Industry Directory | Manufacturer / Research Institute / Laboratory / School
ScyTek Laboratories Inc Biotech manufactures diagnostic reagents, Special Stains, Antibodies, Hematology, Immunohistochemistry, buffers, Microbiology, Hematoxlyn etc https://www.scytek.com
Industry Directory | Manufacturer
Manufacturer of solder products - pb free alloys, wire solder, bar solder, liquid flux, solder paste & stained glass solder
ML-A410 SMT Automated Optical Inspection Machine Feature ▶Economical and practical AOI. ▶High precision detection platform design. ▶Fast programming debugging integration. ▶Automatic recognize the Tip and Bottom side. ▶Professional SPC system.
SMT Automatic Optical Inspection Machine ZMA410 Feature ▶Economical and practical AOI. ▶High precision detection platform design. ▶Fast programming debugging integration. ▶Automatic recognize the Tip and Bottom side. ▶Professional SPC system. Speci
Electronics Forum | Wed Sep 26 12:16:44 EDT 2012 | bwjm
Hi Guys,recently i am facing an issue. Refer to the attached photo. This PCB is high RF speed, gold immersion single layer. After reflow, my solder seems to have black stains on it. I tried with SAC305 paste water soluble and no-clean, both results a
Electronics Forum | Sat Jan 19 02:25:37 EST 2002 | ianchan
Hi, Have a board run, using 63/37 Water Souble (WS) process. during the reflow setup time, we had unsolder issues on a leadless bump chip carrier (BCC) IC level package. To rectify the unsolder rejects, we adjusted the reflow time from 25-55sec into
.jpg)
Used SMT Equipment | Soldering - Wave
This Hollis Engineering TDA-14 Automated Wave Soldering Machine is in fair cosmetic condition with scuffs, scratches, staining, and other signs of use. Sorry for the incorrect Manufacturers name on listing (Hover Davis) , There was no option for th
Used SMT Equipment | Soldering - Wave
This Manncorp AE-350SS Wave Solder Machine is in good cosmetic condition with some scuffs and exterior staining. This unit appears to have little to no previous use, though I do not have full details on its history. “Unit was removed from a worki
Industry News | 2022-10-12 08:07:17.0
I.C.T Provide SMT Production Line solutions with Automated Optical Inspection (AOI) AOI is short for Automated Optical Inspection, which is widely used in the electronics industry to check the appearance of PCBA assembly at the back end of the circuit board assembly line. The basic principle of AOI is to judge whether the object to be tested meets the standard by comparing whether there is a large difference between the object to be tested and the standard image by using image technology. AOI emits a 4-color light source to the PCBA board, which is automatically scanned by an industrial camera for catastrophic failures, such as missing components or quality defects. Therefore, the quality of AOI depends on the image imaging ability, algorithm parsing ability and image discrimination technology. I.C.T AOI has done well in these aspects.
Industry News | 2013-05-06 18:37:45.0
Kyzen will showcase the newest fast-drying stencil cleaner in Booth #G22 at NEPCON Malaysia 2013, from June 10-12, 2013 at the Penang International Sports Arena (PISA). Kyzen® E5615 addresses the market need for a stencil cleaner that dries quickly, using only airflow at ambient temperature and without staining.
ML-A410 SMT Automated Optical Inspection Machine Feature ▶Economical and practical AOI. ▶High precision detection platform design. ▶Fast programming debugging integration. ▶Automatic recognize the Tip and Bottom side. ▶Professional SPC system.
I.C.T Provide SMT Production Line solutions with Automated Optical Inspection (AOI) AOI is short for Automated Optical Inspection, which is widely used in the electronics industry to check the appearance of PCBA assembly at the back end of the cir
ASCEN Technology | https://www.ascen.ltd/Video_Channel/Non-standard_equipment/519.html
. PCB inspection machine are able to detect a variety of surface feature defects such as nodules, scratches and stains as well as the more familiar dimensional defects such as open circuits, shorts and
Imagineering, Inc. | https://www.pcbnet.com/blog/a-guide-to-pcb-inspection-methods/
. It is particularly useful for detecting issues early in printed circuit board manufacturing, such as scratches, nodules, stains, thinning solder, open circuits, and short circuits
