Electronics Forum | Wed Apr 24 21:33:02 EDT 2019 | pcbindex1
With the upcoming of the traditional peak season(Q3), a rising price among the mainland factories, and a continual rise in the bronze price in the London Metal Exchange in August, there is also a trend for the rise in the quotation of the PCB’s upstr
Electronics Forum | Thu Apr 11 16:37:16 EDT 2002 | pteerink
Profile would be the first place I look. Check your rise and fall rates for temp. Should be no more than 2 deg/sec for rise and 4-6 deg/sec for cooling. Phil
Electronics Forum | Thu Jul 25 14:44:34 EDT 2013 | falvarez
Im needing an Rising table motor for Dek Horizon, but with a 4000 count encoder, because that motor i bought become with a 1000 count encoder and not worked. any suggestion?
Electronics Forum | Fri Feb 10 12:21:20 EST 2023 | youngbuck
Also, tried swapping the Servo card. X7 which is the Rising table servo motor card, swapped with X8,9,10 which are all the same and same result.
Electronics Forum | Wed Aug 02 01:55:34 EDT 2023 | ttheis
The issue ended up being the nozzle changer; Andy from 4tech noticed that the changer was rising unevenly when he measured it in the raised position from the frame rail. He disassembled and cleaned the changer mechanism and the issue was resolved wit
Electronics Forum | Tue Sep 19 15:15:42 EDT 2006 | bigdaddysoy9
Have you tried changing the motor?
Electronics Forum | Fri May 07 23:43:10 EDT 2010 | jlawson
I assume you using a fixed mass vapour phase system? Yes rates of rise are impacted by the mass of the PCB, larger the mass to mass of vapour phase the lower the rise generally. So if you load the machine with very little mass PCB rise times can be
Electronics Forum | Fri Feb 01 13:09:16 EST 2013 | emeto
I am glad you got it. It had to be one of these.
Electronics Forum | Fri Jul 26 07:21:07 EDT 2013 | falvarez
thanks!! confirmed!
Electronics Forum | Fri Sep 07 23:59:24 EDT 2018 | leohdez
I have this problem the led rises after passing through the reflow oven. Could they help me?
