Industry Directory | Manufacturer
Golden State is a contract manufacturer that makes wire harnesses, electromechanical assemblies (box builds, subassemblies, PCBAs, kits, etc.) and services (sorting, rework, value additive manufacturing engineering)
Industry Directory | Manufacturer
Electronic Manufacturing Services, SMT Surface Mount Assembly & Thru-Hole Assembly & Mixed Technology Assembly, Automatic SMT assembly. Power Supplies from 1 to 20A 0-24Vdc, Relay Interfaces for DIN profile.
RS-1 JUKI Fast Smart Modular Pick and Place Machine The JUKI RS-1 assembly machine has a high assembly speed up to 42000 comp / hour, (29500 comp / hour IPC9850). Mounting accuracy: ± 0.035 mm (Cpk ≧ 1). a wide range of mounted components: 0201 … 74
RS-1 JUKI Fast Smart Modular Pick and Place Machine The JUKI RS-1 assembly machine has a high assembly speed up to 42000 comp / hour, (29500 comp / hour IPC9850). Mounting accuracy: ± 0.035 mm (Cpk ≧ 1). a wide range of mounted components: 0201 … 74
Electronics Forum | Fri Sep 05 13:33:28 EDT 2008 | jmiller
We are having problems with relay package seals cracking and moisture intrusion in power relays on thru-hole assemblies. we use a few different brands of thru-hole relays, we are using a sn-pb process right now and just going to lead-free. the contra
Electronics Forum | Mon Sep 08 08:59:45 EDT 2008 | davef
You're correct: * Sealed relays should not be cracked or have moisture intrusion. * Hand soldering relays is going to be expensive. [Using a mini-solder pot for this might reduce some of the burden.] The good part is that the problem is gross enough
Used SMT Equipment | Chipshooters / Chip Mounters
Product name: YV100X YAMAHA multi-functional chip mounter Product number: YV100X Products in detail YAMAHA multi-function placement machineYAMAHA YV100X substrate size: ATS20 (end to put) W -AT assembly: L460 * W250 (Max)/L50 * W50 (Min)sub
Used SMT Equipment | Soldering - Reflow
The latest breakthroughs associated with the Mark 5 reflow system now provide you with an even lower cost-of-ownership. Heller's new heating and cooling advances deliver up to 40% reduction in nitrogen and electrical consumption. This makes the MK 5
Industry News | 2023-03-30 22:45:02.0
Taoyuan, Taiwan (February 27, 2023) – Heller Industries, a leading provider of reflow and curing ovens for SMT and semiconductor advanced packaging, today announced the opening of a new office in Taoyuan, Taiwan, to meet the growing demand for reflow and curing equipment in the Taiwan region.
Industry News | 2023-06-12 21:14:11.0
The 2023 Beijing Intelligent Manufacturing and SMT Technology Exchange Conference, hosted by the Intelligent Manufacturing Committee of the Beijing Electronics Society, was successfully held in Beijing on May 25th. HELLER was honored to be invited and actively participated by sharing their cutting-edge technology and expertise.
Parts & Supplies | Assembly Accessories
Panasonic SMT Original New holder and nozzle More Panasonic nozzles available N610017373AC KME CM602 120S Nozzle N610030510AC KME CM602 206AS Nozzle N610030510AC N610030510AD KME CM602 206AS Nozzle N610040782AA KME CM402 225C Nozzle N610040783
Parts & Supplies | Assembly Accessories
Panasonic SMT Original New holder and nozzle More Panasonic nozzles available N610017373AC KME CM602 120S Nozzle N610030510AC KME CM602 206AS Nozzle N610030510AC N610030510AD KME CM602 206AS Nozzle N610040782AA KME CM402 225C Nozzle N610040783
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
Technical Library | 2019-08-08 10:23:51.0
High mix production is the mainstay of many electronics assembly plants. Lot sizes and board complexities vary and the boards are often mixed technology, comprising a blend of both surface mount and through-hole technology. Modularizing a production line enables a clear distinction between one type of assembly process and another. This article assumes a modern factory where a job can be routed to the selective soldering machine module, the hand assembly bench, or a combination of both. The decision rules of routing a circuit board through hand assembly versus automated selective soldering are discussed. Hand assembly soldering operations require no explanation.
http://www.gpd-global.com GPD Global expands the performance of its automated dispense systems to run fundamental Pick & Place operations. The same automated fluid dispensing machine is capable of dispensing fluids and also Pick & Place simple compo
www.unisoft-cim.com/cells.html - CELLS WORKFLOW is affordable, simple to setup & use yet powerful product & job tracking software for fast New Product Introduction (NPI). The CELLS WORKFLOW software provides total traceability in manufacturing floor
Training Courses | | | IPC/WHMA-A-620 Specialist (CIS)
The Certified IPC/WHMA-A-620 Specialist (CIS) training focuses on cable and wire harness fabrication and installation.
Training Courses | | | PCB Assembly Courses
The PCB assembly courses provide knowledge of different processes and equipment used in TH and SMT assembly of printed circuit boards.
Events Calendar | Wed Apr 14 00:00:00 EDT 2021 - Wed Apr 14 00:00:00 EDT 2021 | ,
Puget Sound Webinar: PCB Design, Fabrication, and Assembly DFM Webinar
Events Calendar | Thu Sep 17 00:00:00 EDT 2020 - Thu Sep 17 00:00:00 EDT 2020 | ,
DFM Panel Discussion for PCB Design, Fabrication, and Assembly
Career Center | Dallas, Texas USA | Engineering
Skills/Requirements: 7 yrs experience with electric power systems, practices and philosophies, project mananagement skills and a working knowledge of protective relay and automation application. Knowledge of load flow and short circuit studies. Duti
Career Center | Oldsmar, Florida USA | Maintenance,Production
Job Description: • Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on Sub-assemblies which includes installing cables and circuit card assemblies. • Ability to work from diagrams and drawings, ma
Career Center | Grand Rapids, Michigan USA | Engineering,Maintenance,Management,Production,Research and Development,Technical Support
""
Career Center | BANGALORE, India | Engineering,Maintenance,Production
Hi, I have 8 years experience in electronics manufacturing company. I have good knowledge in SMT process and equipment maintenance.i successfully completed more than 200 NPI's. I have good knowledge in SMT machine programming and maintenance
Qinyi Electronics Co.,Ltd | https://www.qy-smt.com/shop/rm1a40d50-relay-221258?page=184&order=list_price+asc
/shop/rm1a40d50-relay-221258 ¥ 0.00 0.0 CNY ¥ 0.00 ¥ 0.00 This combination does not exist. ADD TO CART Inquiry Now > products and services Surplus placement machine SMT peripheral equipment product information contact us
Heller Industries Inc. | https://hellerindustries.com/parts/3351k/
3351K - Timer relay Phone 1-973-377-6800 Company About News Events New Equipment Convection Reflow Ovens Reflow Oven MK7 -New
Golden State is a contract manufacturer that makes wire harnesses, electromechanical assemblies (box builds, subassemblies, PCBAs, kits, etc.) and services (sorting, rework, value additive manufacturing engineering)
18220 Butterfield Blvd
Morgan Hill, USA
Phone: 5102268155
