Electronics Forum: universal and board and support (Page 1 of 8)

Picking and placing coils with a universal In-Line 7

Electronics Forum | Wed Jan 09 11:46:45 EST 2019 | bane016

Maybe you have to contact your machine support they can modify special nozzle for that component...i dont know what else you can try...or just contact your support and ask them what to do...we had a similar problem with LED diode on our machine..and

Adaptable PCB support systems for use in pick and place machines?

Electronics Forum | Sat Aug 01 02:30:23 EDT 2015 | sarason

You could take a piece of aircraft grade aluminium, and machine you own. the advantage is you can set it up so you don't have to do any height compensation when you swap between a normal board, and your custom assembly sarason

Adaptable PCB support systems for use in pick and place machines?

Electronics Forum | Tue Aug 04 14:56:27 EDT 2015 | sarason

Adding to my previous message this could be solved fairly easily for the general case with a jig made from 3.2 - 4mm aluminium aircraft grade plate. you would machine the bottom side edges to give a 1.6 mm thickness, then machine the top side to leav

Re: IPC and Nepcon

Electronics Forum | Wed Nov 18 14:42:22 EST 1998 | Dave F

I heard somewhere that SMEMA has joined IPC, and that the association has decided to boycott Nepcon from year 2000. Can anyone tell me if this is true Nick: SMEMA and IPC are talking about merging (EP&P, 11/98, p 18). Below is a news release

Buying stenciling and pick and place equipement.

Electronics Forum | Fri Dec 17 18:21:43 EST 1999 | Clarissa L. Ortner

We are a small start up. We will be buying a stenciling machine and semi automated pick and place. ( We have the oven) We are presently stenciling without any assit and loading leadless parts only(no fine pitch) by hand. We need to improve thrupu

Manncorp Pick and Place

Electronics Forum | Wed Aug 06 11:16:20 EDT 2014 | clayton

While I have had very limited experience with mancorp, the experience I have had, has been less than satisfactory. However I do have a great deal of experience with Essemtec. I currently own two complete turnkey smt lines from Essemtec and couldn't

MPM Up2000 and SMEMA

Electronics Forum | Wed Sep 14 23:30:30 EDT 2016 | ariss_t

Hi, my 2cent.. u could try to check the sensibility of the camera board stop sensor.. maybe it detect something i.e support block.. do reply when u found the actual root cause.. thanks..

SMT Pick and Place

Electronics Forum | Thu May 28 10:57:10 EDT 1998 | John

Our company is currently looking to implement a SMT production line. What I am looking for is feedback on people's experiences with various machines. Here's what we are in the market for: Low/Mid volume 3,000+cph machine that can handle high job fle

Tooling and Fixtues

Electronics Forum | Sat Feb 06 16:42:18 EST 2021 | sg7914

Respected all; I am currently a student at RIT and working towards my master's in Manufacturing and Mechanical System Integration with a specialization in Electronics Manufacturing. I came across an interesting topic regarding the tooling and fixt

Mydata Pick and place

Electronics Forum | Wed May 09 12:07:52 EDT 2001 | caldon

My personal favorite is the Siemens F series and the UIC GSM platform. Both Siemens and UIC have awesome resources for csp, flipchip and baredie processing - Siemens= Dan Baldwin from GaTech; UIC = George Westby from UIC labs. My second choice would

  1 2 3 4 5 6 7 8 Next

universal and board and support searches for Companies, Equipment, Machines, Suppliers & Information