156 smtnet and 2farchives results

Electronics Forum: smtnet and 2farchives (Page 1 of 16)

Td and Tg

Electronics Forum | Wed Aug 27 21:22:44 EDT 2008 | davef

While you're waiting for others to reply, here are a couple of previous postings from the fine SMTnet Archives: * http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=45013 * http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=50312

PCB Storage and FIFO

Electronics Forum | Wed Sep 24 11:43:15 EDT 2008 | pgarsoe

I'm not sure this would solve your problem but Inovaxe has done a good job of solving MSD and inventory handling and control. They are also a sponsor of SMTnet...here is their SMTnet listing followed by thier web site for their carts... http://www.sm

Conveyors and bar code

Electronics Forum | Tue Aug 22 20:32:40 EDT 2006 | davef

Fixed position (mounted) [In-line] laser bar code scanners: * microscan 800.762.1149 info@microscan.com [Ken SMTnet] * symbol technologies symbol.com [Russ SMTnet] * Keyence and RVSI inline scanners [B Norman SMTnet] * Datalogic TC1100 bartec-systems

Tg and reflow

Electronics Forum | Mon Dec 19 07:49:33 EST 2005 | davef

=330*C is good advice. Search the fine SMTnet Archives for earlier discussions on Td, like http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=32430

Tape and Reel

Electronics Forum | Thu Aug 08 14:59:07 EDT 2002 | cfraser

Check the equipt. page on SMTnet. I have found some good deals there on the Vtec's.

COB and wire bond

Electronics Forum | Mon May 07 22:29:52 EDT 2001 | davef

4 wire per sec ... you figure how many you need] Encapsulation ~$120K for a dispenser [10 sec per die ... you figure how many you need] plus a cure oven ~$100k Throw in a another ~$100k for marking and cleaning Check the September 2000 SMTnet New

SMTnet Cookies and You

Electronics Forum | Wed Oct 07 11:51:51 EDT 1998 | Clifford Peaslee

You may have noticed that we have started using cookies on the site, and I wanted to explain the importance of cookies. Cookies are used at SMTnet to facilitate future enhancements of the site like personalizing your experience while browsing our si

black and grey pad

Electronics Forum | Sat Oct 06 08:42:21 EDT 2001 | davef

Please give us additional background on your board, solder, process, etc. If you are talking about black pad in ENIG solderability preservative, check the fine SMTnet archives to get started.

Tape and Reel

Electronics Forum | Thu Aug 08 10:59:19 EDT 2002 | davef

Tape & reel service suppliers http://www.smtnet.com//forums/index.cfm?fuseaction=view_thread&CFApp=1&Thread_ID=500&#Message3054&

Pad and Component Dimensions

Electronics Forum | Tue Jun 03 08:15:10 EDT 2003 | davef

On pad design, look here: http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=18036 On component sizes, look here: http://www.practicalcomponents.com