Electronics Forum | Tue Jun 14 11:57:21 EDT 2005 | ??
Are any of you guys out there using the vitronics xpm oven's having problems with the muffin fans dying on the top of the oven. Seems to me that they are using an inferior muffin fan that is not rated for the environment they are in. The fans have sl
Electronics Forum | Tue Jun 14 15:47:41 EDT 2005 | OverTheHill
Yes, the original fans were junk. I replaced them all with a ball bearing type. No problems for 3 years now. Manufacturer----- Rodale Phone No. 1-714-283-3140 Part No.---------- RC-A12M15HTB I think they were about $25.00 US bucks each back th
Electronics Forum | Wed Apr 11 12:17:05 EDT 2018 | randywoods
I need to perform maintenance. On reflow oven. I do not remeber procedure for opening. Hood for reflow oven. Vitronis Soltec XPM2.
Electronics Forum | Thu Apr 12 09:06:25 EDT 2018 | deanm
If its like our XPM3i there is a keyswitch on the right hand side of the console above the keyboard.
Electronics Forum | Thu Apr 12 09:54:46 EDT 2018 | randywoods
I have tried the key switch. When I shut down. From operator running production for the day. Normally you can us key switch. To open hood. I looked in service mode in PC to see if there was a option. To enable?
Electronics Forum | Fri Apr 27 10:43:19 EDT 2018 | robertbronx
Hi, Everyone!! I'm working with a Vitronics Xpm520 model and manufactured in 2001. My Question is: How I make a new default recipe? The simple way. I mean the simple like making it MANUALLY, without any kit or special equipment. Thank you all in adv
Electronics Forum | Tue Apr 10 13:55:31 EDT 2018 | robertbronx
Hi, Everyone!! In our company bough a Vitronics Soltec XPM520 Reflow but we don't have any manual of this equipment. Please I'm asking any PDF manual available. Thanks!!!! Best Regards
Electronics Forum | Fri Feb 25 16:16:01 EST 2005 | pjc
Here are some 5 zones models to look for: Electrovert OmniFlo5 Conceptronic HVA70 BTU VIP70 Vitronics SMR or XPM 520 Heller 1088 (4 zone)
Electronics Forum | Thu Mar 08 12:40:54 EST 2001 | Ralph Merk
We are currently using 0402 resistors and capacitors in our production process. Our equipment is as follows: - DEK 265 - Siemens S25/F5 - Vitronics XPM520(5 zones) - 2% silver solder Alpha WS678 The problem is that randomly some 0402 capacitors are
Electronics Forum | Thu Oct 28 15:17:43 EDT 2004 | russ
I would look at Vitronics-Soltec such as the XPM 820 or even the 520. BTU also makes very nice ovens. The Hellers I used to use went through blowers every 6 mos. and both of them came it defective. You must have got lucky or I got unlucky. Russ