tape and reel. I have also spoken to MidAm
Electronics Forum | Wed Oct 28 20:40:11 EST 1998 | Marla
| I am looking for some esd storage containers for tape and reel components in the stockroom. Shelves or bins. Any ideas. | We use the Brick Container conductive heavy duty cardboard reel holders. They are very durable and cost effective.
Electronics Forum | Thu Dec 04 15:27:26 EST 2008 | jax
Check the spring tension on the reel holder. When the reels start running out of parts the spring can provide enough tension to keep the reel from spinning. I have seen this on some of the dual-lane feeders. Tape the spring back to verify. If this is
Electronics Forum | Mon Dec 08 07:52:22 EST 2008 | vleasher
Check the spring tension on the reel holder. When > the reels start running out of parts the spring > can provide enough tension to keep the reel from > spinning. I have seen this on some of the > dual-lane feeders. Tape the spring back to > ver
Electronics Forum | Tue Jun 25 11:03:44 EDT 2013 | ryansmta
Thanks Davef! I'm actually posting on behalf of another member who teaches at New Jersey Institute of Technology in Newark, B. S. Mani (phone 630-345-0558.) Not sure what the project is but I will make sure to pass your recommendations on.
Electronics Forum | Sat Oct 25 19:02:45 EDT 2003 | Gabriele
Main difference is the reel holder position and for sure the clamping pin location. Tape feeding system is different. Any way they cannot be compatible among them. Q type feeders must be used for MV Q-Type placer and K-type feeders must be used for M
Electronics Forum | Mon Mar 12 18:14:44 EST 2001 | reconsales
We stock over 3000 used Panasert feeders and have many parts in stock. We can also repair / calibrate your feeders with our PFA factory alignment fixture. Please provide us with an accurate description of the parts you need. Give an accurate descri
Electronics Forum | Thu Jul 28 10:42:25 EDT 2016 | mnorthey
We use the Juki electric feeders, I have not seen the mechanical ones. The reel holder is the only problem we have had with these feeders(cheaply built). That said our operators are trained to change a feeder in less than one minute, (originally it w