Sync in/out cable, 7 Pin Mini-DIN connector on one end and an 8 Pin Mini -DIN connector on the other, 1.5 ft Length (FM3/4 to FM3/4) SP1201-LCD Unidrive SP with LCD Keypad, 230Vac, Max Cont Output Current (hp): Normal Duty - 5.2A (1.5hp), Heavy Duty
Electronics Forum | Wed Mar 25 14:46:08 EDT 2020 | stephendo
What about designators? Using gerbers to program a pnp machine was always a last resort to be done only after much complaining and begging for proper CAD data. Back in the day I used UniCAM to program a mydata. After getting it figured out it was eas
Electronics Forum | Wed Mar 25 18:34:34 EDT 2020 | spoiltforchoice
> What about designators? Using gerbers to program > a pnp machine was always a last resort to be done > only after much complaining and begging for > proper CAD data. Back in the day I used UniCAM to > program a mydata. After gett
Industry News | 2019-11-12 11:22:19.0
BHC Cable Assemblies, Inc. is a contract manufacturer of high-end custom cable assemblies, mechanical assemblies and box builds for OEMs and Fortune 500 companies. Located in Burlington, ON Canada, the primary industries it serves include medical, robotic, airport security detection, aerospace and transportation. The company takes great pride in its reputation for working with its customers to meet all production requirements and schedules and in providing the highest quality products and services.
Industry News | 2007-08-02 17:44:00.0
ePSeries Printers at SMTAI Booth#329 and Nepcon East# 723
Technical Library | 2017-03-09 17:37:05.0
This article focuses on the fabrication and characterization of stretchable interconnects for wearable electronics applications. Interconnects were screen-printed with a stretchable silver-polymer composite ink on 50-μm thick thermoplastic polyurethane. The initial sheet resistances of the manufactured interconnects were an average of 36.2 mΩ/◽, and half the manufactured samples withstood single strains of up to 74%. The strain proportionality of resistance is discussed, and a regression model is introduced. Cycling strain increased resistance. However, the resistances here were almost fully reversible, and this recovery was time-dependent. Normalized resistances to 10%, 15%, and 20% cyclic strains stabilized at 1.3, 1.4, and 1.7. We also tested the validity of our model for radio-frequency applications through characterization of a stretchable radio-frequency identification tag.
Technical Library | 2014-05-29 13:48:14.0
Electronics packaging based on stress-engineered spring interconnects has the potential to enable integrated IC testing, fine pitch, and compliance not readily available with other technologies. We describe new spring contacts which simultaneously achieve low resistance ( 30 μm) in dense 2-D arrays (180 ~ 180-µm pitch). Mechanical characterization shows that individual springs operate at approximately 150-µN force. Electrical measurements and simulations imply that the interface contact resistance contribution to a single contact resistance is This paper suggests that integrated testing and packaging can be performed with the springs, enabling new capabilities for markets such as multichip modules.
Unisoft - Installation switches and MSI mass installation ≡ Menu Skip navigation Unisoft Intelligent Shop Floor Manufacturing Software Be production ready in minutes not days — it's about time!™ Home Contact Us
. Le brevet EP1568418 est en vigueur en France, en Allemagne, en Italie, en Espagne, en Suède, en Suisse et au Royaume-Uni. À propos de Nordson Corporation Nordson Corporation propose des solutions de technologie de