Designed For Use with Multilayer and High Density PCBs The STS-2533SJ is a new Selective soldering system equpped with a Servo Jet Spray Fluxer system. The Servo Jet system allows for precise flux application on small targets and through hole compo
Uses customized and dedicated fixtures/nozzles which eliminates the use of masking tape Lead-free compatible The number of components on the PCB will not affect the tact time Able to control under the temperature range of ±1°C User-friendly desig
Electronics Forum | Fri Nov 14 10:40:35 EST 2014 | eniac
I use a two machines from EBSO, Germany. It's a machines with PCB carrier, so, solder pot is fixed. I'm fully satisfied with this equipment, but I use only wettable nozzles. If you would like to buy a new machine, not in used condition, EBSO will be
• Less then 100 hours • Stand-alone Machine • 2 Spray Nozzles/Programable • Dual Solder pots / Dual Heads – Loaded with SAC305 • Heads can run 4 different assembles • Pot level detection / Upgraded self-feeder • Automatic solder refill / Autom
• Dual Pot Lead/Leadfree • Drop Jet Fluxed • Inerted Nitrogen System • One AP Solder tips • PillarCOMM Windows Software • Solder Wire Feeder • Solder Bath Level Sensor • Solder Wave Height Measurement • Black and White Camera Programming • S
Industry News | 2012-03-09 16:13:42.0
Seika Machinery will highlight its new, innovative products at the upcoming SMTA Indiana Expo & Trade Forum.
Industry News | 2012-01-30 13:43:45.0
Seika Machinery will highlight many new, innovative products at the upcoming SMTA Dallas Expo and Tech Forum.
Detailed Product Description Brand: SMC Part Name: Cylinder Part Number: J90650160C Model: CJ2R10-8.3B-KRJ Origin: China Condition: Original New J90650160C Feeder Cylinder For Samsung SM8mm Feeder 8mm feeder cylinder Deatail Information: 1,
KM0-M711D-00X NOZZLE YAMAHA YAMAHA YV100II YV100-2 nozzle nozzle 33A KM0-M711D-00X NOZZLE YAMAHA YAMAHA YV100II YV100-2 nozzle nozzle 33A Email:email@example.com Skype:smtdwx M/P/Whatsapp/wechat:+8615915451009 WWW.zghuanan.com YAMAHA YVPXG
Technical Library | 2020-11-04 17:49:45.0
OEMs and CMs designing and building electronic assemblies for high reliability applications are typically faced with a decision to clean or not to clean the assembly. If ionic residues remain on the substrate surface, potential failure mechanisms, including dendritic growth by electrochemical migration reaction and leakage current, may result. These failures have been well documented. If a decision to clean substrates is made, there are numerous cleaning process options available. For defluxing applications, the most common systems are spray-in-air, employing either batch or inline cleaning equipment and an engineered aqueous based cleaning agent. Regardless of the type of cleaning process adopted, effective cleaning of post solder residue requires chemical, thermal and mechanical energies. The chemical energy is derived from the engineered cleaning agent; the thermal energy from the increased temperature of the cleaning agent, and the mechanical energy from the pump system employed within the cleaning equipment. The pump system, which includes spray pressure, spray bar configuration and nozzle selection, is optimized for the specific process to create an efficient cleaning system. As board density has increased and component standoff heights have decreased, cleaning processes are steadily challenged. Over time, cleaning agent formulations have advanced to match new solder paste developments, spray system configurations have improved, and wash temperatures (thermal energy) have been limited to a maximum of 160ºF. In most cases, this is due to thermal limitations of the materials used to build the polymer-based cleaning equipment. Building equipment out of stainless steel is an option, but one that may be cost prohibitive. Given the maximum allowable wash temperature, difficult cleaning applications are met by increasing the wash exposure time; including reducing the conveyor speed of inline cleaners or extending wash time in batch cleaners. Although this yields effective cleaning results, process productivity may be compromised. However, high temperature resistant polymer materials, capable of withstanding a 180°F wash temperature, are now available and can be used in cleaning equipment builds. For this study, the authors explored the potential for increasing cleaning process efficiency as a result of an increase in thermal energy due to the use of higher wash temperature. The cleaning equipment selected was an inline cleaner built with high temperature resistant polymer material. For the analysis, standard substrates were used. These were populated with numerous low standoff chip cap components and soldered with both no-clean tin-lead and lead-free solder pastes. Two aqueous based cleaning agents were selected, and multiple wash temperatures and wash exposure times were evaluated. Cleanliness assessments were made through visual analysis of under-component inspection, as well as localized extraction and Ion Chromatography in accordance with current IPC standards.
Technical Library | 1999-08-27 09:27:10.0
Conformal coating is a material that is applied to electronic products or assemblies to protect them from solvents, moisture, dust or other contaminants that may cause harm. Coating also prevents dendrite growth, which may result in product failure. This paper will discuss the variables that affect the application of conformal coatings, and review in detail those variables that impact the process of selective coating of printed circuit boards.
http://www.gpd-global.com Pair Time Pressure with Real Time Process Control (Fluid Pressure Control) to dispense Solder Mask WSOL with outstanding result. Watch this dispensing process on a bench top robot. More Info: http://www.gpd-global.com/co_w
SMTnet Express, May 24, 2018, Subscribers: 31,054, Companies: 10,942, Users: 24,751 Wettable-Flanks: Enabler for the Use of Bottom-Termination Components in Mass Production of High-Reliability Electronic Control Units Udo Welzel, Marco Braun
ControlFlow Solder Nozzles Drop-Jet Fluxing Full Surface Preheating In-Process Flux Verification Microdrop Flux Dispenser Parallel Double Selective Soldering PhotoScan Software Solder Nozzle Cleaning Spray Fluxing SWAK-OS
manufacturer’s needs, with world class service and support for all of our fluxing systems. Selective Solder Fluxing Systems Include: Ultrasonic nozzle with focus-adjustable air shroud