Electronics Forum | Wed Jun 27 15:11:54 EDT 2007 | bkgsmtnet
Does anyone have contact info for Cable/Wire Assmbly ...Preperation Machines...like wire cutting and stripping and terminal machines?? Handtools and semi automatic machines? Thanks B
Electronics Forum | Mon Nov 14 09:12:24 EST 2022 | kutayuysal
My company would like to invest and SMT Line boards. Boards are simple for P&P machines, couple of 603 and 402 components which most of machines are capable to place. Challenging part is Pin-in-Paste terminals. Those terminals produce with metal stri
Electronics Forum | Tue Apr 11 20:31:54 EDT 2000 | Dave F
Russ: You�re correct. I should have explained our reasons for preferring concave over convex better. First, we use both also ... we just prefer concave because they: * Don�t bridge any where near as easily. * Self-center better. * Seem to have mor
Electronics Forum | Tue Feb 14 13:16:49 EST 2006 | Carol Stirling
CRITICAL DILEMA! Has anyone run into the problem described below and if so, what was the fix (besides not dealing with this Supplier)? Also, we do not have component manufacturing process experience. We are purchasing a surge resistor that function
Electronics Forum | Fri Nov 16 08:41:34 EST 2018 | davef
Here's a similar thread earlier in SMTnet FORUM -- Soldering to a nickel plated battery terminal [ https://smtnet.com/Forums/index.cfm?fuseaction=view_thread&CFApp=1&Thread_ID=17474&#Message71990 ] We still have our neighborhood Batteries+ attach so
Electronics Forum | Sun Feb 03 08:46:34 EST 2019 | dfl
SOLVED The LED/phototransistor was a little of the center on the "index wheel" (don't know a better name, its the gear that pulls the component strip). The wheel works with a LED from one side and a phototransistor from the other, through a hole on
Electronics Forum | Mon Mar 09 15:03:41 EDT 2020 | davef
snip from https://hackaday.com/2020/03/09/pcb-finishes-hack-chat PCB FINISHES HACK CHAT No comments by: Dan Maloney March 9, 2020 Join us on Wednesday, March 11 at noon Pacific for the PCB Finishes Hack Chat [https://hackaday.io/event/169956-pcb-
Electronics Forum | Fri Jun 19 10:03:46 EDT 1998 | Earl Moon
| Has anyone had experience with placing BGA on gold plated boards. I thought I read a while ago there was a problem with embrittlment causing cracked joints. If anyone has experience with this your feedback would be great. | Mike Mike, We and ind
Electronics Forum | Fri Jun 30 06:07:12 EDT 2006 | slaine
Hi If all the solder has collected onto the component termination then it sounds more of a PCB problem then a component problem. Some times all the temination can be stripped off the ceramic with high tin content solders and leave a gray finish behi
Electronics Forum | Wed Apr 11 06:56:20 EDT 2001 | brownsj
Most of the component vendors I've dealt with will guarantee the solderability of the terminations for three years if the components are still packaged in a full reel. If the reel is part used we've kept them for 1 year and then used a wetting balanc
.gif)
