Electronics Forum | Tue Aug 10 06:58:48 EDT 2004 | dka123
dear all, kindly guide me for the use of space electronics hardware assembky of PQFPs and Cqfps, how to form the flat pack leads, bend for 240 pins of 20 mil pitch and what are the Mil standards for them.how to cut the lead guards.can we use FP5 elit
Electronics Forum | Thu Mar 18 14:33:46 EDT 2010 | jdumont
Is your peak reflow temp exceeding the LED spec? We store our SMT LED reels on the rack with the rest of the discreets and have never seen this issue...
Electronics Forum | Wed May 20 07:13:15 EDT 1998 | smd
Does anyone use the "Quick Frame" with their Dek printer? The threads on the screws keep stripping, so we thought maybe we'd send our frames to a machine shop for heftier screws. Has anyone done this? Is there a better way? Isn't it weird how Alpha k
Electronics Forum | Thu Jun 11 07:28:12 EDT 1998 | smd
Before risking screwing up the alignment of the frame, and upon the advice of several SMTNET users, I decided to see if I could get away W. just changing the screws. I found screws with 2x the pull strength as Alpha's. But they didn't fit!! The Alph
Electronics Forum | Tue Jul 28 07:02:59 EDT 1998 | smd
Right now we are taping the goldfingers which is effective but also expensive. Also, some tape was leaving yellow marks on the goldfingers. We're trying the so-called goldfinger glove from Steven's Products. It's a very small company (probably one gu
Electronics Forum | Tue Jul 07 12:33:39 EDT 1998 | smd
I am about to place a huge PO for ESD boxes. Our assemblies need to be placed horizontally in the stainless racks until wavesoldered, but after the wash they will be placed in the boxes. The boxes have a conductive film but they are still cardboard
Electronics Forum | Thu Jul 09 08:03:48 EDT 1998 | smd
OK, I'll take a little abuse as long as you guys are giving me all this great advice. I am concerned about what might happen when a drop here and there comes from the connectors and is absorbed into the box. The box is going to suffer from this. I am
Electronics Forum | Thu Jul 09 08:04:11 EDT 1998 | smd
OK, I'll take a little abuse as long as you guys are giving me all this great advice. I am concerned about what might happen when a drop here and there comes from the connectors and is absorbed into the box. The box is going to suffer from this. I am
Electronics Forum | Fri Jul 23 12:49:47 EDT 1999 | Tony
| There is a practise within the industry of an Inspector inspecting a board, and that same Inspector performing touch-up. My opinion is that the Inspection and Touch-up operations should be separate functions whereby the Inspector is not performing
Electronics Forum | Tue Jun 05 20:45:54 EDT 2001 | davef
So, yer lookin' to detect a ~25um glob on the wall of the aperture on yer stencil, eh? Why not wash your stencils before you put them away? That's what we do. Give 'em a quick looksee, then rack 'em, if they're clean. Give 'em anudda looksee befo