Industry Directory | Distributor / Other
KIWI is the leading provider of top-tier VR accessories.
Industry Directory | Consultant / Service Provider / Manufacturer
Electronics Manufacturing Services; Printed Circuit Board Assembly; Box build including IoT and IIoT Gateways and Hubs. New (2014) assembly line including selective solder. Design support. PCB layout. DfM
New Equipment | Board Handling - Conveyors
PCB traverser is used to connect dual lane with single lane equipment in the production line, and also can be used as a fixed rail changer for the PCB intelligent assembly line. If you want know more solution for the SMT manufacturing line, please
New Equipment | Board Handling - Conveyors
The PCB Traverser has horizontal movement and go-through functions, is used for transporting boards from one line into two lines. The more detail and video please check the link: www.ascen.ltd Any inquiry please se
Electronics Forum | Fri Sep 25 17:07:57 EDT 2009 | kircchoffs
does anyone knows how to calculate a correct fluxer traverse speed if given a spray width,pcb width & length and wave conveyor speed? thanks
Electronics Forum | Wed Sep 30 13:13:16 EDT 2009 | mikesewell
I never calculate it when I setup a profile...I have a feel for our fluxer setting and adjust based on belt speed and width. I also have different nozzles and a pressure setting to play with. Inspect the bottom of the board for good coverage. Runn
Used SMT Equipment | Coating and Encapsulation
I would like to check with you if you may have interest for SMT HTT 4.5 K 0.7 curing oven. Y/M 2015, but it was never used, brand new condition. It is quattro lane operated machine - edge belt type - 50 mm top & bottom component clearance - Fr
Used SMT Equipment | Conveyors
Description Type S/N Bare board loader NTM210BLBP 10087D Bare board loader NTM210BL 10676K1 Bare board loader NT210BMBP 8255B Bare board loader NTM210BLBP 8470E2 Dual Track Traverser NTM910DTTV 10749J1 Dual Track Traverser NTM910DTTV 10785J1 H
Industry News | 2022-02-07 17:26:54.0
From revolutionary innovations displayed on the show floor to expert insights conveyed in technical conference sessions, professional development courses and standards development committee meetings, IPC APEX EXPO 2022 provided the education and networking connections that helped 3,647 visitors address today's business challenges and prepare for their factories of future.
Industry News | 2001-02-12 16:28:41.0
Ultrasonic Systems introduces the EZ-Flux automatic spray fluxing system for economical application of flux to printed circuit boards. EZ-Flux utilizes spray nozzle technology with two-direction spray. An air-actuated traversing mechanism provides precise motion control at a speed of 10-15 inches per second.
Parts & Supplies | Pick and Place/Feeders
Traverse link grey 3-wire
Technical Library | 2020-05-07 03:46:27.0
The selective soldering process has evolved to become a standard production process within the electronics assembly industry, and now accommodates a wide variety of through-hole component formats in numerous applications. Most through-hole components can be easily soldered with the selective soldering process without difficulty, however some types of challenging components require additional attention to ensure optimum quality control is maintained. Several high thermal mass components can place demands on the selective soldering process, while the use of specialized solder fixtures and/or pallets often places an additional thermal demand on the preheating process. Fine-pitch through-hole components and connectors place a different set of demands on the selective soldering process and typically require special attention to lead projection and traverse speed to minimize bridging between adjacent pins. Dual in-line memory module (DIMM) connectors, compact peripheral component interface (cPCI) connectors, coax connectors and other high thermal mass components as well as fine-pitch microconnectors,can present challenges when soldered into backplanes or multilayer printed circuit board assemblies. Adding to this challenge, compact peripheral component interface connectors can present additional solderability issues due to their beryllium copper termination pins.
Technical Library | 2022-08-08 15:06:06.0
Selective soldering has evolved to become a standard production process within the electronics assembly industry, and now accommodates a wide variety of through-hole component formats in numerous applications. Most through-hole components can be easily soldered with the selective soldering process without difficulty however some types of challenging components require additional attention to ensure that optimum quality is maintained. Several high thermal mass components can place demands on the selective soldering process, while the use of specialized solder fixtures, or solder pallets, often places additional thermal demand on the preheating process. Fine-pitch through-hole components and connectors place a different set of demands on the selective soldering process and typically require special attention to lead projection and traverse speed to minimize bridging between adjacent pins. Dual in-line memory module (DIMM) connectors, compact peripheral component interface (cPCI) connectors, coax connectors and other high thermal mass components as well as fine-pitch microconnectors, can present challenges when soldered into backplanes or multilayer printed circuit board assemblies. Adding to this challenge, compact peripheral component interface connectors can present additional solderability issues because of their beryllium copper base metal pins. Key Terms: Selective soldering, drop-jet fluxing, sustained preheating, flux migration, adjacent clearance, lead-to-hole aspect ratio, lead projection, thermal reliefs, gold embrittlement, solderability testing.
PCB shuttle conveyor/PCB traverser/shuttle traverser Conveyor/PCB conveyorhttps://www.ascen.ltd/Products/Automatic_SMT_equipment/PCB_conveyor/126.html the automatic PCB shuttle conveyor is used to connect dual lane with single lane equipment in the p
PCB shuttle conveyor/PCB traverser/shuttle traverser Conveyor/PCB conveyorhttps://www.ascen.ltd/Products/Automatic_SMT_equipment/PCB_conveyor/126.html the automatic PCB shuttle conveyor is used to connect dual lane with single lane equipment in the p
1st Place Machinery Inc. | http://www.firstplacemachinery.com/firstplace_plastics_robots_star3.html
. strip stroke parts arm: 150mm pneumatic, adjustable traverse stroke: 1600mm AC freq./inverter motor drive. Rack & pinion w/linear guides
Lewis & Clark | http://www.lewis-clark.com/product-tag/ekra-xprt-3/
: high to low 2010 EKRA XPRT3 Screen Printer Make: EKRA Model: XPRT 3 Vintage : 2010 Details: Stencil Cleaner with Vacuum Standard Camera with 2D Inspection Transport system with board/foil clamping option Squeegee Head with Traverse (belt driven) Condition: Complete