Industry Directory | Manufacturer
PCB Repairs of all kinds including-Solder on Tab (Solder Removal, Gold Plating), PTH & Delam repairs, etc.
Industry Directory | Manufacturer
Manufacturer of pulse heated reflow soldering and resistance welding equipment.
New Advanced Precision Auger Pump - Single Pump Solution The Precision Auger pump is designed to work with mid-to-high viscosity liquid such as glues, conductive, and non-conductive adhesive and pastes. The pump is controlled with a servo motor equ
New Equipment | Rework & Repair Equipment
The tool ends are made of high quality Swedish Hardened Tool Steel, carefully heat treated and tempered to provide a tough, long lasting working edge that resists wear.
Electronics Forum | Sat May 02 08:48:32 EDT 2009 | davef
You have a board defect. Any moisture and/or organic contaminants trapped by the solder resist during lamination may cause solder mask delamination, blistering and/or adhesion loss during subsequent soldering operations or during extended use.
Electronics Forum | Fri May 08 09:44:23 EDT 2009 | davef
Board fabricators use solder as a resist to protect copper traces from process chemicals. Fabricators remove this resist in later processing. It's possible that board fabrication processing is the source of the tin that you see.
Used SMT Equipment | Soldering - Wave
this type can be added with nitrogen protection system 1 Flux spraying system 1.1 Spray fluxer can sense the board size automatically, and the spraying area can be adjusted according to the width of PCB. 1.2 Spray fluxer can sense the conveyor
Used SMT Equipment | AOI / Automated Optical Inspection
Really high quality used solder paste inspection with 1 year warranty Features BF-SPIDER - SOLDER PASTE INSPECTION DESCRIPTION: 1. The newly developed Phase Measurement Profilometer Technology ensures high inspection repeatability. 2. Advan
Industry News | 2016-02-27 22:11:00.0
GPD Global has advanced its auger pump technology with the introduction of the newly developed Precision Auger Pump. This pump was designed to offer a wide range of functionality in your process development by being compatible with a wide range of auger/cartridge assemblies.
Industry News | 2003-06-04 08:27:58.0
DuPont cites rising raw material, transportation and energy costs as reasons for the increase.
Parts & Supplies | Assembly Accessories
TEST PCB LP3 ..00359534-01 Tester PEL-2002A Push pull tester NK-500 Neon lamp tester SX-C Test Probes (Universal Probe) TL20 Probes Connector Test Point temp (Male) SMPW-K-M. DIP TESTER DS-10
Parts & Supplies | Assembly Accessories
TEST PCB LP3 ..00359534-01 Tester PEL-2002A Push pull tester NK-500 Neon lamp tester SX-C Test Probes (Universal Probe) TL20 Probes Connector Test Point temp (Male) SMPW-K-M. DIP TESTER DS-10
Technical Library | 2019-07-10 23:36:14.0
Pockets of gas, or voids, trapped in the solder interface between discrete power management devices and circuit assemblies are, unfortunately, excellent insulators, or barriers to thermal conductivity. This resistance to heat flow reduces the electrical efficiency of these devices, reducing battery life and expected functional life time of electronic assemblies. There is also a corresponding increase in current density (as the area for current conduction is reduced) that generates additional heat, further leading to performance degradation.
Technical Library | 2019-06-04 10:19:46.0
Interconnection technology relies very heavily on the ability of the conductors on a printed wiring assembly to maintain reliable signal integrity. Harsh environmental factors can precipitate a loss of conductivity due to oxidation and corrosion. Connections are typically soldered or inserted using pressure fitted connectors to obtain enough surface contact to meet the electrical conductivity requirements. In pressure contacts, surface integrity is especially critical where the abrasive effects of retraction and insertion can wear off the metallic finish from the contact area. This can expose the underlying copper or nickel and lead to increased resistance at the contact points. These types of conductors are frequently found in card edge connectors where the terminations are plated with a layer of nickel and gold (frequently referred to as gold fingers). A hard gold is typically used containing very small amounts of nickel and cobalt to increase the wear resistance.
New Advanced Precision Auger Pump - Single Pump Solution The Precision Auger pump is designed to work with mid-to-high viscosity liquid such as glues, conductive, and non-conductive adhesive and pastes. The pump is controlled with a servo motor equ
https://www.ascen.ltd/Products/Solder_paste_printer/513.html full auto PCB screen printer and SMT solder paste printing machine with Image and optical system,It is a very accurate fully automatic SMT stencil printer.automatic PCB screen printer main
Training Courses | | | IPC-600 Specialist (CIS)
The Certified IPC-600 Specialist (CIS) training targets quality assurance and acceptance of bare printed circuit boards.
Training Courses | | | IPC-600 Specialist (CIS)
The Certified IPC-600 Specialist (CIS) training targets quality assurance and acceptance of bare printed circuit boards.
Events Calendar | Mon Sep 14 00:00:00 EDT 2020 - Mon Sep 14 00:00:00 EDT 2020 | ,
Printed Circuit Board (PCB) Inspection & Quality Control
Events Calendar | Mon Apr 23 00:00:00 EDT 2018 - Thu Apr 26 00:00:00 EDT 2018 | Shanghai, China
SMTA China East Conference 2018
Career Center | Auckland, New Zealand | Engineering
NAVMAN PCBA NPI Engineer Reporting To: PCBA NPI Technical Leader Primary Objective: Transition of PCBs from R&D design to a manufacturable state conforming to all facets of PCBA production Secondary: Develop DFM & best practice guidelines Res
Career Center | , District of Columbia | Engineering,Management,Production,Sales/Marketing
• Strong technical leadership and decision-making skills; strong verbal and written communication skills to provide clear, crisp direction for key issue resolution; and good team skills to facilitate cross-functional cross -site team effectiveness.
Career Center | binan city, Laguna Philippines | Engineering,Maintenance,Technical Support
6.5 Years Experience in Semiconductor Industry Specializing in Dispensing process and Equipment. 5.0 Years of Experience in Field Service Engineering. Machine Commissioning / Customer support 24 / 7, Technical Support for Customer machine and process
Heller Industries Inc. | https://hellerindustries.com/delamination/
– Reflow Soldering Solder Ball Defects Insufficient Solder Wicking Defects Tombstoning PCB Soldering PCB Bridging Defects PCB Dewetting PCB Nonwetting Circuit Board Voids PCB Delamination Component
| http://etasmt.com/cc?ID=te_news_bulletin,23574&url=_print
>> News Circuit Board Voids & PCB Delamination Circuit Board Voids Circuit Board Voids are cavities or air pockets inside the solder joint formed by gases that are released during reflow or by flux residues that fail to escape
