Industry Directory | Research Institute / Laboratory / School
BME is considered the world's oldest Institute of Technology which has university rank and structure. It was the first institute in Europe to train engineers at university level.
New Equipment | Test Equipment
slim kic 2000 Specifications: KIC 2000 Profiler * 9 Channels Slim Kit KIC 2000 Profiler * 9 Channels * Full Original Package, with original Thermal Couples, Protective Shield, Software, etc * Technical Support and Warranty from USA * Thermal Pr
New Equipment | Test Equipment
SLIM KIC 2000 SPECIFICATIONS: KIC 2000 Profiler * 9 Channels Slim Kit KIC 2000 Profiler * 9 Channels * Full Original Package, with original Thermal Couples, Protective Shield, Software, etc * Technical Support and Warranty from USA * Thermal Pr
Electronics Forum | Fri Mar 18 11:26:02 EST 2005 | KEN
KIC Thermal Its on the web site (just root around) There is an excellent white paper on comparisons of the major attachment methods. Solder, kapton, epoxy etc. Cameron S. is the author.
Electronics Forum | Thu Jun 10 21:43:18 EDT 1999 | Dean
| | Does anyone out there involved in RF manufacture have any experience with the KIC Slim-Kic profiler? Do you find any interference problems between the RF transmissions and the testing of your products. We build primarily high-freq stuff like poin
Used SMT Equipment | Soldering - Reflow
Heller Reflow Oven Model: 1913 MK III Vintage: 2012 Power: 480V Left to Right Flow Edge Rail Conveyor Upgraded Kick RPI 24/7 Thermal Couple Upgraded Electronic Exhaust Monitoring 13 Heating Zones - Top & Bottom 3 Cooling Zones Complete
Industry News | 2010-12-07 14:53:07.0
GPD Global announces that its Positive Cavity Displacement (PCD) technology is proven with silver-filled electrically and thermally conductive adhesives.
Industry News | 2011-11-20 13:36:13.0
GPD Global has been awarded two Global Technology Awards in the categories of Adhesives/Coatings/Encapsulants and Dispensing Equipment for its PCD Dispensing on the MAX Series Platform
Parts & Supplies | Assembly Accessories
Part Name: KIC Explorer Model: KIC Explorer Brand: KIC Accuracy: +/-0.5 Deg.C Temperature Range: Can Up To 350-400 Deg.C Size: 320*86*26（mm） SMT thermal profiler KIC explorer,Reflow oven checker kic profiler KIC Explorer * Replacement for KIC
Parts & Supplies | Chipshooters / Chip Mounters
> JUKI ESL13000000 VACUUM PAD 15 JUKI ESL13000100 PHOTO MICRO SENSOR A JUKI ESL13001000 TUBE union (KL700) JUKI ESL130011A0 CONVEYOR MOTOR (KZ500) JUKI ESL13002000 CLAMP LEVER JUKI ESL13003000 T TYPE NUT JUKI ESL130031A0 OPERATION PANEL (KL700) JUKI
Technical Library | 2023-11-14 19:52:11.0
The continuous drive in the Electronics industry to build new and innovative products has caused competitive design companies to develop assemblies with consolidated PCB designs, decreased physical sizes, and increased performance characteristics. As a result of these new designs, manufacturers of electronics are forced to contend with many challenges. One of the most significant challenges being the processing of thru-hole components on high thermal mass PCBs having the potential to exceed 20 layers in thicknesses and have copper mass contents of over 40oz. High thermal mass PCBs, coupled with the use of mixed technologies, decreased component spacing, and the change from Tin Lead Solder to Lead Free Alloys has lead many manufacturing facilities to purchase advanced soldering equipment to process challenging assemblies with a high degree of repeatability.
Technical Library | 2019-09-24 15:41:53.0
This paper focuses on three different coating material groups which were formulated to operate under high thermal stress and are applied at printed circuit board manufacturing level. While used for principally different applications, these coatings have in common that they can be key to a successful thermal management concept especially in e-mobility and lighting applications. The coatings consist of: Specialty (green transparent) liquid photoimageable solder masks (LPiSM) compatible with long-term thermal storage/stress in excess of 150°C. Combined with the appropriate high-temperature base material, and along with a suitable copper pre-treatment, these solder resists are capable of fulfilling higher thermal demands. In this context, long-term storage tests as well as temperature cycling tests were conducted. Moreover, the effect of various Cu pre-treatment methods on the adhesion of the solder masks was examined following 150, 175 and 200°C ageing processes. For this purpose, test panels were conditioned for 2000 hours at the respective temperatures and were submitted to a cross-cut test every 500 h. Within this test set-up, it was found that a multi-level chemical pre-treatment gives significantly better adhesion results, in particular at 175°C and 200°C, compared with a pre-treatment by brush or pumice brush. Also, breakdown voltage as well as tracking resistance were investigated. For an application in LED technology, the light reflectivity and white colour stability of the printed circuit board are of major importance, especially when high-power LEDs are used which can generate larger amounts of heat. For this reason, a very high coverage power and an intense white colour with high reflectivity values are essential for white solder masks. These "ultra-white" and largely non-yellowing LPiSM need to be able to withstand specific thermal loads, especially in combination with high-power LED lighting applications. The topic of thermal performance of coatings for electronics will also be discussed in view of printed heatsink paste (HSP) and thermal interface paste (TIP) coatings which are used for a growing number of applications. They are processed at the printed circuit board manufacturing level for thermal-coupling and heat-spreading purposes in various thermal management-sensitive fields, especially in the automotive and LED lighting industries. Besides giving an overview of the principle functionality, it will be discussed what makes these ceramic-filled epoxy- or silicone-based materials special compared to using "thermal greases" and "thermal pads" for heat dissipation purposes.
slim kic 2000 Specifications: KIC 2000 Profiler * 9 Channels Slim Kit KIC 2000 Profiler * 9 Channels * Full Original Package, with original Thermal Couples, Protective Shield, Software, etc * Technical Support and Warranty from USA * Thermal Pr
SLIM KIC 2000 SPECIFICATIONS: KIC 2000 Profiler * 9 Channels Slim Kit KIC 2000 Profiler * 9 Channels * Full Original Package, with original Thermal Couples, Protective Shield, Software, etc * Technical Support and Warranty from USA * Thermal Pr
Events Calendar | Wed Dec 06 00:00:00 EST 2017 - Wed Dec 13 00:00:00 EST 2017 | Rolling Meadows, Illinois USA
X-Ray of PCBs Webtorial
Embedded Thermoelectric Cooling Article Embedded Thermoelectric Cooling Thin film thermoelectric devices offer a fundamentally new operating regime for integrated, active cooling solutions and localized thermal management, yet the assembly
SMTnet Express March 28, 2013, Subscribers: 26288, Members: Companies: 13327, Users: 34493 A Designed Experiment for the Influence of Copper Foils on Impedance, DC Line Resistance and Insertion Loss by: Alexander Ippich; Multek For the last couple
PCB Libraries, Inc. | https://www.pcblibraries.com/forum/RSS_how-to-make-hybrid-qfn-with-multiple-thermal-pads_topic1947.xml
PCB Libraries Forum : How To Make Hybrid QFN with Multiple Thermal Pads? PCB Libraries Forum : How To Make Hybrid QFN with Multiple Thermal Pads
Precision PCB Services, Inc | https://precision-pcb-services-inc.com/collections/bga-rework-stations/products/shuttle-star-sv560-a-bga-rework-station-u-s-distributor
. The rapid-IR underheater is a must for large PCB's with many layers or heavy ground planes. SV560-A Demo Video Features: High Resolution HDMI Vision System Fits Boards up to 24", upgrade to 36" Places components from 1mm to 60mm Five Thermal Couple Inputs
.gif)
